Bravo Company USA, Inc.

This kit contains all the necessary parts to mount your Mil-Spec dimension stock assembly to your lower receiver.

Receiver Extension - Mil-Spec, 6 position (machined from 7075T6)
Receiver End Plate
Lock Nut (Castle) M4
Action Spring, Carbine Buffer Assembly, Carbine Std (options for H, H2)

This kit is compatible with the plastic stocks from; BCM, VLTOR, LMT, Magpul CTR-M, Stag Arms, Colt

The Patent Pending BCM® Direct Mount Picatinny 1913 interface system, was developed to be the most rigid, light-weight, and cost effective system available for Vertical Pistol Grips and Hand Stop type accessories. Most of the industry relies on a simple screw and backing nut for a mounting system. BCM® has developed a patent pending anchor system that not only secures to the mounting surface, but spreads the energy and force throughout the accessory.

Conventional mounting systems can allow for an increased amount of shifting and flexing of the accessory. The BCM® direct mount interface system reduces those issues and offers a more secure lockup, eliminating play in the mounting surface.

• Low-profile length for increased mobility and decreased "snag" factor.
• The forward angle increases the rigidity of the forearm, while providing a more natural wrist angle.
• Can be mounted in reverse angle to increase control when grabbing handguard and grip.
• Flat sides with aggressive texture give better yaw control to the shooter during firing and non-firing manipulations.
• Anchor and bolt system offers a simple robust design, while maintaining a lightweight 1.9 ounces.
• Manufactured from high quality, impact resistant polymers.

Made in the USA

The Patent Pending BCM® Direct Mount Picatinny 1913 interface system, was developed to be the most rigid, light-weight, and cost effective system available for Vertical Pistol Grips and Hand Stop type accessories. Most of the industry relies on a simple screw and backing nut for a mounting system. BCM® has developed a patent pending anchor system that not only secures to the mounting surface, but spreads the energy and force throughout the accessory.

Conventional mounting systems can allow for an increased amount of shifting and flexing of the accessory. The BCM® direct mount interface system reduces those issues and offers a more secure lockup, eliminating play in the mounting surface.

• Low-profile length for increased mobility and decreased "snag" factor.
• The forward angle increases the rigidity of the forearm, while providing a more natural wrist angle.
• Can be mounted in reverse angle to increase control when grabbing handguard and grip.
• Flat sides with aggressive texture give better yaw control to the shooter during firing and non-firing manipulations.
• Anchor and bolt system offers a simple robust design, while maintaining a lightweight 1.9 ounces.
• Manufactured from high quality, impact resistant polymers.

Made in the USA

• Low-profile length for increased mobility and decreased "snag" factor.
• The forward angle increases the rigidity of the forearm, while providing a more natural wrist angle.
• Can be mounted in reverse angle to increase control when grabbing handguard and grip.
• Flat sides with aggressive texture give better yaw control to the shooter during firing and non-firing manipulations.
• Anchor and bolt system offers a simple robust design, while maintaining a lightweight 1.9 ounces.
• Manufactured from high quality, impact resistant polymers.

Made in USA

• Low-profile length for increased mobility and decreased "snag" factor.
• The forward angle increases the rigidity of the forearm, while providing a more natural wrist angle.
• Can be mounted in reverse angle to increase control when grabbing handguard and grip.
• Flat sides with aggressive texture give better yaw control to the shooter during firing and non-firing manipulations.
• Anchor and bolt system offers a simple robust design, while maintaining a lightweight 1.9 ounces.
• Manufactured from high quality, impact resistant polymers.

Made in USA

• Low-profile length for increased mobility and decreased "snag" factor.
• The forward angle increases the rigidity of the forearm, while providing a more natural wrist angle.
• Can be mounted in reverse angle to increase control when grabbing handguard and grip
• Flat sides give better yaw control to the shooter during firing and non-firing manipulations.
• Aggressive texture and storage volume combined with modular design to allow improvements and adaptation in the future.
• Cross bolt designed to work with improvised tools (such as a quarter) and allow for easy adjustment or re-tightening.
• Reversible clamps allow user to set up fasteners to reside on either side.
• Spring-loaded clamps makes installation and removal easier.
• Manufactured from high quality, impact resistant polymers.

Made in the USA

Note: Test fit to ensure proper function (may display attributes consistent with this QC process).

• Low-profile length for increased mobility and decreased "snag" factor.
• The forward angle increases the rigidity of the forearm, while providing a more natural wrist angle.
• Can be mounted in reverse angle to increase control when grabbing handguard and grip
• Flat sides give better yaw control to the shooter during firing and non-firing manipulations.
• Aggressive texture and storage volume combined with modular design to allow improvements and adaptation in the future.
• Cross bolt designed to work with improvised tools (such as a quarter) and allow for easy adjustment or re-tightening.
• Reversible clamps allow user to set up fasteners to reside on either side.
• Spring-loaded clamps makes installation and removal easier.
• Manufactured from high quality, impact resistant polymers.

Made in the USA

Note: Test fit to ensure proper function (may display attributes consistent with this QC process).

• Quick detachable, Tool-less, Direct Mount KeyModT interface.
• Low-profile length for increased mobility and decreased "snag" factor.
• The forward angle increases the rigidity of the forearm, while providing a more natural wrist angle.
• Can be mounted in reverse angle to increase control when grabbing handguard and grip.
• Flat sides give better yaw control during firing and non-firing manipulations.
• Aggressive texture.
• Storage inside the grip.
• Requires three KeyModT attachment hole mounting points.
• Spring-loaded clamps makes installation and removal easier.
• Available colors: Black, Flat Dark Earth, Foliage Green, Wolf Gray.
• Manufactured from high quality, impact resistant polymers.
• BCM US Patent Number 9,383,163

Made in the USA

• Quick detachable, Tool-less, Direct Mount KeyModT interface.
• Low-profile length for increased mobility and decreased "snag" factor.
• The forward angle increases the rigidity of the forearm, while providing a more natural wrist angle.
• Can be mounted in reverse angle to increase control when grabbing handguard and grip.
• Flat sides give better yaw control during firing and non-firing manipulations.
• Aggressive texture.
• Storage inside the grip.
• Requires three KeyModT attachment hole mounting points.
• Spring-loaded clamps makes installation and removal easier.
• Available colors: Black, Flat Dark Earth, Foliage Green, Wolf Gray.
• Manufactured from high quality, impact resistant polymers.
• BCM US Patent Number 9,383,163

Made in the USA

• Precision machined to correct Mil-Specs from 7075 T6 Forgings extension, providing the user with superior strength when dropped or when mortaring malfunction clearance drills.
• Fully Assembled with forward assist, and ejection port cover
• Mil-Std 1913 Rail for mounting optics and accessories
• Machined for use with barrels that use an M4 barrel extension
• Laser etched T-markings for addressing the remounting of optics
• Includes Mil-Spec Forward Assist with heat treated tool steel pawl, with press fit and pinned cap
• Hard Coat Anodized per Mil-A-8625F, Type III, Class2
• Dry Film Lube on interior bore per Mil-Specs
• As with all BCM® products

Made in the USA.

Built to the correct Mil-Specs
(Inside Diameter for barrel extension slightly undersized for a tighter fit to the barrel and a more accurate rifle. Please use a heat gun or hair dryer to warm up threaded bore of receiver if barrel extension is too tight).

SPECIFICATIONS:

Part Number:
LRG-SBA3-BLK
Caliber: MULTI
Model:
BCM4
Fire Control:
PNT Semi Auto
Rear Sling Mounts:
QTY 1
Receiver Extension:
7075 T6
Buffer Type:
Carbine H
Pistol Grip:
BCM Mod 3
Trigger Guard:
BCM Enhanced
Approximate Weight:
1lb 12oz

SPECIFICATIONS:

Part Number:
LRG-STK-MOD-0
Caliber: MULTI
Model:
BCM4
Stock:
BCM Mod 0
Fire Control:
PNT Semi Auto
Rear Sling Mounts:
QTY 3
Receiver Extension:
7075 T6
Buffer Type:
Carbine H
Pistol Grip:
BCM Mod 3
Trigger Guard:
BCM Enhanced
Approximate Weight:
2.2 lbs

• Machined from Aluminum Forgings 7075-T6
• Hardcoat Anodizing: MIL-A-8625F, Type III, Class 2
• BCM Milspec 7075-T6 Receiver Extention
• BCM Gunfighter Stock Mod 0
• Staked M4 Lock Nut
• USGI H Buffer (1 USGI Tungsten, 2 Steel)
• BCM Gunfighter Trigger Guard
• BCM Gunfighter's Grip, Mod 1 - Black
• Fire Controls marked SAFE and SEMI
  

SPECIFICATIONS:

Part Number:
LRG-STK-MOD-0
Caliber: MULTI
Model:
BCM4
Stock:
BCM Mod 0
Fire Control:
PNT Semi Auto
Rear Sling Mounts:
QTY 3
Receiver Extension:
7075 T6
Buffer Type:
Carbine H
Pistol Grip:
BCM Mod 3
Trigger Guard:
BCM Enhanced
Approximate Weight:
2.2 lbs

SPECIFICATIONS:

Part Number:
LRG-STK-MOD-0
Caliber: MULTI
Model:
BCM4
Stock:
BCM Mod 0
Fire Control:
PNT Semi Auto
Rear Sling Mounts:
QTY 3
Receiver Extension:
7075 T6
Buffer Type:
Carbine H
Pistol Grip:
BCM Mod 3
Trigger Guard:
BCM Enhanced
Approximate Weight:
2.2 lbs

SPECIFICATIONS:

Part Number:
LRG-STK-MOD-0
Caliber: MULTI
Model:
BCM4
Stock:
BCM Mod 0
Fire Control:
PNT Semi Auto
Rear Sling Mounts:
QTY 3
Receiver Extension:
7075 T6
Buffer Type:
Carbine H
Pistol Grip:
BCM Mod 3
Trigger Guard:
BCM Enhanced
Approximate Weight:
2.2 lbs

SPECIFICATIONS:

Part Number:
LRG-STK-MOD-0
Caliber: MULTI
Model:
BCM4
Stock:
BCM Mod 0
Fire Control:
PNT Semi Auto
Rear Sling Mounts:
QTY 3
Receiver Extension:
7075 T6
Buffer Type:
Carbine H
Pistol Grip:
BCM Mod 3
Trigger Guard:
BCM Enhanced
Approximate Weight:
2.2 lbs

SPECIFICATIONS:

Part Number:
LRG-STK-MOD-0
Caliber: MULTI
Model:
BCM4
Stock:
BCM Mod 0
Fire Control:
PNT Semi Auto
Rear Sling Mounts:
QTY 3
Receiver Extension:
7075 T6
Buffer Type:
Carbine H
Pistol Grip:
BCM Mod 3
Trigger Guard:
BCM Enhanced
Approximate Weight:
2.2 lbs

SPECIFICATIONS:

Part Number:
LRG-STK-MOD-0
Caliber: MULTI
Model:
BCM4
Stock:
BCM Mod 0
Fire Control:
PNT Semi Auto
Rear Sling Mounts:
QTY 3
Receiver Extension:
7075 T6
Buffer Type:
Carbine H
Pistol Grip:
BCM Mod 3
Trigger Guard:
BCM Enhanced
Approximate Weight:
2.2 lbs