ALG Defense

ALG Defense
View as List Grid

25 Items

per page
Set Descending Direction
In Stock
  1. 02-576 : ALG Defense Barrel Nut Wrench

    The ALG Defense Barrel Nut Wrench is a trick wrench designed to allow the user to apply the proper torque and index the barrel nut to the gas tube all at the same time. No torque wrench is required for the assembly of an ALG Defense rail system.

    Color: Purple

    Learn More
  2. 04-231-F : AK Recoil Spring

    ALG AK recoil spring is a one of a kind design, it is manufactured from chrome silicon steel resist impact shock and relaxation. The 2 to 3 dead coils in the center change the natural frequency of the spring, which prevents harmonics from damaging the spring and reducing its free length.

    Learn More
  3. 04-232-F : AK Braided Main Spring

    The ALG AK Braided Main Spring is a replacement spring for the AK47/74 platform rifles. This replacement option is manufactured in the United States from three strands of music wire braided together.

    Learn More
  4. 04-233-F : AK High Energy Main Spring

    The ALG High Energy MainSpring is a performance replacement spring for the AK47/74 platform rifles. It is a Chrome Silicon single wire spring fabricated per ASTM A401 specifications. The ALG High Energy Mainspring develops 25% more torque over a standard factory main spring, lowering lock time and also increasing the consistency of primer ignition.

    Learn More
  5. 05-198 : Quality Mil-Spec (QMS) Trigger
    The ALG Defense Quality Mil-Spec (QMS) Trigger is designed for those shooters where tradition, value and regulatory concerns are of primary importance. The pull of the QMS is very similar to a standard mil-spec trigger, however the majority of the associated grittiness of the stock trigger pull has been removed while the well known reliability of a stock trigger remains. The pull weight is not lower than the M4/M16 minimum weight specification of 5.5lbs. Learn More
  6. 05-199 : ALG Combat Trigger (ACT)

    The ALG Defense Advanced Combat Trigger (ACT) is designed for those shooters where tradition, value and regulatory concerns are of primary importance. The pull of the ACT is very similar to a standard mil-spec trigger, however it is sharper and the grittiness of the stock trigger pull has been removed while the traditional reliability of a stock trigger remains. The pull weight is not lower than the M4/M16 minimum weight specification of 5.5lbs.

    Note: HardLubing is ALG's term for electroless Nickel plating with an integral modifier to the base nickel plate. Either Boron or Teflon is used to enhance surface hardness, wear resistance and corrosion resistance and also create favorable tribological properties of the trigger components. Testing has shown that differential coating of the trigger parts contributes to the sharpness of the ACT's single stage pull.

    The trigger component is plated with Nickel-Boron which has a high surface hardness combined with excellent wear resistance. The color is a pleasing matte light grey that may be painted on non-functional surfaces if the shooter so desires (such as the trigger bow that is visible outside the lower receiver).

    The hammer, disconnector and trigger/hammer pins are plated with Nickel-Teflon which combines a low coefficient of friction with good wear resistance. The Teflon impregnation colors the metal a mottled, greyish/green. Parts coated with Nickel-Teflon cannot be painted. Both coatings are highly corrosion resistant eliminating the oil seal of traditional phosphated firearm components.

    Learn More
  7. 05-224B : Forged Sling Swivel (FSS)
    The ALG Forged QD Sling Swivel (FSS) is a lightweight yet heavy-duty sling swivel option. The standard QD configuration makes it compatible with any device that accepts QD accessories. The FSS weighs roughly 0.5 ounces and is about half the weight of similar steel QD sling swivel assemblies. The FSS is forged from 7075 T6 aluminum, which is the same aluminum and manufacturing process used to make mil-spec upper and lower receivers. This process allows the FSS to be strong enough to withstand pull forces of up to 800lbs. Learn More
  8. 05-224S : Forged Sling Swivel (FSS)

    The ALG Forged QD Sling Swivel (FSS) is a lightweight yet heavy-duty sling swivel option. The standard QD configuration makes it compatible with any device that accepts QD accessories. The FSS weighs roughly 0.5 ounces and is about half the weight of similar steel QD sling swivel assemblies. The FSS is forged from 7075 T6 aluminum, which is the same aluminum and manufacturing process used to make mil-spec upper and lower receivers. This process allows the FSS to be strong enough to withstand pull forces of up to 800lbs.

    Learn More
  9. 05-316B : 10" Ergonomic Modular Rail (EMR)- V2X

    The Ergonomic Modular Rail V2 with Magpul M-LOK support, allows the user to mount an array of third party accessories and customize their weapon platform to suit their needs. M-LOK accessories can be attached along the length of the rail at 2, 4, 6, 8 and 10 o'clock positions. The EMR V2 M-LOK also features two integrated anti-rotational QD slots at the base of the rail at the 2 and 10 o'clock positions.

    The primary difference between the EMR V2 and V1 is that the V2 has a machined M1913 picatinny rail section at the muzzle end of the rail at the 12' o'clock position. The machined M1913 section is ideal for attaching front sights, lasers, IR illuminators, lights and any other optic or sling related M1913
    compatible accessory.

    A co-witness accessory rail is available part number 05-295

    Learn More
  10. 05-318B : 13" Ergonomic Modular Rail (EMR)- V2X

    The Ergonomic Modular Rail V2 with Magpul M-LOK support, allows the user to mount an array of third party accessories and customize their weapon platform to suit their needs. M-LOK accessories can be attached along the length of the rail at 2, 4, 6, 8 and 10 o'clock positions. The EMR V2 M-LOK also features two integrated anti-rotational QD slots at the base of the rail at the 2 and 10 o'clock positions.

    The primary difference between the EMR V2 and V1 is that the V2 has a machined M1913 picatinny rail section at the muzzle end of the rail at the 12' o'clock position. The machined M1913 section is ideal for attaching front sights, lasers, IR illuminators, lights and any other optic or sling related M1913
    compatible accessory.

    A co-witness accessory rail is available part number 05-295

    Learn More
  11. 05-319B : 15" Ergonomic Modular Rail (EMR)- V2X

    The Ergonomic Modular Rail V2 with Magpul M-LOK support, allows the user to mount an array of third party accessories and customize their weapon platform to suit their needs. M-LOK accessories can be attached along the length of the rail at 2, 4, 6, 8 and 10 o'clock positions. The EMR V2 M-LOK also features two integrated anti-rotational QD slots at the base of the rail at the 2 and 10 o'clock positions.

    The primary difference between the EMR V2 and V1 is that the V2 has a machined M1913 picatinny rail section at the muzzle end of the rail at the 12' o'clock position. The machined M1913 section is ideal for attaching front sights, lasers, IR illuminators, lights and any other optic or sling related M1913
    compatible accessory.

    A co-witness accessory rail is available part number 05-295

    Learn More
  12. 05-320B : 10" Ergonomic Modular Rail (EMR)- V3X

    Like the V2, the V3 M-LOK support allows the user to mount an array of third party accessories and customize their weapon platform to suit their needs. Magpul M-LOK accessories can be attached along the length of the rail at 2, 4, 6, 8 and 10 o'clock positions.

    The EMR V3 M-LOK also features two integrated anti-rotational QD slots at the base of the rail at the 2 and 10 o'clock positions. The primary difference of the EMR V3 is its full-length M1913 picatinny rail at the 12 o'clock position. The machined M1913 section is ideal for attaching front sights, lasers, IR illuminators, lights and any other optic or sling related M1913 compatible accessory.

    A co-witness accessory rail is available part number 05-295

    Learn More
  13. 05-322B : 13" Ergonomic Modular Rail (EMR)- V3X

    Like the V2, the V3 M-LOK support allows the user to mount an array of third party accessories and customize their weapon platform to suit their needs. Magpul M-LOK accessories can be attached along the length of the rail at 2, 4, 6, 8 and 10 o'clock positions.

    The EMR V3 M-LOK also features two integrated anti-rotational QD slots at the base of the rail at the 2 and 10 o'clock positions. The primary difference of the EMR V3 is its full-length M1913 picatinny rail at the 12 o'clock position. The machined M1913 section is ideal for attaching front sights, lasers, IR illuminators, lights and any other optic or sling related M1913 compatible accessory.

    A co-witness accessory rail is available part number 05-295

    Learn More
  14. 05-323B : 15" Ergonomic Modular Rail (EMR)- V3X

    Like the V2, the V3 M-LOK support allows the user to mount an array of third party accessories and customize their weapon platform to suit their needs. Magpul M-LOK accessories can be attached along the length of the rail at 2, 4, 6, 8 and 10 o'clock positions.

    The EMR V3 M-LOK also features two integrated anti-rotational QD slots at the base of the rail at the 2 and 10 o'clock positions. The primary difference of the EMR V3 is its full-length M1913 picatinny rail at the 12 o'clock position. The machined M1913 section is ideal for attaching front sights, lasers, IR illuminators, lights and any other optic or sling related M1913 compatible accessory.

    A co-witness accessory rail is available part number 05-295

    Learn More
  15. 05-326 : ALG AKT Enhanced With Lightning Bow Trigger (AKT-EL)

    The ALG AK Trigger (AKT) is a single stage trigger designed for the AK47 and AK74 variant platforms. The AKT features a smoother and shorter trigger pull than the stock trigger and is ideal for combat and home defense use. It is machined from triple alloy steel and has a corrosion resistant Manganese Phosphate finish.

    The AKT features the Lightning Bow®, which produces a very comfortable feel to the user over the stock trigger, while enhancing trigger control. For OEMs and builders, the AKT lends three parts towards 922(r) Compliance.

    Learn More
  16. 05-327 : ALG AKT Ultimate With Lightning Bow Trigger (AKT-UL)

    The ALG AK Trigger Ultimate with Lightning Bow (AKT-UL) is a single stage trigger is designed for the AK47 and AK74 variant platforms. The AKT-UL features a shorter pull and a crisper reset than the AKT standard version which is ideal for precision and target shooting. It is machined from gun quality alloy steel.

    The AKT-UL features the Lightning Box, which produces a very comfortable feel to the user over the stock trigger, while enhancing trigger control. For OEMs and builders, the AKT-UL lends three parts towards 922(r) Compliance.

    Learn More
  17. 05-566 : ALG AKT Galil Ultimate With Lightning Bow (AGT-UL)

    The ALG Galil Trigger-Ultimate with Lightning Bow (AGT-UL) is a single stage trigger based on the AKT-UL and designed for the IWI Galil Ace rifle and pistol platform. The AGT-UL is machined from gun quality alloy steel and utilizes a Lightning Bow.

    The AKT-UL features a smooth trigger that is shorter and crisper than the stock 2 stage trigger. This design is ideal for precision and target shooting. The recommended pull weight of the AGT-UL is approximately 3.5 lbs.

    Learn More
  18. 08-133 : Lower Parts Kit with Grip (Less Trigger with Grip)

    This Kit comes with:

    Bolt Catch, Bolt Catch Plunger, Bolt Catch Spring, Bolt Catch Roll Pin, Mag Release, Mag Release Button, Mag Release Spring, Buffer Retainer Spring, Safety, Buffer Retainer, Safety Detent Spring, Safety Detent, Trigger Guard, Trigger Guard Roll Pin, Takedown Detent Springs, Takedown Detents, Takedown Pins, Grip.

    Learn More
  19. 16-001 : Lower Parts Kit + QMS

    Complete Lower Parts Kit with QMS Trigger

    This kit comes with:

    Bolt Catch, Bolt Catch Plunger, Bolt Catch Spring, Bolt Catch Roll Pin, Mag Release, Mag Release Button, Mag Release Spring, Buffer Retainer Spring, Safety, Buffer Retainer, Safety Detent Spring, Safety Detent, Trigger Guard, Trigger Guard Roll Pin, Takedown Detent Springs,Takedown Detents,Takedown Pins, QMS Trigger.

    Learn More
  20. 16-002 : Lower Parts Kit with Grip + QMS

    Complete Lower Parts Kit with QMS Trigger & Grip

    This kit comes with:

    Bolt Catch, Bolt Catch Plunger, Bolt Catch Spring, Bolt Catch Roll Pin, Mag Release, Mag Release Button, Mag Release Spring, Buffer Retainer Spring, Safety, Buffer Retainer, Safety Detent Spring, Safety Detent, Trigger Guard, Trigger Guard Roll Pin, Takedown Detent Springs,Takedown Detents,Takedown Pins, QMS Trigger, Grip.

    Learn More
  21. 16-003 : Lower Parts Kit + ACT

    AR15/M4 Mil-Spec Lower Parts Kit with ACT Trigger

    This kit comes with:

    Bolt Catch, Bolt Catch Plunger, Bolt Catch Spring, Bolt Catch Roll Pin, Mag Release, Mag Release Button, Mag Release Spring, Buffer Retainer Spring, Safety, Buffer Retainer, Safety Detent Spring, Safety Detent, Trigger Guard, Trigger Guard Roll Pin, Takedown Detent Springs, Takedown Detents, Takedown Pins, ACT Trigger.

    Learn More
  22. 16-004 : Lower Parts Kit with Grip + ACT

    AR15/M4 Mil-Spec Lower Parts Kit with ACT Trigger & Grip

    This kit comes with:

    Bolt Catch, Bolt Catch Plunger, Bolt Catch Spring, Bolt Catch Roll Pin, Mag Release, Mag Release Button, Mag Release Spring, Buffer Retainer Spring, Safety, Buffer Retainer, Safety Detent Spring, Safety Detent, Trigger Guard, Trigger Guard Roll Pin, Takedown Detent Springs, Takedown Detents, Takedown Pins, ACT Trigger, Grip

    Learn More
View as List Grid

25 Items

per page
Set Descending Direction
In Stock
*Estimated delivery could vary on some products.

Following a manufacturers price increase, we reserve the right to change product prices at any time without further notice.


© 2021 CAI is a registered trademark of Civil Arms Inc. -All rights reserved.