Bravo Company USA, Inc.

The BCM Extractor Spring is a heavy coil design made for the increased extractor tension required on many AR15, M4, M16 short barreled rifles. This product also improves the reliability on a standard 16" and 14.5" carbines.

As with all BCM branded products, the highest quality is the primary focus. Our BCM Extractor Spring is manufactured by a 9001:2000 facility employing the latest precision equipment. BCM starts with only the highest quality chrome silicon material, heat treats to stress relieve the product and shot peens to add increased strength.

This kit also includes the new black extractor insert, standard on all M4, M4A1, Mk18 carbines and the recent new standard on M16A4 rifles. The BCM Extractor Spring is so strong the Mil-Spec Crane O-Ring will probably not be needed, but it is included.

This kit includes:

• BCM Extractor Spring (chrome silicon, heat treated & stress relieved, shot peened)
• Crane Ind O-Ring (Mil-Spec)
• Black Extractor Insert

This Compensator was not designed as a gamers comp. It was designed for tactical applications to reduce muzzle rise, flash signature, noise, and lateral pressure.

The BCMGUNFIGHTER Compensator Mod 0-5.56.

• Exterior dimensions consistent with Mil-specs for mounting flash hider mounted suppressors.
• Tuned slots and interior cone offer maximum in recoil mitigations, compensation of muzzle-rise, and flash reduction.
• Designed to have much less side blast and noise associated with typical compensators. Makes it perfect for working in teams for CQB. It is a compensator that is built for the 21st Century Gunfighter!
• Nitride treated for maximum corrosion resistance
• Includes a Crush Washer
• Should be installed by a qualified armorer.

Threaded 1/2 x 28 for 5.56mm AR15 platforms.

This Compensator was not designed as a gamers comp. It was designed for tactical applications to reduce muzzle rise, flash signature, noise, and lateral pressure.

The BCMGUNFIGHTER Compensator Mod 1-5.56

• Tuned slots and interior cone offer maximum in recoil mitigations, compensation of muzzle-rise, and flash reduction.
• Dual action brake minimizes side pressure and designed to have much less noise associated with typical compensators. Makes it perfect for working in teams for CQB. It is a compensator that is built for the 21st Century Gunfighter!
• Stainless Steel construction for maximum corrosion resistance
• Predrilled hole at the base for permanent installation.
• Includes a Crush Washer
• Should be installed by a qualified armorer.

Threaded 1/2 x 28 for 5.56mm AR15 platforms.

Note: In order to install the muzzle device, you will need a "thin" wrench. A standard armorer's wrench or box wrench is too thick.

Extended version of the BCMGUNFIGHTER MOD 0 - 5.56.

Mount per BATF specs to bring your 14.5 inch barrel over 16 inches (non-NFA)

This Compensator was not designed as a gamers comp. It was designed for tactical applications to reduce muzzle rise, flash signature, noise, and lateral pressure.

The BCMGUNFIGHTER Compensator Mod 1-7.62 / 300 AAC Blackout.

• Tuned slots and interior cone offer maximum in recoil mitigations, compensation of muzzle-rise, and flash reduction.
• Dual action brake minimizes side pressure and designed to have much less noise associated with typical compensators. Makes it perfect for working in teams for CQB. It is a compensator that is built for the 21st Century Gunfighter!
• Stainless Steel construction for maximum corrosion resistance
• Includes a Crush Washer
• Should be installed by a qualified armorer.

Threaded 5/8 x 24 for 7.62mm AR10 and many 300 AAC® Blackout® barrels.

Note: In order to install the muzzle device, you will need a "thin" wrench. A standard armorer's wrench or box wrench is too thick.

Upon introduction of the M16 in the 1960s the manual of arms for shooting positions included a bladed stance with an extended elbow on the fire control side.

Because of numerous changes in the dynamics of the current fighting techniques we now virtually square off with the bad guy when engaging the target.

The Gun Fighter's Grip by BCM allows for a reduced angle and improved ergonomics when shooting in the modern gun fighting stances.

Made in the USA

Upon introduction of the M16 in the 1960s the manual of arms for shooting positions included a bladed stance with an extended elbow on the fire control side.

Because of numerous changes in the dynamics of the current fighting techniques we now virtually square off with the bad guy when engaging the target.

The Gun Fighter's Grip by BCM allows for a reduced angle and improved ergonomics when shooting in the modern gun fighting stances.

Made in the USA

Upon introduction of the M16 in the 1960s the manual of arms for shooting positions included a bladed stance with an extended elbow on the fire control side.

Because of numerous changes in the dynamics of the current fighting techniques we now virtually square off with the bad guy when engaging the target.

The Gun Fighter's Grip by BCM allows for a reduced angle and improved ergonomics when shooting in the modern gun fighting stances.

Made In the USA

Upon introduction of the M16 in the 1960s the manual of arms for shooting positions included a bladed stance with an extended elbow on the fire control side.

Because of numerous changes in the dynamics of the current fighting techniques we now virtually square off with the bad guy when engaging the target.

The Gun Fighter's Grip by BCM allows for a reduced angle and improved ergonomics when shooting in the modern gun fighting stances.

Made In the USA

Upon introduction of the M16 in the 1960s the manual of arms for shooting positions included a bladed stance with an extended elbow on the fire control side.

Because of numerous changes in the dynamics of the current fighting techniques we now virtually square off with the bad guy when engaging the target.

The Gun Fighter's Grip by BCM allows for a reduced angle and improved ergonomics when shooting in the modern gun fighting stances.

Made In the USA

Upon introduction of the M16 in the 1960s the manual of arms for shooting positions included a bladed stance with an extended elbow on the fire control side.

Because of numerous changes in the dynamics of the current fighting techniques we now virtually square off with the bad guy when engaging the target.

The Gun Fighter's Grip by BCM allows for a reduced angle and improved ergonomics when shooting in the modern gun fighting stances.

Made In the USA

Upon introduction of the M16 in the 1960s the manual of arms for shooting positions included a bladed stance with an extended elbow on the fire control side.

Because of numerous changes in the dynamics of the current fighting techniques we now virtually square off with the bad guy when engaging the target.

The Gun Fighter's Grip by BCM allows for a reduced angle and improved ergonomics when shooting in the modern gun fighting stances.

Made In the USA

Upon introduction of the M16 in the 1960s the manual of arms for shooting positions included a bladed stance with an extended elbow on the fire control side.

Because of numerous changes in the dynamics of the current fighting techniques we now virtually square off with the bad guy when engaging the target.

The Gun Fighter's Grip by BCM allows for a reduced angle and improved ergonomics when shooting in the modern gun fighting stances.

Made In the USA

The strongest light-weight polymer stock available for your mil-spec receiver extension is here!

Snag free Design. No sharp edges prevent tangling of the rifle with the shooter's sling, molle gear, or other kit.

Modular VBOST (Vehicle Borne Operations Sling Tab) - This tab interfaces with the shooter's riggers' band or bungee to secure the shooter's sling against the stock when the carbine is not in use.

Increasingly, this is the most common application when operating inside a vehicle.

2 different types of ambidextrous sling mounting options, including QD swivel sockets.

Integrated color matched rubber butt pad for secure shoulder placement, along with increased durability.

Simple modular design. 5 parts, and 1 screw allow for modular adaption of future stock options and configurations.

Available in Black, Flat Dark Earth, Foliage Green, and Wolf Gray.

United States Patent Number: 9,109,855

• The strongest light-weight polymer stock available for your mil-spec receiver extension is here!
• Snag free Design. No sharp edges prevent tangling of the rifle with the shooter's sling, molle gear, or other kit.
• Modular VBOST (Vehicle Borne Operations Sling Tab) - This tab interfaces with the shooter's riggers' band or bungee to secure the shooter's sling against the stock when the carbine is not in use.
• Increasingly, this is the most common application when operating inside a vehicle.
• 2 different types of ambidextrous sling mounting options, including QD swivel sockets.
• Integrated color matched rubber butt pad for secure shoulder placement, along with increased durability.
• Simple modular design. 5 parts, and 1 screw allow for modular adaption of future stock options and configurations.
• Available in Black, Flat Dark Earth, Foliage Green, and Wolf Gray.

United States Patent Number: 9,109,855

Bravo Company introduces the BCMGUNFIGHTERT Stock Assembly - Mod 0 - SOPMOD (Widebody).

The strongest light-weight polymer stock available for your mil-spec receiver extension is here!

• More pronounced cheekweld (SOPMOD type)
• Snag free Design. No sharp edges prevent tangling of the rifle with the shooter's sling, molle gear, or other kit.
• Modular VBOST (Vehicle Borne Operations Sling Tab) - This tab interfaces with the shooter's riggers' band or bungee to secure the shooter's sling against the stock when the carbine is not in use.
• Increasingly, this is the mostcommon application when operating inside a vehicle.
• 2 different types of ambidextrous sling mounting options, including QD swivel sockets.
• Integrated color matched rubber butt pad for secure shoulder placement, along with increased durability.
• Simple modular design. 5 parts, and 1 screw allow for modular adaption of future stock options and configurations.
• Available in Black, Flat Dark Earth.

United States Patent Number: 9,109,855

Bravo Company introduces the BCMGUNFIGHTERT Stock Assembly - Mod 0 - SOPMOD (Widebody).

The strongest light-weight polymer stock available for your mil-spec receiver extension is here!

• More pronounced cheekweld (SOPMOD type)
• Snag free Design. No sharp edges prevent tangling of the rifle with the shooter's sling, molle gear, or other kit.
• Modular VBOST (Vehicle Borne Operations Sling Tab) - This tab interfaces with the shooter's riggers' band or bungee to secure the shooter's sling against the stock when the carbine is not in use.
• Increasingly, this is the mostcommon application when operating inside a vehicle.
• 2 different types of ambidextrous sling mounting options, including QD swivel sockets.
• Integrated color matched rubber butt pad for secure shoulder placement, along with increased durability.
• Simple modular design. 5 parts, and 1 screw allow for modular adaption of future stock options and configurations.
• Available in Black, Flat Dark Earth.

United States Patent Number: 9,109,855

• The strongest light-weight polymer stock available for your mil-spec receiver extension is here!
• Snag free Design. No sharp edges prevent tangling of the rifle with the shooter's sling, molle gear, or other kit.
• Modular VBOST (Vehicle Borne Operations Sling Tab) - This tab interfaces with the shooter's riggers' band or bungee to secure the shooter's sling against the stock when the carbine is not in use.
• Increasingly, this is the most common application when operating inside a vehicle.
• 2 different types of ambidextrous sling mounting options, including QD swivel sockets.
• Integrated color matched rubber butt pad for secure shoulder placement, along with increased durability.
• Simple modular design. 5 parts, and 1 screw allow for modular adaption of future stock options and configurations.
• Available in Black, Flat Dark Earth, Foliage Green, and Wolf Gray.

Also includes:

• BCM 7075T6 Mil-Spec Receiver Extension
• Locking Nut M4 (Castle)
• Mil-Spec Carbine Action Spring
• Carbine Buffer
• BCM QD Swivel Mount End Plate

As all BCM products, ALL parts are Made in the USA.

United States Patent Number: 9,109,855

• The strongest light-weight polymer stock available for your mil-spec receiver extension is here!
• Snag free Design. No sharp edges prevent tangling of the rifle with the shooter's sling, molle gear, or other kit.
• Modular VBOST (Vehicle Borne Operations Sling Tab) - This tab interfaces with the shooter's riggers' band or bungee to secure the shooter's sling against the stock when the carbine is not in use.
• Increasingly, this is the most common application when operating inside a vehicle.
• 2 different types of ambidextrous sling mounting options, including QD swivel sockets.
• Integrated color matched rubber butt pad for secure shoulder placement, along with increased durability.
• Simple modular design. 5 parts, and 1 screw allow for modular adaption of future stock options and configurations.
• Available in Black, Flat Dark Earth, Foliage Green, and Wolf Gray.

Also includes:

• BCM 7075T6 Mil-Spec Receiver Extension
• Locking Nut M4 (Castle)
• Mil-Spec Carbine Action Spring
• Carbine Buffer
• BCM QD Swivel Mount End Plate

As all BCM products, ALL parts are Made in the USA.

United States Patent Number: 9,109,855

The strongest light-weight polymer stock available for your mil-spec receiver extension is here!

• More pronounced cheekweld (SOPMOD type)
• Snag free Design. No sharp edges prevent tangling of the rifle with the shooter's sling, molle gear, or other kit.
• Modular VBOST (Vehicle Borne Operations Sling Tab) - This tab interfaces with the shooter's riggers' band or bungee to secure the shooter's sling against the stock when the carbine is not in use.
• Increasingly, this is the mostcommon application when operating inside a vehicle.
• 2 different types of ambidextrous sling mounting options, including QD swivel sockets.
• Integrated color matched rubber butt pad for secure shoulder placement, along with increased durability.
• Simple modular design. 5 parts, and 1 screw allow for modular adaption of future stock options and configurations.
• Available in Black, Flat Dark Earth.

Also includes:

• BCM 7075T6 Mil-Spec Receiver Extension
• Locking Nut M4 (Castle)
• Mil-Spec Carbine Action Spring
• Carbine Buffer
• BCM QD Swivel Mount End Plate

The strongest light-weight polymer stock available for your mil-spec receiver extension is here!

• More pronounced cheekweld (SOPMOD type)
• Snag free Design. No sharp edges prevent tangling of the rifle with the shooter's sling, molle gear, or other kit.
• Modular VBOST (Vehicle Borne Operations Sling Tab) - This tab interfaces with the shooter's riggers' band or bungee to secure the shooter's sling against the stock when the carbine is not in use.
• Increasingly, this is the mostcommon application when operating inside a vehicle.
• 2 different types of ambidextrous sling mounting options, including QD swivel sockets.
• Integrated color matched rubber butt pad for secure shoulder placement, along with increased durability.
• Simple modular design. 5 parts, and 1 screw allow for modular adaption of future stock options and configurations.
• Available in Black, Flat Dark Earth.

Also includes:

• BCM 7075T6 Mil-Spec Receiver Extension
• Locking Nut M4 (Castle)
• Mil-Spec Carbine Action Spring
• Carbine Buffer
• BCM QD Swivel Mount End Plate

The BCMGUNFIGHTERT Trigger Guard, AR-15 Type Series Trigger Guard, Mod 0.

• Ergonomically correct shape and contour
• No sharp edges, which enhances shooter's comfort
• Compatible with "duck-billed" grips
• Made of impact resistant polymer
• Like all BCM® products- Made in the USA
• Includes set screw and roll pin

Note: Professional installation by a qualified gunsmith is required.

The BCMGUNFIGHTERT Trigger Guard, AR-15 Type Series Trigger Guard, Mod 0.

• Ergonomically correct shape and contour
• No sharp edges, which enhances shooter's comfort
• Compatible with "duck-billed" grips
• Made of impact resistant polymer
• Like all BCM® products- Made in the USA
• Includes set screw and roll pin

Note: Professional installation by a qualified gunsmith is required.

The BCMGUNFIGHTERT Trigger Guard, AR-15 Type Series Trigger Guard, Mod 0.

• Ergonomically correct shape and contour
• No sharp edges, which enhances shooter's comfort
• Compatible with "duck-billed" grips
• Made of impact resistant polymer
• Like all BCM® products- Made in the USA
• Includes set screw and roll pin

Note: Professional installation by a qualified gunsmith is required.

The BCMGUNFIGHTERT Trigger Guard, AR-15 Type Series Trigger Guard, Mod 0.

• Ergonomically correct shape and contour
• No sharp edges, which enhances shooter's comfort
• Compatible with "duck-billed" grips
• Made of impact resistant polymer
• Like all BCM® products- Made in the USA
• Includes set screw and roll pin

Note: Professional installation by a qualified gunsmith is required.

The KAG is the end result of collaboration between BCM® and Travis Haley, founder of Haley Strategic Partners and inventor of multiple weapons manipulation enhancements in the firearms industry. Designed to complement modern shooting grips, the Kinesthetic Angled Grip (KAG) uses a biomechanically efficient forward rake to create an interface for positive retention and joint relief to the wrist, elbow, and shoulder, allowing for smooth weapon manipulation without substantial increase to the girth of the weapon system. Textured on both front and back, the profile of the KAG creates a channel for consistent and positive engagement which translates directly into improved efficiency in weapons manipulation and target to target transitions.

The new Patent Pending BCM® Direct Mount Picatinny 1913 interface system, was developed to be the most rigid, light-weight, and cost effective system available for Vertical Pistol Grips and Hand Stop type accessories. Most of the industry relies on a simple screw and backing nut for a mounting system. BCM® has developed a patent pending anchor system that not only secures to the mounting surface, but spreads the energy and force throughout the accessory. Conventional mounting systems can allow for an increased amount of shifting and flexing of the accessory. The BCM® direct mount interface system reduces those issues and offers a more secure lockup, eliminating play in the mounting surface.

Direct Attach Picatinny 1913 Rail Version:

• Forward rake gives positive retention when using "C-clamp" (thumb over bore) method of handguard support
• Works as a rest for supported firing positions
• Slight angle without significant bulk adds just the right amount of relief to the wrist without substantially increasing the girth of the handguard
• Small profile is just enough to get repeatable hand position on weapon for-end
• Innovative patent pending attachment method allows for robust clamping and alignment with minimal hardware and slender accessory size
• Textured in front and back for positive engagement
• Made from high quality, impact resistant polymers.

Made in the USA.

The KAG is the end result of collaboration between BCM® and Travis Haley, founder of Haley Strategic Partners and inventor of multiple weapons manipulation enhancements in the firearms industry. Designed to complement modern shooting grips, the Kinesthetic Angled Grip (KAG) uses a biomechanically efficient forward rake to create an interface for positive retention and joint relief to the wrist, elbow, and shoulder, allowing for smooth weapon manipulation without substantial increase to the girth of the weapon system. Textured on both front and back, the profile of the KAG creates a channel for consistent and positive engagement which translates directly into improved efficiency in weapons manipulation and target to target transitions.

The new Patent Pending BCM® Direct Mount Picatinny 1913 interface system, was developed to be the most rigid, light-weight, and cost effective system available for Vertical Pistol Grips and Hand Stop type accessories. Most of the industry relies on a simple screw and backing nut for a mounting system. BCM® has developed a patent pending anchor system that not only secures to the mounting surface, but spreads the energy and force throughout the accessory. Conventional mounting systems can allow for an increased amount of shifting and flexing of the accessory. The BCM® direct mount interface system reduces those issues and offers a more secure lockup, eliminating play in the mounting surface.

Direct Attach Picatinny 1913 Rail Version:

• Forward rake gives positive retention when using "C-clamp" (thumb over bore) method of handguard support
• Works as a rest for supported firing positions
• Slight angle without significant bulk adds just the right amount of relief to the wrist without substantially increasing the girth of the handguard
• Small profile is just enough to get repeatable hand position on weapon for-end
• Innovative patent pending attachment method allows for robust clamping and alignment with minimal hardware and slender accessory size
• Textured in front and back for positive engagement
• Made from high quality, impact resistant polymers.

Made in the USA.

The KAG is the end result of collaboration between BCM® and Travis Haley, founder of Haley Strategic Partners and inventor of multiple weapons manipulation enhancements in the firearms industry. Designed to complement modern shooting grips, the Kinesthetic Angled Grip (KAG) uses a biomechanically efficient forward rake to create an interface for positive retention and joint relief to the wrist, elbow, and shoulder, allowing for smooth weapon manipulation without substantial increase to the girth of the weapon system. Textured on both front and back, the profile of the KAG creates a channel for consistent and positive engagement which translates directly into improved efficiency in weapons manipulation and target to target transitions.

The new Patent Pending BCM® Direct Mount Picatinny 1913 interface system, was developed to be the most rigid, light-weight, and cost effective system available for Vertical Pistol Grips and Hand Stop type accessories. Most of the industry relies on a simple screw and backing nut for a mounting system. BCM® has developed a patent pending anchor system that not only secures to the mounting surface, but spreads the energy and force throughout the accessory. Conventional mounting systems can allow for an increased amount of shifting and flexing of the accessory. The BCM® direct mount interface system reduces those issues and offers a more secure lockup, eliminating play in the mounting surface.

Direct Attach Picatinny 1913 Rail Version:

• Forward rake gives positive retention when using "C-clamp" (thumb over bore) method of handguard support
• Works as a rest for supported firing positions
• Slight angle without significant bulk adds just the right amount of relief to the wrist without substantially increasing the girth of the handguard
• Small profile is just enough to get repeatable hand position on weapon for-end
• Innovative patent pending attachment method allows for robust clamping and alignment with minimal hardware and slender accessory size
• Textured in front and back for positive engagement
• Made from high quality, impact resistant polymers.

Made in the USA.

The KAG is the end result of collaboration between BCM® and Travis Haley, founder of Haley Strategic Partners and inventor of multiple weapons manipulation enhancements in the firearms industry. Designed to complement modern shooting grips, the Kinesthetic Angled Grip (KAG) uses a biomechanically efficient forward rake to create an interface for positive retention and joint relief to the wrist, elbow, and shoulder, allowing for smooth weapon manipulation without substantial increase to the girth of the weapon system. Textured on both front and back, the profile of the KAG creates a channel for consistent and positive engagement which translates directly into improved efficiency in weapons manipulation and target to target transitions.

The new Patent Pending BCM® Direct Mount Picatinny 1913 interface system, was developed to be the most rigid, light-weight, and cost effective system available for Vertical Pistol Grips and Hand Stop type accessories. Most of the industry relies on a simple screw and backing nut for a mounting system. BCM® has developed a patent pending anchor system that not only secures to the mounting surface, but spreads the energy and force throughout the accessory. Conventional mounting systems can allow for an increased amount of shifting and flexing of the accessory. The BCM® direct mount interface system reduces those issues and offers a more secure lockup, eliminating play in the mounting surface.

Direct Attach Picatinny 1913 Rail Version:

• Forward rake gives positive retention when using "C-clamp" (thumb over bore) method of handguard support
• Works as a rest for supported firing positions
• Slight angle without significant bulk adds just the right amount of relief to the wrist without substantially increasing the girth of the handguard
• Small profile is just enough to get repeatable hand position on weapon for-end
• Innovative patent pending attachment method allows for robust clamping and alignment with minimal hardware and slender accessory size
• Textured in front and back for positive engagement
• Made from high quality, impact resistant polymers.

Made in the USA.

The KAG is the end result of collaboration between BCM® and Travis Haley, founder of Haley Strategic Partners and inventor of multiple weapons manipulation enhancements in the firearms industry.

Designed to complement modern shooting grips, the Kinesthetic Angled Grip (KAG) uses a biomechanically efficient forward rake to create an interface for positive retention and joint relief to the wrist, elbow, and shoulder, allowing for smooth weapon manipulation without substantial increase to the girth of the weapon system. Textured on both front and back, the profile of the KAG creates a channel for consistent and positive engagement which translates directly into improved efficiency in weapons manipulation and target to target transitions.

• Forward rake gives positive retention when using "C-clamp" (thumb over bore) method of handguard support
• Works as a rest for supported firing positions
• Slight angle without significant bulk adds just the right amount of relief to the wrist without substantially increasing the girth of the handguard
• Small profile is just enough to get repeatable hand position on weapon for-end
• Innovative patent pending attachment method allows for robust clamping and alignment with minimal hardware and slender accessory size
• Textured in front and back for positive engagement
• Made from high quality, impact resistant polymers.

Made in the USA

The KAG is the end result of collaboration between BCM® and Travis Haley, founder of Haley Strategic Partners and inventor of multiple weapons manipulation enhancements in the firearms industry. Designed to complement modern shooting grips, the Kinesthetic Angled Grip (KAG) uses a biomechanically efficient forward rake to create an interface for positive retention and joint relief to the wrist, elbow, and shoulder, allowing for smooth weapon manipulation without substantial increase to the girth of the weapon system. Textured on both front and back, the profile of the KAG creates a channel for consistent and positive engagement which translates directly into improved efficiency in weapons manipulation and target to target transitions.

The new Patent Pending BCM® Direct Mount Picatinny 1913 interface system, was developed to be the most rigid, light-weight, and cost effective system available for Vertical Pistol Grips and Hand Stop type accessories. Most of the industry relies on a simple screw and backing nut for a mounting system. BCM® has developed a patent pending anchor system that not only secures to the mounting surface, but spreads the energy and force throughout the accessory. Conventional mounting systems can allow for an increased amount of shifting and flexing of the accessory. The BCM® direct mount interface system reduces those issues and offers a more secure lockup, eliminating play in the mounting surface.

Direct Attach Picatinny 1913 Rail Version:

• Forward rake gives positive retention when using "C-clamp" (thumb over bore) method of handguard support
• Works as a rest for supported firing positions
• Slight angle without significant bulk adds just the right amount of relief to the wrist without substantially increasing the girth of the handguard
• Small profile is just enough to get repeatable hand position on weapon for-end
• Innovative patent pending attachment method allows for robust clamping and alignment with minimal hardware and slender accessory size
• Textured in front and back for positive engagement
• Made from high quality, impact resistant polymers.

Made in the USA.

The KAG is the end result of collaboration between BCM® and Travis Haley, founder of Haley Strategic Partners and inventor of multiple weapons manipulation enhancements in the firearms industry. Designed to complement modern shooting grips, the Kinesthetic Angled Grip (KAG) uses a biomechanically efficient forward rake to create an interface for positive retention and joint relief to the wrist, elbow, and shoulder, allowing for smooth weapon manipulation without substantial increase to the girth of the weapon system. Textured on both front and back, the profile of the KAG creates a channel for consistent and positive engagement which translates directly into improved efficiency in weapons manipulation and target to target transitions.

The new Patent Pending BCM® Direct Mount Picatinny 1913 interface system, was developed to be the most rigid, light-weight, and cost effective system available for Vertical Pistol Grips and Hand Stop type accessories. Most of the industry relies on a simple screw and backing nut for a mounting system. BCM® has developed a patent pending anchor system that not only secures to the mounting surface, but spreads the energy and force throughout the accessory. Conventional mounting systems can allow for an increased amount of shifting and flexing of the accessory. The BCM® direct mount interface system reduces those issues and offers a more secure lockup, eliminating play in the mounting surface.

Direct Attach Picatinny 1913 Rail Version:

• Forward rake gives positive retention when using "C-clamp" (thumb over bore) method of handguard support
• Works as a rest for supported firing positions
• Slight angle without significant bulk adds just the right amount of relief to the wrist without substantially increasing the girth of the handguard
• Small profile is just enough to get repeatable hand position on weapon for-end
• Innovative patent pending attachment method allows for robust clamping and alignment with minimal hardware and slender accessory size
• Textured in front and back for positive engagement
• Made from high quality, impact resistant polymers.

Made in the USA.

Rail section is made of Hard Anodized Aircraft Aluminum Alloy.

• Mounting hardware is made of Corrosion Resistant Stainless Steel
• Available it three popular colors: Black, Flat Dark Earth and Foliage Green
• Made to the Mil-Standard 1913 Picatinny Arsenal Specifications.
• Available is three Lengths: 3-inch (5 slot), 4-inch (7 slot) and 5.5-inch (11 slot)
• Features a Snag resistant design, while retaining Mil-Standards specs.
• Self-contained assembly, eliminates the possible loss of mounting hardware.
• Fits ALL KeyMod interface mounting surfaces.

Note: Nylon/Polymer Picatinny rail sections are for NON-load bearing accessories only. For load bearing accessories, we recommend aluminum Picatinny rail sections. Do NOT exceed 20 in-lbs. when securing KeyModT Fasteners on Polymer accessories. Aluminum Picatinny rail sections may be torqued to 30 in-lbs.

Rail section is made of Hard Anodized Aircraft Aluminum Alloy.

• Mounting hardware is made of Corrosion Resistant Stainless Steel
• Available it three popular colors: Black, Flat Dark Earth and Foliage Green
• Made to the Mil-Standard 1913 Picatinny Arsenal Specifications.
• Available is three Lengths: 3-inch (5 slot), 4-inch (7 slot) and 5.5-inch (11 slot)
• Features a Snag resistant design, while retaining Mil-Standards specs.
• Self-contained assembly, eliminates the possible loss of mounting hardware.
• Fits ALL KeyMod interface mounting surfaces.

Note: Nylon/Polymer Picatinny rail sections are for NON-load bearing accessories only. For load bearing accessories, we recommend aluminum Picatinny rail sections. Do NOT exceed 20 in-lbs. when securing KeyModT Fasteners on Polymer accessories. Aluminum Picatinny rail sections may be torqued to 30 in-lbs.

Rail section is made of Hard Anodized Aircraft Aluminum Alloy.

• Mounting hardware is made of Corrosion Resistant Stainless Steel
• Available it three popular colors: Black, Flat Dark Earth and Foliage Green
• Made to the Mil-Standard 1913 Picatinny Arsenal Specifications.
• Available is three Lengths: 3-inch (5 slot), 4-inch (7 slot) and 5.5-inch (11 slot)
• Features a Snag resistant design, while retaining Mil-Standards specs.
• Self-contained assembly, eliminates the possible loss of mounting hardware.
• Fits ALL KeyMod interface mounting surfaces.

Note: Nylon/Polymer Picatinny rail sections are for NON-load bearing accessories only. For load bearing accessories, we recommend aluminum Picatinny rail sections. Do NOT exceed 20 in-lbs. when securing KeyModT Fasteners on Polymer accessories. Aluminum Picatinny rail sections may be torqued to 30 in-lbs.

Rail section is made of Lightweight Impact Resistant Polymer.

• Mounting hardware is made of Corrosion Resistant Stainless Steel
• Available it three popular colors: Black, Flat Dark Earth and Foliage Green
• Made to the Mil-Standard 1913 Picatinny Arsenal Specifications.
• Available is three Lengths: 3-inch (5 slot), 4-inch (7 slot) and 5.5-inch (11 slot)
• Features a Snag resistant design, while retaining Mil-Standards specs.
• Self-contained assembly, eliminates the possible loss of mounting hardware.
• Fits ALL KeyMod interface mounting surfaces.

Note: Nylon/Polymer Picatinny rail sections are for NON-load bearing accessories only. For load bearing accessories, we recommend aluminum Picatinny rail sections. Do NOT exceed 20 in-lbs. when securing KeyModT Fasteners on Polymer accessories. Aluminum Picatinny rail sections may be torqued to 30 in-lbs.

Rail section is made of Lightweight Impact Resistant Polymer.

• Mounting hardware is made of Corrosion Resistant Stainless Steel
• Available it three popular colors: Black, Flat Dark Earth and Foliage Green
• Made to the Mil-Standard 1913 Picatinny Arsenal Specifications.
• Available is three Lengths: 3-inch (5 slot), 4-inch (7 slot) and 5.5-inch (11 slot)
• Features a Snag resistant design, while retaining Mil-Standards specs.
• Self-contained assembly, eliminates the possible loss of mounting hardware.
• Fits ALL KeyMod interface mounting surfaces.

Note: Nylon/Polymer Picatinny rail sections are for NON-load bearing accessories only. For load bearing accessories, we recommend aluminum Picatinny rail sections. Do NOT exceed 20 in-lbs. when securing KeyModT Fasteners on Polymer accessories. Aluminum Picatinny rail sections may be torqued to 30 in-lbs.

Rail section is made of Lightweight Impact Resistant Polymer.

• Mounting hardware is made of Corrosion Resistant Stainless Steel
• Available it three popular colors: Black, Flat Dark Earth and Foliage Green
• Made to the Mil-Standard 1913 Picatinny Arsenal Specifications.
• Available is three Lengths: 3-inch (5 slot), 4-inch (7 slot) and 5.5-inch (11 slot)
• Features a Snag resistant design, while retaining Mil-Standards specs.
• Self-contained assembly, eliminates the possible loss of mounting hardware.
• Fits ALL KeyMod interface mounting surfaces.

Note: Nylon/Polymer Picatinny rail sections are for NON-load bearing accessories only. For load bearing accessories, we recommend aluminum Picatinny rail sections. Do NOT exceed 20 in-lbs. when securing KeyModT Fasteners on Polymer accessories. Aluminum Picatinny rail sections may be torqued to 30 in-lbs.

Rail section is made of Lightweight Impact Resistant Polymer.

• Mounting hardware is made of Corrosion Resistant Stainless Steel
• Available it three popular colors: Black, Flat Dark Earth and Foliage Green
• Made to the Mil-Standard 1913 Picatinny Arsenal Specifications.
• Available is three Lengths: 3-inch (5 slot), 4-inch (7 slot) and 5.5-inch (11 slot)
• Features a Snag resistant design, while retaining Mil-Standards specs.
• Self-contained assembly, eliminates the possible loss of mounting hardware.
• Fits ALL KeyMod interface mounting surfaces.

Note: Nylon/Polymer Picatinny rail sections are for NON-load bearing accessories only. For load bearing accessories, we recommend aluminum Picatinny rail sections. Do NOT exceed 20 in-lbs. when securing KeyModT Fasteners on Polymer accessories. Aluminum Picatinny rail sections may be torqued to 30 in-lbs.

Rail section is made of Lightweight Impact Resistant Polymer.

• Mounting hardware is made of Corrosion Resistant Stainless Steel
• Available it three popular colors: Black, Flat Dark Earth and Foliage Green
• Made to the Mil-Standard 1913 Picatinny Arsenal Specifications.
• Available is three Lengths: 3-inch (5 slot), 4-inch (7 slot) and 5.5-inch (11 slot)
• Features a Snag resistant design, while retaining Mil-Standards specs.
• Self-contained assembly, eliminates the possible loss of mounting hardware.
• Fits ALL KeyMod interface mounting surfaces.

Note: Nylon/Polymer Picatinny rail sections are for NON-load bearing accessories only. For load bearing accessories, we recommend aluminum Picatinny rail sections. Do NOT exceed 20 in-lbs. when securing KeyModT Fasteners on Polymer accessories. Aluminum Picatinny rail sections may be torqued to 30 in-lbs.

Rail section is made of Lightweight Impact Resistant Polymer.

• Mounting hardware is made of Corrosion Resistant Stainless Steel
• Available it three popular colors: Black, Flat Dark Earth and Foliage Green
• Made to the Mil-Standard 1913 Picatinny Arsenal Specifications.
• Available is three Lengths: 3-inch (5 slot), 4-inch (7 slot) and 5.5-inch (11 slot)
• Features a Snag resistant design, while retaining Mil-Standards specs.
• Self-contained assembly, eliminates the possible loss of mounting hardware.
• Fits ALL KeyMod interface mounting surfaces.

Note: Nylon/Polymer Picatinny rail sections are for NON-load bearing accessories only. For load bearing accessories, we recommend aluminum Picatinny rail sections. Do NOT exceed 20 in-lbs. when securing KeyModT Fasteners on Polymer accessories. Aluminum Picatinny rail sections may be torqued to 30 in-lbs.