Bravo Company USA, Inc.

Rail section is made of Lightweight Impact Resistant Polymer.

• Mounting hardware is made of Corrosion Resistant Stainless Steel
• Available it three popular colors: Black, Flat Dark Earth and Foliage Green
• Made to the Mil-Standard 1913 Picatinny Arsenal Specifications.
• Available is three Lengths: 3-inch (5 slot), 4-inch (7 slot) and 5.5-inch (11 slot)
• Features a Snag resistant design, while retaining Mil-Standards specs.
• Self-contained assembly, eliminates the possible loss of mounting hardware.
• Fits ALL KeyMod interface mounting surfaces.

Note: Nylon/Polymer Picatinny rail sections are for NON-load bearing accessories only. For load bearing accessories, we recommend aluminum Picatinny rail sections. Do NOT exceed 20 in-lbs. when securing KeyModT Fasteners on Polymer accessories. Aluminum Picatinny rail sections may be torqued to 30 in-lbs.

Rail section is made of Lightweight Impact Resistant Polymer.

• Mounting hardware is made of Corrosion Resistant Stainless Steel
• Available it three popular colors: Black, Flat Dark Earth and Foliage Green
• Made to the Mil-Standard 1913 Picatinny Arsenal Specifications.
• Available is three Lengths: 3-inch (5 slot), 4-inch (7 slot) and 5.5-inch (11 slot)
• Features a Snag resistant design, while retaining Mil-Standards specs.
• Self-contained assembly, eliminates the possible loss of mounting hardware.
• Fits ALL KeyMod interface mounting surfaces.

Note: Nylon/Polymer Picatinny rail sections are for NON-load bearing accessories only. For load bearing accessories, we recommend aluminum Picatinny rail sections. Do NOT exceed 20 in-lbs. when securing KeyModT Fasteners on Polymer accessories. Aluminum Picatinny rail sections may be torqued to 30 in-lbs.

Rail section is made of Lightweight Impact Resistant Polymer.

• Mounting hardware is made of Corrosion Resistant Stainless Steel
• Available it three popular colors: Black, Flat Dark Earth and Foliage Green
• Made to the Mil-Standard 1913 Picatinny Arsenal Specifications.
• Available is three Lengths: 3-inch (5 slot), 4-inch (7 slot) and 5.5-inch (11 slot)
• Features a Snag resistant design, while retaining Mil-Standards specs.
• Self-contained assembly, eliminates the possible loss of mounting hardware.
• Fits ALL KeyMod interface mounting surfaces.

Note: Nylon/Polymer Picatinny rail sections are for NON-load bearing accessories only. For load bearing accessories, we recommend aluminum Picatinny rail sections. Do NOT exceed 20 in-lbs. when securing KeyModT Fasteners on Polymer accessories. Aluminum Picatinny rail sections may be torqued to 30 in-lbs.

Rail section is made of Lightweight Impact Resistant Polymer.

• Mounting hardware is made of Corrosion Resistant Stainless Steel
• Available it three popular colors: Black, Flat Dark Earth and Foliage Green
• Made to the Mil-Standard 1913 Picatinny Arsenal Specifications.
• Available is three Lengths: 3-inch (5 slot), 4-inch (7 slot) and 5.5-inch (11 slot)
• Features a Snag resistant design, while retaining Mil-Standards specs.
• Self-contained assembly, eliminates the possible loss of mounting hardware.
• Fits ALL KeyMod interface mounting surfaces.

Note: Nylon/Polymer Picatinny rail sections are for NON-load bearing accessories only. For load bearing accessories, we recommend aluminum Picatinny rail sections. Do NOT exceed 20 in-lbs. when securing KeyModT Fasteners on Polymer accessories. Aluminum Picatinny rail sections may be torqued to 30 in-lbs.

Rail section is made of Lightweight Impact Resistant Polymer.

• Mounting hardware is made of Corrosion Resistant Stainless Steel
• Available it three popular colors: Black, Flat Dark Earth and Foliage Green
• Made to the Mil-Standard 1913 Picatinny Arsenal Specifications.
• Available is three Lengths: 3-inch (5 slot), 4-inch (7 slot) and 5.5-inch (11 slot)
• Features a Snag resistant design, while retaining Mil-Standards specs.
• Self-contained assembly, eliminates the possible loss of mounting hardware.
• Fits ALL KeyMod interface mounting surfaces.

Note: Nylon/Polymer Picatinny rail sections are for NON-load bearing accessories only. For load bearing accessories, we recommend aluminum Picatinny rail sections. Do NOT exceed 20 in-lbs. when securing KeyModT Fasteners on Polymer accessories. Aluminum Picatinny rail sections may be torqued to 30 in-lbs.

Rail section is made of Lightweight Impact Resistant Polymer.

• Mounting hardware is made of Corrosion Resistant Stainless Steel
• Available it three popular colors: Black, Flat Dark Earth and Foliage Green
• Made to the Mil-Standard 1913 Picatinny Arsenal Specifications.
• Available is three Lengths: 3-inch (5 slot), 4-inch (7 slot) and 5.5-inch (11 slot)
• Features a Snag resistant design, while retaining Mil-Standards specs.
• Self-contained assembly, eliminates the possible loss of mounting hardware.
• Fits ALL KeyMod interface mounting surfaces.

Note: Nylon/Polymer Picatinny rail sections are for NON-load bearing accessories only. For load bearing accessories, we recommend aluminum Picatinny rail sections. Do NOT exceed 20 in-lbs. when securing KeyModT Fasteners on Polymer accessories. Aluminum Picatinny rail sections may be torqued to 30 in-lbs.

All the advantages and features of Bravo Company's KeyModT Rail, now available in 100% aluminum. Manufactured from aluminum, it is lightweight yet durable.

Also featuring a proprietary patent pending mounting, indexing and lock up system that mitigates 12:00 rail movement under heat generated from the barrel nut.

• Handguard alone weighs 6.2 oz
• 1.3" Inner Diameter1.5" OUTSIDE flat to flat.
• Handguard flares forward (towards muzzle end) at the 3 and 9 O'clock positions approximately 1/4".
• Actual length when measured to flare is 10.5"
• Mounting hardware, 2.4oz, for a total of 8.6oz on a 10" rail.

All the advantages and features of Bravo Company's KeyModT Rail, now available in 100% aluminum.

Manufactured from aluminum, it is lightweight yet durable. Also featuring a proprietary patent pending mounting, indexing and lock up system that mitigates 12:00 rail movement under heat generated from the barrel nut.

• Handguard alone weighs 7.8 oz
• 1.3" Inner Diameter
• 1.5" OUTSIDE flat to flat.
• Handguard flares forward (towards muzzle end) at the 3 and 9 O'clock positions approximately 1/4"
• Actual length when measured to flare is 13.4"
• Mounting hardware, 2.4oz, for a total of 10.2oz on a very long 13" rail.

All the advantages and features of Bravo Company's KeyModT Rail, now available in 100% aluminum.

Manufactured from aluminum, it is lightweight yet durable. Also featuring a proprietary patent pending mounting, indexing and lock up system that mitigates 12:00 rail movement under heat generated from the barrel nut.

• Handguard alone weighs 8.6 oz
• 1.3" Inner Diameter
• 1.5" OUTSIDE flat to flat.
• Handguard flares forward (towards muzzle end) at the 3 and 9 O'clock positions approximately 1/4"
• Actual length when measured to flare is 15.0"
• Mounting hardware, 2.4oz, for a total of 11oz on a very long 15" rail.

All the advantages and features of Bravo Company's KeyModT Rail, now available in 100% aluminum.

Manufactured from aluminum, it is lightweight yet durable. Also featuring a proprietary patent pending mounting, indexing and lock up system that mitigates 12:00 rail movement under heat generated from the barrel nut.

• Handguard alone weighs oz
• 1.3" Inner Diameter
• 1.5" OUTSIDE flat to flat.
• Handguard flares forward (towards muzzle end) at the 3 and 9 O'clock positions approximately 1/4"
• Actual length when measured to flare is "
• Mounting hardware, oz, for a total of oz on a very long " rail.

All the advantages and features of Bravo Company's KeyModT Rail, now available in 100% aluminum.

Manufactured from aluminum, it is lightweight yet durable. Also featuring a proprietary patent pending mounting, indexing and lock up system that mitigates 12:00 rail movement under heat generated from the barrel nut.

• Handguard alone weighs 4.5 oz
• 1.3" Inner Diameter
• 1.5" OUTSIDE flat to flat.
• Handguard flares forward (towards muzzle end) at the 3 and 9 O'clock positions approximately 1/4"
• Actual length when measured to flare is 7.39"
• Mounting hardware, 2.4oz, for a total of 6.9oz on a 7" rail.

All the advantages and features of Bravo Company's KeyModT Rail, now available in 100% aluminum

Manufactured from aluminum, it is lightweight yet durable. Also featuring a proprietary patent pending mounting, indexing and lock up system that mitigates 12:00 rail movement under heat generated from the barrel nut.

• Handguard alone weighs 4.9 oz
• 1.3" Inner Diameter
• 1.5" OUTSIDE flat to flat.
• Handguard flares forward (towards muzzle end) at the 3 and 9 O'clock positions approximately 1/4"
• Actual length when measured to flare is 8.39"
• Mounting hardware, 2.4oz, for a total of 7.3 oz on a 7" rail.

All the advantages and features of Bravo Company's KeyModT Rail, now available in 100% aluminum

Manufactured from aluminum, it is lightweight yet durable. Also featuring a proprietary patent pending mounting, indexing and lock up system that mitigates 12:00 rail movement under heat generated from the barrel nut.

• Handguard alone weighs 5.6 oz
• 1.3" Inner Diameter
• 1.5" OUTSIDE flat to flat.
• Handguard flares forward (towards muzzle end) at the 3 and 9 O'clock positions approximately 1/4"
• Actual length when measured to flare is 9.4"
• Mounting hardware, 2.4oz, for a total of 8.0oz on a 9" rail.

Made to fit ALL KeyMod mounting surfaces with seven (7) consecutive KeyMod Slots.

• Ultra-slim and radiused surface to allows a "round" handguard feeling, from an Octagonal profile.
• Aggressive Non-Slip or Non-Reflective surface.
• Ventilated for cooling.
• Available in the popular colors of Black, Flat Dark Earth, Wolf Gray and Foliage Green
• Bi-directional. Locking tabs on either end, depending which direction they are installed.
• Measurements: Length 5.550", Width 0.625 ", Thickness 0.100"
• Can be cut to any length, depending on users requirements.
• Made of a high-strength polymer material.
• Each Kit contains Five (5) matching color KeyMod Panel Strips.

Made in the USA.

Made to fit ALL KeyMod mounting surfaces with seven (7) consecutive KeyMod Slots.

• Ultra-slim and radiused surface to allows a "round" handguard feeling, from an Octagonal profile.
• Aggressive Non-Slip or Non-Reflective surface.
• Ventilated for cooling.
• Available in the popular colors of Black, Flat Dark Earth, Wolf Gray and Foliage Green
• Bi-directional. Locking tabs on either end, depending which direction they are installed.
• Measurements: Length 5.550", Width 0.625 ", Thickness 0.100"
• Can be cut to any length, depending on users requirements.
• Made of a high-strength polymer material.
• Each Kit contains Five (5) matching color KeyMod Panel Strips.

Made in the USA.

The BCMGUNFIGHTERT KMSM, KeyModT Quick Detachable Sling Mount.

• Low-Profile for increased mobility and decreased "snag" factor
• Fits standardized KeyModT interface mounting holes
• Fits standard push button, quick detach sling swivel (not included)
• 8-position (360°), non-rotational locking interface
• Requires three KeyModT attachment hole mounting points
• All steel construction

Note: Quick detach sling swivel not included.

BCM US Patent Number 9,377,274

• BCM Low Profile Gas Block for AR15, M16, M4, M4A1.
• Machined of steel, phosphate finish, for .625 barrels.
• Manufactured within very tight Mil-Spec tolerances on all ID's.
• Barrel ID honed after finish per USGI TDP.
• Made by Bravo Company MFG, Inc. with set screw mounting.
• Set Screws are Steel 10-32 x 3/16 Knurled Cup Point

• BCM Low Profile Gas Block for AR15, M16, M4, M4A1. Machined of steel, phosphate finish, for .750 barrels.
• Manufactured within very tight Mil-Spec tolerances on all ID's.
• Barrel ID honed after finish per USGI TDP.
• Made by Bravo Company MFG, Inc. with set screw mounting.
• Set Screws are Steel 10-32 x 3/16 Knurled Cup Point

• Fully ambidextrous mounting; either the left or right side of the rail system.
• Fits majority of popular 1-inch round body tactical light systems.
• Design to mount on the 1:30 or 10:30 o'clock (upper 45° degree) rail positions.
• Strong Aluminum construction.
• Intently designed to below-profile and snag-free.
• Patent Pending anchoring system.
• Minimal added weight, 1 oz.

For your AR15, M16, M4. Carbine receiver extension (buffer tube) machined from 7075T6 and manufactured to Mil-Spec dimensions and specifications. Mil-Spec receiver extensions have a slightly smaller dimension where the stock slides on. Hard Coat Anodized per Mil-A-8625F, Type III, Class 2.

These tubes should be used with stocks such as USGI, BCM, Colt, LMT, SOPMOD, VLTOR, Stag Arms, Magpul CTR (Milspec), and others that a made to the Mil-Spec size.

• Direct replacement handguard featuring simple "drop in" design.
• For mil-spec, M4 type AR15's with a carbine length gas system and mil-spec front sight base.
• Natural ergonomics, slim, comfortable and lightweight, (only 5.6 oz).
• Aggressively textured area for enhanced traction.
• Reinforced KeyMod interface for durable accessory support.
• Three, six-hole KeyMod mounting surfaces (10:30, 1:30, and 6:00).
• Aluminum heat shield reduces heat transfer to the handguard and shooters' hand.
• The PKMR will only fit a round carbine type handguard retaining cap.
• Patent Pending design.

Made in the USA.

• Direct replacement handguard featuring simple "drop in" design.
• For AR15's with a mid length gas system and mil-spec front sight base.
• Natural ergonomics, slim, comfortable and lightweight, (only 7.9 oz).
• Aggressively textured area for enhanced traction.
• Reinforced KeyMod interface for durable accessory support.
• Three, six-hole KeyMod mounting surfaces (10:30, 1:30, and 6:00).
• Aluminum heat shield reduces heat transfer to the handguard and shooters' hand.
• The PKMR will only fit a triangle M16 type handguard retaining cap.
• Patent Pending design.

Made in the USA.

• Direct replacement handguard featuring simple "drop in" design.
• For AR15's with a mid length gas system and mil-spec front sight base.
• Natural ergonomics, slim, comfortable and lightweight, (only 7.9 oz).
• Aggressively textured area for enhanced traction.
• Reinforced KeyMod interface for durable accessory support.
• Three, six-hole KeyMod mounting surfaces (10:30, 1:30, and 6:00).
• Aluminum heat shield reduces heat transfer to the handguard and shooters' hand.
• The PKMR will only fit a triangle M16 type handguard retaining cap.
• Patent Pending design.

Made in the USA.

BCM quality, modern manufacturing processes, and aerospace coatings are combined to ensure parts last a lifetime while performing far beyond requirements established nearly six decades ago.

The BCM PNTT Trigger and PNTT Hammer are a precision machined Mil-Spec AISI8620 investment casting per the USGI TDP (Mil-Spec) for M16/M4 family of weapons. (not to be confused with MIM parts that are very common in the commercial market). 156/157 holes are honed to assist in perfect alignment and a smooth trigger pull. After that, the BCM PNTT Trigger and PNTT Hammer then goes through a 3 step heat treat and case hardening process for optimal grain structure alignment, yielding a stronger and more wear resistance product.

As with all BCM products, Made in the USA.

Featuring the same industry leading barrel nut and lock up design as originally introduced on BCM's evolutionary KMR handguard, the QRF Series of handguards gives the shooter modularity in the picatinny (MIL-STD-1913) platform. Includes T, L, R, and B recoil slot markings on all four rails to aid in repeatable set up for the end user.

This proprietary patented mounting system (US Patent 8904691), includes a mechanical index to the 12:00 rail and positions mounting hardware to mitigate the movement caused by heat generated by the weapon system.

• Free Float Quad Rail eliminates loads from barrel, reducing the deflection for more accurate shooting.
• Precision Machined Aerospace 6061-T6 Aluminum Alloy, for high strength and lightweight.
• Proprietary engineered profile offers additional cross sectional strength.
• Includes 4 QD Sing Swivel Sockets, (limited rotation)
• Steel Barrel Nut (same KMR, MMR, and QRF series), to resist movement under heat.
• Hard Coat Anodized per Mil-A-8625F, Type III, Class 2
• Handguard alone weighs 9.8 oz
• Handguard mounting hardware 2.3 oz
• 1.3" Inside Diameter
• 2.12" Wide

Designed to be used with mid length and carbine gas systems with a low profile gas block.

Note: The barrel nut will fit over all mil-spec diameter barrels (max of 1")

Bravo Company MFG, Inc. US Patent 8904691

Featuring the same industry leading barrel nut and lock up design as originally introduced on BCM's evolutionary KMR handguard, the QRF Series of handguards gives the shooter modularity in the picatinny (MIL-STD-1913) platform. Includes T, L, R, and B recoil slot markings on all four rails to aid in repeatable set up for the end user.

This proprietary patented mounting system (US Patent 8904691), includes a mechanical index to the 12:00 rail and positions mounting hardware to mitigate the movement caused by heat generated by the weapon system.

• Free Float Quad Rail eliminates loads from barrel, reducing the deflection for more accurate shooting.
• Precision Machined Aerospace 6061-T6 Aluminum Alloy, for high strength and lightweight.
• Proprietary engineered profile offers additional cross sectional strength.
• Includes 4 QD Sing Swivel Sockets, (limited rotation)
• Steel Barrel Nut (same KMR, MMR, and QRF series), to resist movement under heat.
• Hard Coat Anodized per Mil-A-8625F, Type III, Class 2
• Handguard alone weighs 11.8 oz
• Handguard mounting hardware 2.3 oz
• 1.3" Inside Diameter
• 2.12" Wide

Designed to be used with Mil-Spec M16 rifle length gas systems with FSB or low profile gas block, or mid length and carbine gas systems with a low profile gas block.

Note: The barrel nut will fit over all mil-spec diameter barrels (max of 1")

Bravo Company MFG, Inc. US Patent 8904691

Featuring the same industry leading barrel nut and lock up design as originally introduced on BCM's evolutionary KMR handguard, the QRF Series of handguards gives the shooter modularity in the picatinny (MIL-STD-1913) platform. Includes T, L, R, and B recoil slot markings on all four rails to aid in repeatable set up for the end user.

This proprietary patented mounting system (US Patent 8904691), includes a mechanical index to the 12:00 rail and positions mounting hardware to mitigate the movement caused by heat generated by the weapon system.

• Free Float Quad Rail eliminates loads from barrel, reducing the deflection for more accurate shooting.
• Precision Machined Aerospace 6061-T6 Aluminum Alloy, for high strength and lightweight.
• Proprietary engineered profile offers additional cross sectional strength.
• Includes 4 QD Sing Swivel Sockets, (limited rotation)
• Steel Barrel Nut (same KMR, MMR, and QRF series), to resist movement under heat.
• Hard Coat Anodized per Mil-A-8625F, Type III, Class 2
• Handguard alone weighs 6.9 oz
• Handguard mounting hardware 2.3 oz
• 1.3" Inside Diameter
• 2.12" Wide

Designed to be used with carbine with FSB or shorter gas systems with a low profile gas block.

Note: The barrel nut will fit over all mil-spec diameter barrels (max of 1")

Bravo Company MFG, Inc. US Patent 8904691

Featuring the same industry leading barrel nut and lock up design as originally introduced on BCM's evolutionary KMR handguard, the QRF Series of handguards gives the shooter modularity in the picatinny (MIL-STD-1913) platform. Includes T, L, R, and B recoil slot markings on all four rails to aid in repeatable set up for the end user.

This proprietary patented mounting system (US Patent 8904691), includes a mechanical index to the 12:00 rail and positions mounting hardware to mitigate the movement caused by heat generated by the weapon system.

• Free Float Quad Rail eliminates loads from barrel, reducing the deflection for more accurate shooting.
• Precision Machined Aerospace 6061-T6 Aluminum Alloy, for high strength and lightweight.
• Proprietary engineered profile offers additional cross sectional strength.
• Includes 4 QD Sing Swivel Sockets, (limited rotation)
• Steel Barrel Nut (same KMR, MMR, and QRF series), to resist movement under heat.
• Hard Coat Anodized per Mil-A-8625F, Type III, Class 2
• Handguard alone weighs 7.5 oz
• Handguard mounting hardware 2.3 oz
• 1.3" Inside Diameter
• 2.12" Wide

Designed to be used with carbine (or shorter) gas systems with a low profile gas block.

Note: The barrel nut will fit over all mil-spec diameter barrels (max of 1")

Bravo Company MFG, Inc. US Patent 8904691

Featuring the same industry leading barrel nut and lock up design as originally introduced on BCM's evolutionary KMR handguard, the QRF Series of handguards gives the shooter modularity in the picatinny (MIL-STD-1913) platform. Includes T, L, R, and B recoil slot markings on all four rails to aid in repeatable set up for the end user.

This proprietary patented mounting system (US Patent 8904691), includes a mechanical index to the 12:00 rail and positions mounting hardware to mitigate the movement caused by heat generated by the weapon system.

• Free Float Quad Rail eliminates loads from barrel, reducing the deflection for more accurate shooting.
• Precision Machined Aerospace 6061-T6 Aluminum Alloy, for high strength and lightweight.
• Proprietary engineered profile offers additional cross sectional strength.
• Includes 4 QD Sing Swivel Sockets, (limited rotation)
• Steel Barrel Nut (same KMR, MMR, and QRF series), to resist movement under heat.
• Hard Coat Anodized per Mil-A-8625F, Type III, Class 2
• Handguard alone weighs 8.8 oz
• Handguard mounting hardware 2.3 oz
• 1.3" Inside Diameter
• 2.12" Wide

Designed to be used with mid length with FSB and carbine gas systems with a low profile gas block.

Note: The barrel nut will fit over all mil-spec diameter barrels (max of 1")

Bravo Company MFG, Inc. US Patent 8904691

• Fully ambidextrous: made to mount flush or cantilever off either the left or right side of the rail system.
• Designed for use with Surefire'sT Scout Light mounting interface.
• Multiple mounting holes for ideal rail placement.
• Designed to mount on the 3 or 9 o'clock rail positions.
• Durable Aluminum construction. Intently designed to be low-profile and snag-free.
• Patent Pending mounting system.
• Minimal added weight, 0.5 oz.
• BCM US Patent Number 9,377,274

Based on the SOPMOD designed bolt upgrade and rebuild package, this kit is designed to breathe new life into your bolt assembly. The bolt assembly is the heart of your AR15 rifle system and preventative maintenance used by professions insures these systems keep running even under the harshest of conditions.

This is a great spare parts kit to keep your AR15, M16, M4 running in the field.

Kit Includes:

• Extractor made to USGI specs (shot peened)
• Extractor pin
• BCM Extractor Spring (chrome silicon, heat treated & stress relieved, shot peened)
• 3 USGI Gas Rings
• Crane Ind O-Ring (Mil-Spec)
• Black Extractor Insert