GG&G

GG&G
View as List Grid

Items 1-50 of 348

Page
per page
Set Descending Direction
In Stock
  1. GG-1347-S : Mossberg 930 Front Sling Attachment - Small Diameter

    The Mossberg 930 semi-auto shotgun has a strong following and many 930 shooters have asked us to "get with it" and manufacture a front sling attachment and a rear attachment (installed right behind the receiver) for this formidable shotgun. We are proud to announce that we "got with it" and are now offering ambidextrous front and rear sling mounts for the Mossberg 930 shotgun.

    FRONT SLING ATTACHMENT SPECIFICATIONS:

    • Compact & easy to install
    • The Mossberg 930 Front Sling Attachment solidly mounts behind the end cap of the magazine tube.
    • A ball bearing detent on the Front Sling Attachment has a built in floating hardened steel ball that aides in keeping the extended magazine tube from backing off under recoil.
    • Ambidextrous.
    • The 930 Front Sling Attachment provides the preferred front side sling mounting position for 1 1/4" slings.
    • All edges have been de-horned and rounded for the shooters safety.
    • Material: Manufactured from tough AS-35 Geneva steel.
    • Finish: Bead blasted and manganese phosphate finished in non-reflective matte black per Mil-Spec.
    • Weight: 2oz.

    REAR SLING ATTACHMENT SPECIFICATIONS:

    • Compact & easy to install.
    • The Mossberg 930 Rear Sling Attachment mounts just behind the receiver.
    • The 930 Rear Sling Attachment provides the preferred rear side sling mounting position for 1 1/4" slings.
    • The Mossberg 930 Rear Sling Attachment can be used with a two point sling set up or as a single point sling attachment.
    • Ambidextrous.
    • All edges have been de-horned and rounded for the shooters safety.
    • Material: Manufactured from solid billet 7075-T6 aluminum.
    • Finish: Bead blasted and Type III Hard coat anodized ina non-reflective matte black per Mil-Spec.
    • Weight: 2 oz.
    Learn More
  2. GGG-1001 : Scout Rail

    STANDARD AND SCOUT LENGTH SCOPE RAILS

    These two GG&G optical mounting rails were designed to mount easily over the integral rails of the AR15/M16 flat top receiver and work in conjunction with any of our back up iron sights. As these rail mounting brackets raise the line of sight by 1/2 inch, they offer a proper cheek weld when optical devices are attached. In addition, they serve to protect the flat top receiver's integral rails from the damaging wear associated with lever type quick-release mounts, especially those without buffer pads.

    The GG&G Scout Rail extends two inches beyond the upper receiver and cantilevers over the handuards including the M4 forearm. It was developed to accommodate long-eye-relief "scout"-type scopes and also Aimpoint red dot sights with night vision monoculars mounted to their rear.

    Each scope mount rail is manufactured from billet 6061 T6 aluminum alloy, black Type III hard-coat anodized per Mil-Spec, and meet MIL-STD-1913. These rail mounting systems lock onto the flat top receiver by means of a full locking side bar and two round head socket head screws. This provides both a positive and perfectly aligned lock-up even on well-worn receiver rails. The socket head wrench required for installation is included.
    Both the Standard and Scout length mounting rails are manufactured in the USA at our Tucson, Arizona factory. Because these AR-15 and M-4 rail mounting systems are used in combat situations, they are designed and tested extensively before they are sold.

    Learn More
  3. GGG-1002 : Standard Rail

    STANDARD AND SCOUT LENGTH SCOPE RAILS

    These two GG&G optical mounting rails were designed to mount easily over the integral rails of the AR15/M16 flat top receiver and work in conjunction with any of our back up iron sights. As these rail mounting brackets raise the line of sight by 1/2 inch, they offer a proper cheek weld when optical devices are attached. In addition, they serve to protect the flat top receiver's integral rails from the damaging wear associated with lever type quick-release mounts, especially those without buffer pads.

    The GG&G Scout Rail extends two inches beyond the upper receiver and cantilevers over the handuards including the M4 forearm. It was developed to accommodate long-eye-relief "scout"-type scopes and also Aimpoint red dot sights with night vision monoculars mounted to their rear.

    Each scope mount rail is manufactured from billet 6061 T6 aluminum alloy, black Type III hard-coat anodized per Mil-Spec, and meet MIL-STD-1913. These rail mounting systems lock onto the flat top receiver by means of a full locking side bar and two round head socket head screws. This provides both a positive and perfectly aligned lock-up even on well-worn receiver rails. The socket head wrench required for installation is included.
    Both the Standard and Scout length mounting rails are manufactured in the USA at our Tucson, Arizona factory. Because these AR-15 and M-4 rail mounting systems are used in combat situations, they are designed and tested extensively before they are sold.

    Learn More
  4. GGG-1005 : A2 Back Up Iron Sight With Locking Detent

    The GG&G A2 AR-15 Back Up Sight is our number one selling Back Up Iron Sight (BUIS). It provides the operator with an easy to install and easy to operate flip up rear sight, and includes the all-important locking detent. Besides providing a low profile "ready to go" BUIS when you need it, it features include a tactile ergonomic windage knob and counter sunk crossbolt to eliminate the possibility of snags, incorporated in a streamlined body. The A2 Back Up Iron Sight is always at the tactical ready once placed in the up position. This is the same back up iron sight used by elite armed forces and law enforcement teams worldwide.

    • The A2 BUIS is easy to install.
    • Solid squeeze rail attachment mechanism with counter sunk crossbolt to eliminate snags.
    • Can be used as a co-witness iron sight with most red dot sighting systems, as a stand-alone sight or in conjunction with GG&G interface rails.
    • The A2 Back Up Rear Sight features the standard military A2-style double peep aperture allowing for end user known point of impact.
    • This A2 features full windage adjustment with the tactile windage knob.
    • The A2 BUIS presents a low profile when in the down position, allowing clearance for most optics.
    • When deployed in the up position, the sight cannot be folded down without depressing the spring assisted detent release button located on the left side of the base, eliminating the possibility of accidentally lowering the sight.
    • The initial zero is set by adjusting the weapons front sight post.
    • The A2 Back Up Iron Sight is compatible with all GG&G Flip Up Front Sights.
    • The GG&G A2 BUIS ordering options include requesting the XS same plane aperture as a substitute for the standard A2 aperture, or a Trijicon Green Tritium aperture. Both are factory installed for you.
    • All edges have been deburred and softened to protect the shooter.
    • Materials: The sight body and sight stem are manufactured from billet 6061-T6 aluminum.
    • Finish: All aluminum parts are Type III hard coat anodized in a non-reflective black mil-spec finish to provide combat durability.
    • Weight:1.8 oz.
    Learn More
  5. GGG-1005SA : Spring Actuated A2 BUIS

    The GG&G A2 Spring Actuated BUIS (back Up Iron Sight) is the latest evolution in our BUIS product line. Many military and law enforcement operators have requested that we manufacture an A2 BUIS that deploys with just a push of the button. The unique and proprietary design of this mechanism allows the actuator spring and mechanical components to be captivated and not exposed to environmental elements.

    • Easily installs onto Mil-Std-1913 Dovetail rail.
    • The sight presents a low profile when in the down position, allowing clearance for most optics.
    • Solid squeeze rail attachment mechanism with counter sunk crossbolt to eliminate snags.
    • The Spring Actuated A2 Black Up Iron Sight quickly springs into an on target position with just the push of the actuator button, locking solidly into the upright position. Another push of the button and the lock is released allowing the sight to be placed in the down position.
    • The SA A2 Black Up Iron Sight cannot be folded down without depressing the actuator button located on the left side of the sight base, eliminating the possibility of accidentally lowering the sight.
    • Can be used as a stand-alone sight, in conjunction with GG&G Interface Rails, or as a True Center co-witness iron sight with most red dot optics.
    • The A2 Back Up Rear Sight features the standard military A2-style double peep aperture allowing for end user known point of impact.
    • The sight has full windage adjustment with a tactile windage knob and windage screw.
    • Windage knob click provides approximately 0.48 MOA change when mounted on the 20" AR-15 rifle and about 0.65 MOA on the 14.5" M4 carbine.
    • Initial elevation zero on the sight is set by adjusting the weapons front sight post.
    • Height in the upright position is 1.400" and in the fold down position is .720".
    • The A2 Spring Actuated Back Up Iron Sight is compatible with all GG&G Flip Up Front Sights.
    • Ordering options include requesting the XS same plane aperture as a substitute for the standard A2 aperture, or a Trijicon Green Tritium aperture. Both are factory installed for you.
    • All edges have been deburred and softened to protect the shooter.
    • Material: The sight body and sight stem are manufactured from billet 6061 T6-aluminum.
    • Finish: All aluminum parts are Type III hard coat anodized in a non-reflective black mil-spec finish to provide combat durability.
    • Weight: 1.8 oz.
    Learn More
  6. GGG-1005SAT : Spring Actuated A2 BUIS With Trijicon Tritium A2 Aperture

    The GG&G A2 Spring Actuated BUIS (back Up Iron Sight) is the latest evolution in our BUIS product line. Many military and law enforcement operators have requested that we manufacture an A2 BUIS that deploys with just a push of the button. The unique and proprietary design of this mechanism allows the actuator spring and mechanical components to be captivated and not exposed to environmental elements.

    • Easily installs onto Mil-Std-1913 Dovetail rail.
    • The sight presents a low profile when in the down position, allowing clearance for most optics.
    • Solid squeeze rail attachment mechanism with counter sunk crossbolt to eliminate snags.
    • The Spring Actuated A2 Black Up Iron Sight quickly springs into an on target position with just the push of the actuator button, locking solidly into the upright position. Another push of the button and the lock is released allowing the sight to be placed in the down position.
    • The SA A2 Black Up Iron Sight cannot be folded down without depressing the actuator button located on the left side of the sight base, eliminating the possibility of accidentally lowering the sight.
    • Can be used as a stand-alone sight, in conjunction with GG&G Interface Rails, or as a True Center co-witness iron sight with most red dot optics.
    • The A2 Back Up Rear Sight features the standard military A2-style double peep aperture allowing for end user known point of impact.
    • The sight has full windage adjustment with a tactile windage knob and windage screw.
    • Windage knob click provides approximately 0.48 MOA change when mounted on the 20" AR-15 rifle and about 0.65 MOA on the 14.5" M4 carbine.
    • Initial elevation zero on the sight is set by adjusting the weapons front sight post.
    • Height in the upright position is 1.400" and in the fold down position is .720".
    • The A2 Spring Actuated Back Up Iron Sight is compatible with all GG&G Flip Up Front Sights.
    • Ordering options include requesting the XS same plane aperture as a substitute for the standard A2 aperture, or a Trijicon Green Tritium aperture. Both are factory installed for you.
    • All edges have been deburred and softened to protect the shooter.
    • Material: The sight body and sight stem are manufactured from billet 6061 T6-aluminum.
    • Finish: All aluminum parts are Type III hard coat anodized in a non-reflective black mil-spec finish to provide combat durability.
    • Weight: 1.8 oz.
    Learn More
  7. GGG-1005T : A2 Back Up Iron Sight With Locking Detent And Trijicon Tritium A2 Aperture

    The GG&G A2 AR-15 Back Up Sight is our number one selling Back Up Iron Sight (BUIS). It provides the operator with an easy to install and easy to operate flip up rear sight, and includes the all-important locking detent. Besides providing a low profile "ready to go" BUIS when you need it, it features include a tactile ergonomic windage knob and counter sunk crossbolt to eliminate the possibility of snags, incorporated in a streamlined body. The A2 Back Up Iron Sight is always at the tactical ready once placed in the up position. This is the same back up iron sight used by elite armed forces and law enforcement teams worldwide.

    • The A2 BUIS is easy to install.
    • Solid squeeze rail attachment mechanism with counter sunk crossbolt to eliminate snags.
    • Can be used as a co-witness iron sight with most red dot sighting systems, as a stand-alone sight or in conjunction with GG&G interface rails.
    • The A2 Back Up Rear Sight features the standard military A2-style double peep aperture allowing for end user known point of impact.
    • This A2 features full windage adjustment with the tactile windage knob.
    • The A2 BUIS presents a low profile when in the down position, allowing clearance for most optics.
    • When deployed in the up position, the sight cannot be folded down without depressing the spring assisted detent release button located on the left side of the base, eliminating the possibility of accidentally lowering the sight.
    • The initial zero is set by adjusting the weapons front sight post.
    • The A2 Back Up Iron Sight is compatible with all GG&G Flip Up Front Sights.
    • The GG&G A2 BUIS ordering options include requesting the XS same plane aperture as a substitute for the standard A2 aperture, or a Trijicon Green Tritium aperture. Both are factory installed for you.
    • All edges have been deburred and softened to protect the shooter.
    • Materials: The sight body and sight stem are manufactured from billet 6061-T6 aluminum.
    • Finish: All aluminum parts are Type III hard coat anodized in a non-reflective black mil-spec finish to provide combat durability.
    • Weight:1.8 oz.
    Learn More
  8. GGG-1006 : MAD Flip Up Rear Sight With Locking Detent

    The GG&G MAD (Multiple Aperture Device) BUIS (Back Up Iron Sight)) was originally developed to fulfill a request from Naval Surface Warfare for a battle-ready, low profile back up iron sight system that provided both a large and small aperture on the same plane, as well as providing a co-witness capability with the majority of red dot optics. The MAD is the lowest profile locking detent BUIS offered, and is used by elite armed forces and law enforcement teams worldwide. For Federal Law Enforcement and Military orders, the NSN number is NSN 1005-01-527-6333

    • The GG&G MAD BUIS is easily installed.
    • Solid squeeze rail attachment mechanism with counter sunk crossbolt to eliminate snags.
    • The Multiple Aperture Device can be used as a co-witness iron sight with most red dot sighting systems, as a stand-alone sight or in conjunction with GG&G Interface Rails.
    • The Sight is compatible with all GG&G Flip Up Front Sights.
    • The MAD BUIS presents an extremely low profile when in the down position, allowing clearance for almost all optics.
    • The sight stem locks in the up position with a positive mechanical detent system. In the up position, the sight cannot be folded down without depressing the spring assisted detent release button located on the left side of the sight base, eliminating the possibility of accidentally lowering the sight
    • The MAD has four apertures; two of each size. (Rotating the aperture disc in either direction will bring the next size into view.)
    • All apertures are on the same plane and thus zeroed to the same point of impact.
    • The aperture disc is knurled for easier manipulation in combat environments.
    • The MAD overhangs the rear of the receiver by 0.200-inch providing a lip, allowing the sight to be easily deployed even with a gloved hand.
    • Small aperture diameter is 0.073-inch and large aperture in 0.199-inch in diameter.
    • A tactile windage knob is used, with one click of the windage knob providing approximately 0.48 MOA change when mounted on the M16A2E4 rifle and about 0.65 MOA when mounted on the M4 carbine.
    • The initial zero is set by adjusting the weapons front sight post.
    • GG&G MAD BUIS ordering options include adding Trijicon Green Tritium night sight inserts that are factory installed.
    • The MAD BUIS is compatible with Armalite AR-10 and DPMS LR series rifles.
    • All hard edges have been softened and deburred and softened for the shooters safety.
    • Material: The mount body is CNC manufactured from billet 6061 T6-aluminum alloy.
    • Finish: All aluminum parts are Type III hard coat anodized in a non-reflective black mil-spec finish to provide combat durability.
    • Finish: All steel components are manganese phosphated in a non-reflective black finish per mil-spec.
    • Weight: Just over 2 oz.
    Learn More
  9. GGG-1006RA : MAD Flip Up Rear Sight With Ranging Aperture And Locking Detent

    The GG&G MAD BUIS With Ranging Aperture was originally manufactured under contract with Picatinny Arsenal. Although the MAD BUIS is ammunition and weapon specific, shooters using 55 or 62 grain ammunition with a 16" barrel will find it very accurate.

    • The GG&G MAD Ranging BUIS is easily installed.
    • Solid squeeze rail attachment mechanism with solid crossbolt.
    • The Ranging Multiple Aperture Device can be used as a co-witness iron sight with most red dot sighting systems, as a stand-alone sight or in conjunction with GG&G Interface Rails.
    • The Sight is compatible with all GG&G Flip Up Front Sights.
    • The MAD Ranging BUIS presents an extremely low profile when in the down position, allowing clearance for almost all optics.
    • The sight stem locks in the up position with a positive mechanical detent system. When in the up position, the sight cannot be folded down without depressing the spring assisted detent release button located on the left side of the sight base, eliminating the possibility of accidentally lowering the sight.
    • The Ranging Apertures are preset to the ranges indicated below using ballistic calculations for 55 grain through 62 grain ammunition when used in the AR-15/M16 16" rifle/carbine length weapon.
      The unique rotating multiple aperture disc has five apertures preset to specific distances, specifically, 0=25 & 200 yards, 3=300 yards, 4=400 yards, 5=500 yards, and 6=600 yards.
      The 25 and 200 yd apertures are .158" diameter, all others are .069" diameter.
    • A range indicating window facing the shooter, provides a numerical cue for the shooter.
    • The aperture disc is knurled for easier manipulation in combat environments.
    • The Ranging MAD overhangs the rear of the receiver by 0.200-inch providing a lip, allowing the sight to be easily deployed even with a gloved hand.
    • A tactile windage knob is used, with one click of the windage knob providing approximately 0.48 MOA change when mounted on the M16A2E4 rifle and about 0.65 MOA when mounted on the M4 carbine.
    • The initial zero is set by adjusting the weapons front sight post.
    • All hard edges have been deburred and softened for the shooters safety.
    • Material: The mount body is CNC manufactured from billet 6061-T6 aluminum alloy.
    • Finish: All aluminum parts are Type III hard coat anodized in a non-reflective black mil-spec finish to provide combat durability.
    • Finish: All steel components are black manganese phosphated per mil-spec.
    • Weight: 2.15 oz.
    Learn More
  10. GGG-1009 : Sling Thing Front

    It's generally accepted that tactical slings should be mounted on the side of the weapon. GG&G manufactures Front And Rear "Sling Thing" Sling Attachments that provide standard 1 1/4 inch sling swivels in this preferred sling mounting position.

    • A lightweight and versatile way of attaching a sling to an AR-15/M16 front sight.
    • Ambidextrous.
    • Robust and rigid.
    • Easily installs onto the AR15/M16's "A-frame" front sight assembly.
    • Held in place by counter pressure steel socket head cap screws.
    • MIL-STD-1913 rail can be purchased separately and can substitute for the non-sling swivel side.
    • Manufactured using a Mil-Spec, rubber coated 1 ¼" sling swivel.
    • All edges have been rounded and softened to protect the shooter.
    • Material: 6061-T6 solid aluminum alloy.
    • Finish: Type III hard coat anodized in a non-reflective matte black finish per Mil-Spec.
    • Weight: 1.1 oz.
    • Warranty: Lifetime.
    • Made In America By Men And Women Proud To Be Americans!
    Learn More
  11. GGG-1010 : Sling Thing Rear

    It's generally accepted that tactical slings should be mounted on the side of the weapon. GG&G manufactures Front And Rear "Sling Thing" Sling Attachments that provide standard 1 1/4 inch sling swivels in this preferred sling mounting position.

    • Lightweight and versatile way of attaching to an AR-15/M16 collapsible stock.
    • Ambidextrous.
    • Mounts solid Robust and rigid.
    • Held in place by counter pressure steel socket head cap screws.
    • Manufactured using a Mil-Spec, rubber coated 1 ¼" sling swivel.
    • All edges have been rounded and softened to protect the shooter.
    • Material: 6061-T6 solid aluminum alloy.
    • Finish: Type III hard coat anodized in a non-reflective matte black finish per Mil-Spec.
    • Weight: 1.7 oz.
    • Warranty: Lifetime
    • Made In America By Men And Women Proud To Be Americans!
    Learn More
  12. GGG-1011HD : QD Sling Thing Front w/ Heavy Duty QD Sling Swivel

    It's now generally accepted that tactical slings should be mounted on the side of the weapon. As more and more operators require a QD Sling Swivel, GG&G started manufacturing an AR15 QD Sling Adapter that provides this mounting position to fill that specific mission requirement.

    Our Front And Rear Quick detach Sling Things are a lightweight, durable, easy-to-install and inexpensive sling mounts. Our QD Front Sling Thing installs easily onto the AR15/M16's "A-frame" front sight assembly, on either the right or left sides using socket head cap screws. Mounted high in this manner "rifle roll" is completely prevented.

    The Quick Detach Rear Sling Thing is designed for easy attachment to the AR15/M16 collapsible stock in the same manner. Both come with Heavy Duty QD Sling Swivels. The Heavy Duty QD Sling Swivel provides additional benefits like a larger quick detach button for an easier and quicker transition and a thicker wire diameter to provide a more robust sling attachment surface. Our QD sling swivels are bead blasted and manganese phosphated in a non-reflective matte black mil-spec finish.

    Manufactured from tough 6061 T6 billet aluminum alloy, the body of all of the Sling Things are Type III hard-coat anodized in a matte black combat finish. Our Quick Detach Sling Things are compatible with the Surefire Millenium 500 flashlight forearm.

    All of GG&G's sling mounts and sling adapters for the AR15 and M16 are made in the USA at our Tucson Arizona factory to the specifications of military and police forces who use them in the field.

    Learn More
  13. GGG-1012HD : QD Sling Thing Rear w/ Heavy Duty QD Sling Swivel

    It's now generally accepted that tactical slings should be mounted on the side of the weapon. As more and more operators require a QD Sling Swivel, GG&G started manufacturing an AR15 QD Sling Adapter that provides this mounting position to fill that specific mission requirement.

    Our Front And Rear Quick detach Sling Things are a lightweight, durable, easy-to-install and inexpensive sling mounts. Our QD Front Sling Thing installs easily onto the AR15/M16's "A-frame" front sight assembly, on either the right or left sides using socket head cap screws. Mounted high in this manner "rifle roll" is completely prevented.

    The Quick Detach Rear Sling Thing is designed for easy attachment to the AR15/M16 collapsible stock in the same manner. Both come with Heavy Duty QD Sling Swivels. The Heavy Duty QD Sling Swivel provides additional benefits like a larger quick detach button for an easier and quicker transition and a thicker wire diameter to provide a more robust sling attachment surface. Our QD sling swivels are bead blasted and manganese phosphated in a non-reflective matte black mil-spec finish.

    Manufactured from tough 6061 T6 billet aluminum alloy, the body of all of the Sling Things are Type III hard-coat anodized in a matte black combat finish. Our Quick Detach Sling Things are compatible with the Surefire Millenium 500 flashlight forearm.

    All of GG&G's sling mounts and sling adapters for the AR15 and M16 are made in the USA at our Tucson Arizona factory to the specifications of military and police forces who use them in the field.

    Learn More
  14. GGG-1016 : QD Multi-Flex High Mount, QD High Night Vision Mount for ITT 6015/PVS14

    The PVS-14 Quick Detach Multi-Flex Night Vision Mount for the ITT PVS-14 or Exelis PVS-14 series of night vision monoculars, is designed to go rapidly and easily from a head/helmet mount or hand surveillance mode to a weapon mount. Once the ergonomically designed base is installed on the weapon and the adapter ring is installed to the PVS-14, just the rotation of the grooved locking lever will rigidly lock the PVS-14 into place. Just as quickly, it can be removed and used to meet a tactical situation. Our unique QD PVS-14 adapter ring remains attached to the night vision monocular at all times and interfaces with the weapon's mount in mere seconds.

    • A quick and fast quick detach lever allows fast mounting or dismounting of optic to weapon.
    • Designed to go rapidly and easily from head, helmet or hand held to weapons mounted.
    • The Multi-Flex Base allows optical alignment with most EOTech and Aimpoint scopes when mounting a PVS-14 behind these optics.
    • There is enough clearance for the GG&G A2 and MAD BUIS to mount under the Multi-Flex Base and be operational when the NVG is removed.
    • The unique QD ring remains attached to the night vision device at all times to interface with the weapon's mount in mere seconds.
    • Easy to manipulate QD lever with a large grooved finger pad.
    • Removal of mounting ring is not required to mount the night vision directly to a helmet or head mount.
    • Mounts directly to Mil-Spec flattop upper receiver.
    • Fully compatible with MIL-STD-1913 rails.
    • Material-Aluminum Parts: Aerospace 6061-T6 aluminum alloy.
    • Material-Steel Components: Manufactured from ordnance steel.
    • Finish-Aluminum Parts: Type III hard coat anodized to a matte black finish per mil-spec.
    • Finish-Steel Components: Manganese phosphated matte black per mil-spec.
    • Weight: 3.4 oz.
    Learn More
  15. GGG-1016-B : QD Multi-Flex High Base

    The PVS-14 Quick Detach Multi-Flex Night Vision Mount for the ITT PVS-14 or Exelis PVS-14 series of night vision monoculars, is designed to go rapidly and easily from a head/helmet mount or hand surveillance mode to a weapon mount. Once the ergonomically designed base is installed on the weapon and the adapter ring is installed to the PVS-14, just the rotation of the grooved locking lever will rigidly lock the PVS-14 into place. Just as quickly, it can be removed and used to meet a tactical situation. Our unique QD PVS-14 adapter ring remains attached to the night vision monocular at all times and interfaces with the weapon's mount in mere seconds.

    • A quick and fast quick detach lever allows fast mounting or dismounting of optic to weapon.
    • Designed to go rapidly and easily from head, helmet or hand held to weapons mounted.
    • The Multi-Flex Base allows optical alignment with most EOTech and Aimpoint scopes when mounting a PVS-14 behind these optics.
    • There is enough clearance for the GG&G A2 and MAD BUIS to mount under the Multi-Flex Base and be operational when the NVG is removed.
    • The unique QD ring remains attached to the night vision device at all times to interface with the weapon's mount in mere seconds.
    • Easy to manipulate QD lever with a large grooved finger pad.
    • Removal of mounting ring is not required to mount the night vision directly to a helmet or head mount.
    • Mounts directly to Mil-Spec flattop upper receiver.
    • Fully compatible with MIL-STD-1913 rails.
    • Material-Aluminum Parts: Aerospace 6061-T6 aluminum alloy.
    • Material-Steel Components: Manufactured from ordnance steel.
    • Finish-Aluminum Parts: Type III hard coat anodized to a matte black finish per mil-spec.
    • Finish-Steel Components: Manganese phosphated matte black per mil-spec.
    • Weight: 3.4 oz.
    Learn More
  16. GGG-1016-R : QD Multi-Flex 6015/PVS14 Mounting Ring

    The PVS-14 Quick Detach Multi-Flex Night Vision Mount for the ITT PVS-14 or Exelis PVS-14 series of night vision monoculars, is designed to go rapidly and easily from a head/helmet mount or hand surveillance mode to a weapon mount. Once the ergonomically designed base is installed on the weapon and the adapter ring is installed to the PVS-14, just the rotation of the grooved locking lever will rigidly lock the PVS-14 into place. Just as quickly, it can be removed and used to meet a tactical situation. Our unique QD PVS-14 adapter ring remains attached to the night vision monocular at all times and interfaces with the weapon's mount in mere seconds.

    • A quick and fast quick detach lever allows fast mounting or dismounting of optic to weapon.
    • Designed to go rapidly and easily from head, helmet or hand held to weapons mounted.
    • The Multi-Flex Base allows optical alignment with most EOTech and Aimpoint scopes when mounting a PVS-14 behind these optics.
    • There is enough clearance for the GG&G A2 and MAD BUIS to mount under the Multi-Flex Base and be operational when the NVG is removed.
    • The unique QD ring remains attached to the night vision device at all times to interface with the weapon's mount in mere seconds.
    • Easy to manipulate QD lever with a large grooved finger pad.
    • Removal of mounting ring is not required to mount the night vision directly to a helmet or head mount.
    • Mounts directly to Mil-Spec flattop upper receiver.
    • Fully compatible with MIL-STD-1913 rails.
    • Material-Aluminum Parts: Aerospace 6061-T6 aluminum alloy.
    • Material-Steel Components: Manufactured from ordnance steel.
    • Finish-Aluminum Parts: Type III hard coat anodized to a matte black finish per mil-spec.
    • Finish-Steel Components: Manganese phosphated matte black per mil-spec.
    • Weight: 3.4 oz.
    Learn More
  17. GGG-1023 : Front Flip Up For Dovetailed Gas Blocks

    Many shooters feel that the standard AR-15 removable front sights are too cumbersome to use, too easily misplaced, and distracting when optical sights are deployed. The GG&G Flip Up Front Sight for AR-15 Dovetailed Gas Blocks has been developed as an easy-to-install, lightweight, rapidly deployable flip up front sight with a mechanical locking detent system.

    • Easy installation to common dovetails or MIL-STD-1913 dovetails.
    • To ensure flexibility, we use standard military sight components in this combat ready sight.
    • The push button mechanical locking detent system allows for instant raising or lowering of the sight, while keeping the stem firmly locked into position when deployed.
    • Gripping serrations are provided on the protective ears to easily raise or lower the sight assembly in combat environments.
    • When used on a lowered railed gas block, the front sight stem provides the same height as the original AR-15/M16 front sight.
    • Compatible with A1, A2 and most Tritium front sight posts.
    • The Flip Up Front Sight for AR-15 Dovetailed Gas Blocks is compatible with DPMS LR series rifles.
    • As an ordering option, a Trijicon Tritium Green Front Sight post can be ordered with the sight.
    • All hard edges have been deburred and softened for the shooter's safety.
    • Material: The GG&G Flip Up Front Sight for Dovetailed Gas Blocks is manufactured from solid billet 4140 chrome moly steel.
    • Finish: Bead blasted and manganese phosphated to provide a non-reflective, corrosion resistant matte black finish meeting Mil-Spec requirements.
    • Weight: 3.2 oz.
    Learn More
  18. GGG-1023T : Front Flip Up For Dovetailed Gas Blocks with Tritium Front Sight Post

    Many shooters feel that the standard AR-15 removable front sights are too cumbersome to use, too easily misplaced, and distracting when optical sights are deployed. The GG&G Flip Up Front Sight for AR-15 Dovetailed Gas Blocks has been developed as an easy-to-install, lightweight, rapidly deployable flip up front sight with a mechanical locking detent system.

    • Easy installation to common dovetails or MIL-STD-1913 dovetails.
    • To ensure flexibility, we use standard military sight components in this combat ready sight.
    • The push button mechanical locking detent system allows for instant raising or lowering of the sight, while keeping the stem firmly locked into position when deployed.
    • Gripping serrations are provided on the protective ears to easily raise or lower the sight assembly in combat environments.
    • When used on a lowered railed gas block, the front sight stem provides the same height as the original AR-15/M16 front sight.
    • Compatible with A1, A2 and most Tritium front sight posts.
    • The Flip Up Front Sight for AR-15 Dovetailed Gas Blocks is compatible with DPMS LR series rifles.
    • As an ordering option, a Trijicon Tritium Green Front Sight post can be ordered with the sight.
    • All hard edges have been deburred and softened for the shooter's safety.
    • Material: The GG&G Flip Up Front Sight for Dovetailed Gas Blocks is manufactured from solid billet 4140 chrome moly steel.
    • Finish: Bead blasted and manganese phosphated to provide a non-reflective, corrosion resistant matte black finish meeting Mil-Spec requirements.
    • Weight: 3.2 oz.
    Learn More
  19. GGG-1028 : GS-1 Rail Flat

    Our GS-1 FIRE System optical mounting rail was designed for mounting a conventional type scope on the AR/15/M16. It provides significantly longer eye relief for a proper scope/operator interface and the capability of attaching additional optical devices, such as a night vision monocular. The back of the rifle scope rail has been tapered to blend with the rear of the upper receiver and is not designed to mount a BUIS flip-up rear sight. It extends three inches over the hand guards and clears the M4 forearm.

    There are numerous tactical situations where an extended scope rail creates an advantage for the AR-15 or M-16 user. GG&G's scope mounting rail allows for accuracy at greater distances approaching what you would expect for a bolt action rifle. This allows for more cover choices, a higher degree of stealth and increased survivability in police and combat situations. Furthermore, the extended scope ring rail gives the M16 and AR15 operator more personal choice in selecting a preferred optical configuration which may previously have been unmountable.

    Manufactured from billet 6061 T6 aluminum alloy and Type III black hard-coat anodized, the GS-1 rail mounted scope meets MIL-STD-1913. As with the other FIRE System rails, it locks onto the flat top receiver by means of a full length locking side bar and two rounded socket head cap screws. The socket head wrench required for installation is included.

    Learn More
  20. GGG-1030 : Benelli Tactical Bolt Release Button - Tactical Black

    Benelli Tactical Bolt Release For The M1, M2, And M3 Benelli Shotguns:

    During the high stress encountered in most tactical environments, it's extremely difficult to locate by feel the small bolt release button found on the Benelli M1 Super 90, M2, M3 and the M3 Super 90. To improve tactile recognition, we developed an oversize tactical Benelli bolt release pad for these popular shotguns. The Benelli bolt release is an accessory that could very well save your life in a fire fight. You can now personalize your Benelli with custom colored tactical bolt release pads.
     
    Benelli Tactical Bolt Release Specifications:

    The knurled pad is easy to locate by touch and manipulate, even with a gloved hand.
    The GG&G Benelli Tac Pad is manufactured to not rotate as other pads in the market place do.
    The Benelli Bolt Release Pad is very easy to install. Installation only requires basic tools and mechanical skills.
    All parts and instructions are included in the Tactical Bolt Release kit.
    The price includes a new factory Benelli carrier latch, modified for the new tac pad. You do not have to drill and tap any item in this kit.
    Available in four custom colors.
    All edges have been rounded and de-burred for the shooters safety.
    Material: The GG&G Benelli Tactical Bolt Release Pad is manufactured from 6061 T6 aircraft grade aluminum
    Size: 1 1/4" x 5/8".
    Finish: Anodized in four custom colors.
    Made in America By Men And Women Proud To Be Americans.

    Learn More
  21. GGG-1030-M4 : Benelli Tactical Bolt Release Button - Tactical Black

    Benelli Tactical Bolt Release For The M1, M2, And M3 Benelli Shotguns:

    During the high stress encountered in most tactical environments, it's extremely difficult to locate by feel the small bolt release button found on the Benelli M1 Super 90, M2, M3 and the M3 Super 90. To improve tactile recognition, we developed an oversize tactical Benelli bolt release pad for these popular shotguns. The Benelli bolt release is an accessory that could very well save your life in a fire fight. You can now personalize your Benelli with custom colored tactical bolt release pads.
     
    Benelli Tactical Bolt Release Specifications:

    The knurled pad is easy to locate by touch and manipulate, even with a gloved hand.
    The GG&G Benelli Tac Pad is manufactured to not rotate as other pads in the market place do.
    The Benelli Bolt Release Pad is very easy to install. Installation only requires basic tools and mechanical skills.
    All parts and instructions are included in the Tactical Bolt Release kit.
    The price includes a new factory Benelli carrier latch, modified for the new tac pad. You do not have to drill and tap any item in this kit.
    Available in four custom colors.
    All edges have been rounded and de-burred for the shooters safety.
    Material: The GG&G Benelli Tactical Bolt Release Pad is manufactured from 6061 T6 aircraft grade aluminum
    Size: 1 1/4" x 5/8".
    Finish: Anodized in four custom colors.
    Made in America By Men And Women Proud To Be Americans.

    Learn More
  22. GGG-1031 : Benelli Charging Handle M1, M2, M3 - Standard

    Benelli Tactical Charging Handle For M1, M2 And M3 Benelli Shotguns:

    The retracting bolt handle issued with the popular Benelli M1 Super 90, M2, and M3 fighting shotguns is difficult to grasp during the high anxiety associated with a gunfight. Failure to retract the bolt handle completely could lead to a catastrophic malfunction that is potentially fatal. To prevent this, our engineering staff has designed one of the most practical Benelli shotgun accessories on the market. It is an oversized, knurled, rotating Benelli Tactical Charging Handle for the Benelli law enforcement series shotguns. Just remove the small factory retracting handle and replace it with our superior Benelli M1 charging handle. It is not only easily grabbed, you can now personalize your Benelli with The GG&G Benelli M1, M2, And M3, Tactical Charging Handle With Custom Color Inserts.
     
    Benelli M1, M2 And M3 Tactical Charging Handle Specifications:

    Important: This Benelli Charging Handle is specifically designed, tested and manufactured for the Benelli M1, M2, and M3 12ga shotguns.
    The Benelli Tactical Charging Handle is much larger than the factory Benelli M1 charging handle providing a more positive method of charging, especially in stress fire situations.
    Available in the standard no-insert configuration, or select from five custom colors from Tactical Black To Ball Bustin Brass.
    Heavy knurling reduces the chance of your fingers or hand slipping off the charging handle during stress fire situations or when wearing gloves.
    Material: Benelli Charging Handle is made from 4140 ordnance steel, heat-treated to Rockwell 45 C hardness.
    Rounded edges provide a snag free operation.
    All edges are deburred for the shooters safety.
    Body Finish: non-reflective combat matte black, mil-spec manganese phosphate finish.
    Insert Finish: Anodized in five custom colors.
    Weight: 1.0 oz.
    Made in America By Men And Women Proud To Be Americans!

    Learn More
  23. GGG-1032 : Benelli Charging Handle M4 - Standard

    Benelli M4 Tactical Charging Handle:

    The retracting bolt handle issued with the popular Benelli M4 Tactical shotgun is difficult to grasp during the high anxiety associated with a gunfight. Failure to retract the bolt handle completely could lead to a catastrophic malfunction that is potentially fatal. To prevent this, our engineering staff has designed one of the most practical Benelli shotgun accessories on the market. It is an oversized, knurled, rotating Benelli Tactical Charging Handle for the Benelli law enforcement series shotguns. Just remove the small factory retracting handle and replace it with our superior Benelli M4 charging handle. You can now personalize your Benelli M4 with five custom colored charging handles with inserts.
     
    Benelli M4 Tactical Charging Handle Specifications:

    Important: The M4 Charging Handle is specifically designed, manufactured and tested for the Benelli M4 shotgun.
    The Benelli Tactical Charging Handle is much larger than the factory Benelli M4 charging handle providing a more positive method of charging, especially in stress fire situations.
    Heavy knurling reduces the chance of your fingers or hand slipping off the charging handle during stress fire situations or when wearing gloves.
    All edges are deburred for the shooters safety.
    Rounded edges provide a snag free operation.
    Material: The Benelli M4 Tactical Charging Handle is made from 4140 ordnance steel, heat-treated to Rockwell 45 C hardness.
    Body Finish: a non-reflective combat matte black mil-spec manganese phosphate finish.
    Insert Finish: Anodized in five custom colors.
    Weight: 1.0 oz.
    Made in America By Men And Women Proud To Be Americans!

    Learn More
  24. GGG-1033 : Flip Up Front Sight for Tactical Forearms

    Although the GG&G Flip Up Front Sight For Tactical Forearms was specifically designed to provide the correct sight height when mounted on a tactical forearm, this sight can also be installed on gas blocks that are at the same height as the upper receiver. It is manually operated versus spring-actuated and provides a smaller overall profile. Because of fewer sub-components, we can offer a better price to our customers.

    • Easy installation to common dovetails or MIL-STD-1913 dovetails.
    • The Flip Up Front Sight For Forearms locks securely in the upright and down positions to aid in preventing the accidental raising or lowering of the sight during tactical operations. After manually deploying the sight, the detent button must be pushed to release the mechanism to lower the sight.
    • Solid squeeze rail attachment mechanism.
    • The sight is compatible with all four models of the GG&G manufactured Rear Back Up Iron Sights.
    • The sight comes with a standard A2 front sight post and is adjustable for elevation. This AR -15 front sight is compatible with A1, A2 and most Tritium front posts.
    • All edges are smoothed and rounded for the shooter's safety.
    • Options include the installation of a Trijicon Tritium Green Front Sight post.
    • Material: Manufactured from tough 6061-T6 billet aluminum.
    • Finish: Type III hard coat anodized non-reflective matte black per Mil-Spec.
    • Weight: 1.25 oz.

    An optional Trijicon green tritium front sight post can be substituted for the standard front sight post to enhance low light shooting capability. The tritium front sight option is the perfect accessory for police and tactical users who may be moving in and out of darkness in real time.

    Learn More
  25. GGG-1033T : Flip Up Front Sight for Tactical Forearms w/ Tritium

    Although the GG&G Flip Up Front Sight For Tactical Forearms was specifically designed to provide the correct sight height when mounted on a tactical forearm, this sight can also be installed on gas blocks that are at the same height as the upper receiver. It is manually operated versus spring-actuated and provides a smaller overall profile. Because of fewer sub-components, we can offer a better price to our customers.

    • Easy installation to common dovetails or MIL-STD-1913 dovetails.
    • The Flip Up Front Sight For Forearms locks securely in the upright and down positions to aid in preventing the accidental raising or lowering of the sight during tactical operations. After manually deploying the sight, the detent button must be pushed to release the mechanism to lower the sight.
    • Solid squeeze rail attachment mechanism.
    • The sight is compatible with all four models of the GG&G manufactured Rear Back Up Iron Sights.
    • The sight comes with a standard A2 front sight post and is adjustable for elevation. This AR -15 front sight is compatible with A1, A2 and most Tritium front posts.
    • All edges are smoothed and rounded for the shooter's safety.
    • Options include the installation of a Trijicon Tritium Green Front Sight post.
    • Material: Manufactured from tough 6061-T6 billet aluminum.
    • Finish: Type III hard coat anodized non-reflective matte black per Mil-Spec.
    • Weight: 1.25 oz.

    An optional Trijicon green tritium front sight post can be substituted for the standard front sight post to enhance low light shooting capability. The tritium front sight option is the perfect accessory for police and tactical users who may be moving in and out of darkness in real time.

    Learn More
  26. GGG-1048 : Receiver End Plate Sling Attachment Looped Ambi

    Tactical Slings attached to the M16/AR15 Carbine at a single mounting point, without the use of the front sling swivel, have become quite popular.

    These sling attachment systems permit the operator to mount the weapon on either the primary or offside shoulder. As a result, during dynamic entries it becomes easier to "slice the pie" at doorways and move around corners, whether they are on the right or left side, without "telegraphing" the operator's presence. GG&G manufactures the Receiver End Plate Sling Adapter for this purpose.

    With this innovative accessory the operator can now attach the sling directly behind the receiver, in front of the collapsible buttstock. A significant advantage of this set up is that expanding or collapsing the buttstock does not affect the sling length.

    If you wear body armor, a tactical vest or a jacket, you no longer need to re-adjust the sling length due to the extra apparel.

    Learn More
  27. GGG-1049 : Receiver End Plate Sling Attachment Looped RH

    Tactical Slings attached to the M16/AR15 Carbine at a single mounting point, without the use of the front sling swivel, have become quite popular.

    These sling attachment systems permit the operator to mount the weapon on either the primary or offside shoulder. As a result, during dynamic entries it becomes easier to "slice the pie" at doorways and move around corners, whether they are on the right or left side, without "telegraphing" the operator's presence. GG&G manufactures the Receiver End Plate Sling Adapter for this purpose.

    With this innovative accessory the operator can now attach the sling directly behind the receiver, in front of the collapsible buttstock. A significant advantage of this set up is that expanding or collapsing the buttstock does not affect the sling length.

    If you wear body armor, a tactical vest or a jacket, you no longer need to re-adjust the sling length due to the extra apparel.

    Learn More
  28. GGG-1049L : Receiver End Plate Sling Attachment Looped LH

    Tactical Slings attached to the M16/AR15 Carbine at a single mounting point, without the use of the front sling swivel, have become quite popular.

    These sling attachment systems permit the operator to mount the weapon on either the primary or offside shoulder. As a result, during dynamic entries it becomes easier to "slice the pie" at doorways and move around corners, whether they are on the right or left side, without "telegraphing" the operator's presence. GG&G manufactures the Receiver End Plate Sling Adapter for this purpose.

    With this innovative accessory the operator can now attach the sling directly behind the receiver, in front of the collapsible buttstock. A significant advantage of this set up is that expanding or collapsing the buttstock does not affect the sling length.

    If you wear body armor, a tactical vest or a jacket, you no longer need to re-adjust the sling length due to the extra apparel.

    Learn More
  29. GGG-1055 : Under Foregrip Mounting Rail (UFIR)

    Vertical foregrips and other accessories mounted at the 6 o'clock position on shoulder fired weapons have become prominent in military, law enforcement and civilian arenas. However, not every agency or individual for that matter, can afford or justify the purchase of a forearm assembly surrounded by multiple rails, when all they want to do is add a vertical foregrip, flashlight, bipod or other accessory to the weapon at the 6 o'clock position.

    • Very low profile design.
    • Installs easily with just hand tools.
    • Mounting system provides rugged 3 point mounting.
    • Inexpensive alternative to a quad railed tactical forearm.
    • Compatible with Mil-Spec standard carbine or M4 handguard.
    • Perfect for mounting a verticle grip, flashlight or bipod.
    • No permanent alteration to forearm necessary for installation.
    • The UFIR has 11 mounting cross lugs and is machined to MIL-STD-1913 specifications.
    • Edges are smoothed and rounded for the shooter's safety.
    • Manufactured from 6061-T6 solid billet aluminum and Type III hard-coat anodized matte black per Mil-Spec.
    • Length: 4.625".
    • Weight: 1.6 oz.
    Learn More
  30. GGG-1068 : Remington 870 Scope Mount

    The GG&G one piece Remington 870 Receiver Scope Mount provides an easy way to mount a tactical scope to the factory drilled and tapped receiver of your Remington 870 shotgun.

    • Low profile design.
    • MIL-STD-1913 configuration.
    • Perfect for mounting a tactical scope to your Remington 870 shotgun.
    • Easy installation to factory drilled and tapped receivers, or receivers drilled and tapped for 6-48 threads.
    • Attaches with four steel Torx head screws. Torx wrench is included.
    • Precision machined from 6061-T6 billet aluminum.
    • All edges are smoothed and rounded for the shooter's safety.
    • Finish: Type III hard coat anodized non-reflective matte black finish per Mil-Spec.
    • Length: 5.5" long.
    • Weight: 1.2 oz.
    • Warranty: Lifetime.
    • Made In America By Men And Women Proud To Be Americans!
    Learn More
  31. GGG-1069 : Mossberg 930 Scope Mount

    The GG&G one piece Mossberg 930 Receiver Scope Mount provides an easy way to mount a tactical scope to the factory drilled and tapped receiver of your Mossberg 930 shotgun.

    • Low profile design.
    • MIL-STD-1913 configuration.
    • Perfect for mounting a tactical scope to your Mossberg 930 shotgun.
    • Easy installation to factory drilled and tapped receivers, or receivers drilled and tapped for 8-40 threads.
    • Attaches with four steel Torx head screws. Torx wrench is included.
    • Precision machined from 6061-T6 billet aluminum.
    • All edges are smoothed and rounded for the shooter's safety.
    • Finish: Type III hard coat anodized in a non-reflective matte black finish per Mil-Spec.
    • Length: 5.9" long.
    • Weight: 1.2 oz.
    • Warranty: Lifetime.
    • Made In America By Men And Women Proud To Be Americans!
    Learn More
  32. GGG-1072 : Receiver End Plate Sling Attachment Rectangular

    Tactical Slings attached to the M16/AR15 Carbine at a single mounting point, without the use of the front sling swivel, have become quite popular.

    These sling attachment systems permit the operator to mount the weapon on either the primary or offside shoulder. As a result, during dynamic entries it becomes easier to "slice the pie" at doorways and move around corners, whether they are on the right or left side, without "telegraphing" the operator's presence. GG&G manufactures the Receiver End Plate Sling Adapter for this purpose.

    With this innovative accessory the operator can now attach the sling directly behind the receiver, in front of the collapsible buttstock. A significant advantage of this set up is that expanding or collapsing the buttstock does not affect the sling length.

    If you wear body armor, a tactical vest or a jacket, you no longer need to re-adjust the sling length due to the extra apparel.

    Learn More
  33. GGG-1072A : Receiver End Plate Sling Attach. Rect. Ambi

    Tactical Slings attached to the M16/AR15 Carbine at a single mounting point, without the use of the front sling swivel, have become quite popular.

    These sling attachment systems permit the operator to mount the weapon on either the primary or offside shoulder. As a result, during dynamic entries it becomes easier to "slice the pie" at doorways and move around corners, whether they are on the right or left side, without "telegraphing" the operator's presence. GG&G manufactures the Receiver End Plate Sling Adapter for this purpose.

    With this innovative accessory the operator can now attach the sling directly behind the receiver, in front of the collapsible buttstock. A significant advantage of this set up is that expanding or collapsing the buttstock does not affect the sling length.

    If you wear body armor, a tactical vest or a jacket, you no longer need to re-adjust the sling length due to the extra apparel.

    Learn More
  34. GGG-1072L : Receiver End Plate Sling Attach. Rect. Left Hand

    Tactical Slings attached to the M16/AR15 Carbine at a single mounting point, without the use of the front sling swivel, have become quite popular.

    These sling attachment systems permit the operator to mount the weapon on either the primary or offside shoulder. As a result, during dynamic entries it becomes easier to "slice the pie" at doorways and move around corners, whether they are on the right or left side, without "telegraphing" the operator's presence. GG&G manufactures the Receiver End Plate Sling Adapter for this purpose.

    With this innovative accessory the operator can now attach the sling directly behind the receiver, in front of the collapsible buttstock. A significant advantage of this set up is that expanding or collapsing the buttstock does not affect the sling length.

    If you wear body armor, a tactical vest or a jacket, you no longer need to re-adjust the sling length due to the extra apparel.

    Learn More
  35. GGG-1073 : Looped Receiver End Plate Sling Attachment-Fixed Stocks

    Fixed stock sling adapters for the AR-15 make your rifle comfortable to carry and ready in any sudden tactical situation. GG&G has expanded its line of Receiver End Plate Sling Adapters For Fixed Stocks with a new model that will accommodate the HK Style Snap Hooks and Mash Hooks.

    Many operators prefer the AR15/M16 with a fixed stock as it provides a somewhat more stable firing platform and likewise prefer the HK style snap hook, quick clip or mash hook to the conventional sling attachment. Because of the lack of an alternative method, most shooters have just clipped into a standard sling swivel. Although this works, it is noisy and provides a loose and sloppy sling attachment, opening the door for a precision fixed stock sling adapter.

    The GG&G AR15/M16 Fixed Stock Receiver End Plate For HK Style Snap Hooks and Mash Hooks is a great lightweight and rugged alternative to clipping into the standard sling swivel. Installation of this unique accessory is easily accomplished, requiring removal of the fixed buttstock and installation of the new GG&G Receiver End Plate, adapter spacer and longer screw, all included in the package. This lightweight sling accessory weighs in at less than one ounce. It is machined from 7075 billet aluminum and is Type III hard-coat anodized matte black per mil-spec.

    Although primarily used as a single point attachment method, a dual point sling system can also be employed with this attachment.

    Learn More
  36. GGG-1074 : Mossberg 500/590 Late Model Post '97 Scope Mount

    The GG&G one piece Mossberg 500/590 Receiver Scope Mount provides an easy way to mount a tactical scope to the factory drilled and tapped receiver of your Mossberg 500 and 590 shotguns. The design of the Mossberg 500/590 Scope Rail provides that low-profile factory look.

    • Low profile design.
    • MIL-STD-1913 configuration.
    • Perfect for mounting a tactical scope to your Mossberg 500 and Mossberg 590 shotguns.
    • Easy installation to factory drilled and tapped receivers, or receivers drilled and tapped for 8-40 threads.
    • Attaches with four steel Torx head screws. Torx wrench is included.
    • Precision machined from 6061-T6 billet aluminum.
    • All edges are smoothed and rounded for the shooter's safety.
    • Finish: Type III hard coat anodized in a non-reflective matte black finish per Mil-Spec.
    • Length: 5.9" long.
    • Weight: 1.4 oz.
    • Warranty: Lifetime.
    • Made In America By Men And Women Proud To Be Americans!
    Learn More
  37. GGG-1077 : Benelli M2 Scope Mount

    The GG&G one piece Benelli M2 Receiver Scope Mount provides an easy way to mount a tactical scope to the factory drilled and tapped receiver of your Benelli M2 shotgun. The Benelli M2 Scope Rail fits just in front of the factory rear sight for that low-profile factory look. The Benelli M2 Scope Rail will also fit the Benelli M4 Scope Rail if the factory rail is damaged or is missing from a used Benelli M4.

    • Low profile design.
    • MIL-STD-1913 configuration.
    • Perfect for mounting a tactical scope to your Benelli M2 shotgun.
    • Easy installation to factory drilled and tapped receivers, or receivers drilled and tapped for 8-40 threads.
    • Attaches with four steel Torx head screws. Torx wrench is included.
    • Precision machined from 6061-T6 billet aluminum.
    • All edges are smoothed and rounded for the shooter's safety.
    • Finish: Type III hard coat anodized in a non-reflective matte black finish per Mil-Spec.
    • Length: 4.5".
    • Weight: 1.2 oz.
    • Warranty: Lifetime.
    • Made In America By Men And Women Proud To Be Americans!
    Learn More
  38. GGG-1084 : Remington 870 Ambidextrous Front Sling Attachment. Will also fit 1100 and 1187

    FRONT SLING ATTACHMENT SPECIFICATIONS:

    • Compact & easy to install.
    • Designed and manufactured to withstand the rigors associated with professional use.
    • Ambidextrous.
    • The Remington 870 Front Sling Attachment solidly mounts behind the end cap of the magazine tube.
    • Manufactured with a stainless steel ball bearing detent to secure the unit behind the end cap of the magazine tube.
    • The 870 Sling Attachment provides the preferred front side sling mounting position for 1 1/4" slings.
    • Besides the Remington 870, the GG&G 870 Front Sling Attachment fits 12 gauge Remington 1100's and 1187's.
    • All edges have been dehorned and rounded for the shooters safety.
    • Material: Manufactured from tough AS-35 Geneva steel.
    • Finish: Bead blasted and manganese phosphate finished in non-reflective matte black per Mil-Spec.
    • Weight 1.0 oz.

    REAR SLING ATTACHMENT SPECIFICATIONS:

    • Compact & easy to install.
    • Designed and manufactured to withstand the rigors associated with professional use.
    • The Remington 870 Rear Sling Attachment mounts just behind the receiver.
    • The GG&G Remington 870 Rear Sling Mount provides the preferred rear side sling mounting position for 1 1/4" slings.
    • This Rear Sling Attachment can be used with a two point sling set up or as a single point sling attachment.
    • When used as a Remington 870 Single Point Sling Attachment, it allows the operator to mount the weapon on either the primary or offside shoulder. As a result, during dynamic entries it becomes easier to "cut the pie" at doorways and move around corners, whether they are on the right side or left side, without telegraphing the operator's position. In addition, slings attached to a single point mount work especially well when operators are deployed wearing body armor or are involved in breaching operations.
    • Will also fit 12 gauge Remington 1100's and 1187's.
    • All edges have been dehorned and rounded for the shooters safety.
    • Material: Manufactured from solid billet 7075-T6 aluminum.
    • Finish: Bead blasted and Type III Hard coat anodized in non-reflective matte black per Mil-Spec.
    • Weight: 1.0 oz.
    Learn More
  39. GGG-1084-2 : Mossberg 590 Ambidextrous Front Sling Attachment

    FRONT SLING ATTACHMENT SPECIFICATIONS:

    • Compact & easy to install.
    • Designed and manufactured to withstand the rigors associated with professional use.
    • The Mossberg 590 Front Sling Attachment solidly mounts behind the end cap of the magazine tube.
    • A ball bearing detent on the Mossberg Sling Attachment helps secure the unit behind the magazine tubes end cap.
    • Ambidextrous.
    • The 590 Front Sling Attachment provides the preferred front side sling mounting position for 1 1/4" slings.
    • All edges have been dehorned and rounded for the shooters safety.
    • Material: Manufactured from tough AS-35 Geneva steel.
    • Finish: Bead blasted and manganese phosphate finished in non-reflective matte black per Mil-Spec.
    • Weight: 1.2 oz.

    REAR SLING ATTACHMENT SPECIFICATIONS:

    • Compact & easy to install.
    • Designed and manufactured to withstand the rigors associated with professional use.
    • The Mossberg 590 Rear Sling Attachment will not fit the Blackhawk, Knoxx Spec-Ops Recoil Compensating Stock.
    • The Mossberg 590 Rear Sling Attachment mounts just behind the receiver.
    • The GG&G 590 Rear Sling Attachment provides the preferred rear side sling mounting position for 1 1/4" slings.
    • This 590 Rear Sling Attachment can be used with a two point sling set up or as a single point sling attachment.
    • When used as a 590 Single Point Sling Attachment, it allows the operator to mount the weapon on either the primary or offside shoulder. As a result, during dynamic entries it becomes easier to "cut the pie" at doorways and move around corners, whether they are on the right side or left side, without telegraphing the operator's position. In addition, slings attached to a single point mount work especially well when operators are deployed wearing body armor or are involved in breaching operations.
    • Also fits 12 gauge Mossberg 500's and Maverick 88's.
    • All edges have been dehorned and rounded for the shooters safety.
    • Material: Manufactured from solid billet 7075-T6 aluminum.
    • Finish: Bead blasted and Type III Hard coat anodized in non-reflective matte black per Mil-Spec.
    • Weight: 1.2 oz.
    Learn More
  40. GGG-1091 : Bipod Adapter For Savage 110 BA

    Adapters are often necessary to attach a bipod to your favorite carbine or rifle. GG&G manufactures five Bipod Adapter Rails for light and heavy caliber applications.

    • All GG&G Bipod Adapters are built to meet the high standards of serious professional end users.
    • Material: Precision machined from 6061-T6 billet aluminum
    • Finish: Aluminum components are Type III hard anodized matte black to meet Mil-Spec. The miscellaneous mounting hardware and pins, if required for specific applications, are manufactured from steel and manganese phosphated per Mil-Spec.
    • Warranty: Lifetime.
    • Made In America By Men And Women Proud To Be Americans!

    The GG&G Savage 110BA Adapter (GGG-1091) is specifically manufactured for the Savage 110BA Non-Stealth model. It Will Not Fit The 110BA Stealth Model. However, the GGG-1789 Swivel Stud To Picatinny Rail Adapter will fit the Savage 110BA Stealth model.

    Learn More
  41. GGG-1103 : 014 Universal CQB, Black With ERB

    It's been said that a long gun without a sling is like a handgun without a holster. We strongly believe that to be a true statement. But, not all slings are created equal. Our CQB 3 Point Tactical Slings are simple, versatile, durable, and affordable. The 3 point sling design is nothing new. However, we've refined the design to deliver a truly functional sling which works.

    All of the Specter CQB Tactical Slings are made from heavy duty 1.25" wide nylon webbing which is durable, yet comfortable, and doesn't abrade the skin or generate a noise signature. We use only the best quality hardware and hook and loop fasteners. All of our slings are sewn by skilled technicians on industrial machines using heavy duty nylon thread with all stress points reinforced for maximum durability.

    Since 2004 all Specter CQB Slings are fully modular and fully ambidextrous. Utilizing the same front and rear adapters as our SOP Sling Series, CQB Slings can be easily set up for left or right hand applications. Additionally, our CQB Slings can also be completely disassembled should you change your weapon configuration or wish to add features to your sling.

    Our Universal CQB Slings are designed to fit weapons with existing factory or aftermarket side mounted front & rear sling loops such as the Steyr AUG or the M-4. These slings are 1.25" wide, available from GG&G in Black and come with the Emergency Release Buckle (ERB).

    The ERB allows users to rapidly and efficiently disengage the slung weapon from their body should the sling become entangled with an obstacle or if an opponent should try to use the sling to the disadvantage of an operator during a weapon retention situation.

    Learn More
  42. GGG-1120 : ETI UFIR For AR15/M16 Rifle Forearms

    Although the M4 configured weapon system is extremely popular today, we have had many requests from our customers to manufacture a MIL-STD-1913 Under Forearm Integrated Rail for the AR15/M16 Rifle. The GG&G ETI UFIR is in response to those requests. What makes it extremely unique, is that it can be installed into the vent holes of the lower handguard without removing it from the weapon. In addition, no backing bushing, nut-serts or miscellaneous fasteners of any kind are required. The unique integral camming attachment system allows the rail to be easily installed and removed with a flat tip screwdriver without any alteration to the handguard.

    • Easily installed.
    • Ideal to mount vertical grips, bipods and lights.
    • Does not require removal of handguard.
    • Only fits Rifle length Mil-Spec handguards.
    • Unique integral camming attachment system.
    • No alteration to handguards required.
    • 12 mounting recoil cross slots, machined to MIL-STD-1913 specs.
    • Length: 5 inches long.
    • Materials: 6061-T6 billet aluminum alloy
    • Finish: Type III hard coat anodized Matte black per Mil- Spec
    • Weight: 1.9 OZ
    • Warranty: Lifetime
    • Made In America By Men And Women Proud To Be Americans!
    Learn More
  43. GGG-1125 : Standard XDS Swivel Bipod

    The Standard XDS Bipod offers a greater range than previous versions. In addition to a stronger pivot mechanism, the GG&G folding AR-15 bipod design affords 25 degrees of cant in either direction of center. Not only does this increase better rough terrain adjustability, but this pivoting capability allows the deployed bipod leg to be used as a vertical foregrip if required for rapid transition. In addition, a tension mechanism and adjustment knob has been added so that the operator does not need tools to make tension adjustments to the swivel.

    • The XDS bipod attaches to any MIL-STD-1913 or Weaver dovetail rail without an adapter.
    • The Bipod features 25 degrees of cant to the left and right that is tension adjustable.
    • The height of the XDS bipod can be adjusted from 7" to 9.25" when measured from the bottom of the dovetail to the bottom of the foot pads.
    • Fully adjustable legs with thumb nut adjustments and silent deployment.
    • Grip tight foot pads.
    • Tool-less cant tension adjustment.
    • Deployed legs can be used as a vertical grip.
    • Manufactured to meet current Military specifications for extreme weather and drop tests.
    • Material: All aluminum components are manufactured from 6061-T6 aircraft grade aluminum.
    • Material: All steel components are manufactured from 4130 steel.
    • Finish: All aluminum components are Type III hard anodized in a non-reflective matte black finish per Mil-Spec.
    • Finish: All steel components are manganese phosphate matte black per Mil-Spec.
    • Weight: 11.5 oz.
    • Warranty: Lifetime.
    • Made In America By Men And Women Proud To Be Americans!
    Learn More
  44. GGG-1129 : Remington 870 Single Point Sling Attachment Will also fit 1100 and 1187

    FRONT SLING ATTACHMENT SPECIFICATIONS:

    • Compact & easy to install.
    • Designed and manufactured to withstand the rigors associated with professional use.
    • Ambidextrous.
    • The Remington 870 Front Sling Attachment solidly mounts behind the end cap of the magazine tube.
    • Manufactured with a stainless steel ball bearing detent to secure the unit behind the end cap of the magazine tube.
    • The 870 Sling Attachment provides the preferred front side sling mounting position for 1 1/4" slings.
    • Besides the Remington 870, the GG&G 870 Front Sling Attachment fits 12 gauge Remington 1100's and 1187's.
    • All edges have been dehorned and rounded for the shooters safety.
    • Material: Manufactured from tough AS-35 Geneva steel.
    • Finish: Bead blasted and manganese phosphate finished in non-reflective matte black per Mil-Spec.
    • Weight 1.0 oz.

    REAR SLING ATTACHMENT SPECIFICATIONS:

    • Compact & easy to install.
    • Designed and manufactured to withstand the rigors associated with professional use.
    • The Remington 870 Rear Sling Attachment mounts just behind the receiver.
    • The GG&G Remington 870 Rear Sling Mount provides the preferred rear side sling mounting position for 1 1/4" slings.
    • This Rear Sling Attachment can be used with a two point sling set up or as a single point sling attachment.
    • When used as a Remington 870 Single Point Sling Attachment, it allows the operator to mount the weapon on either the primary or offside shoulder. As a result, during dynamic entries it becomes easier to "cut the pie" at doorways and move around corners, whether they are on the right side or left side, without telegraphing the operator's position. In addition, slings attached to a single point mount work especially well when operators are deployed wearing body armor or are involved in breaching operations.
    • Will also fit 12 gauge Remington 1100's and 1187's.
    • All edges have been dehorned and rounded for the shooters safety.
    • Material: Manufactured from solid billet 7075-T6 aluminum.
    • Finish: Bead blasted and Type III Hard coat anodized in non-reflective matte black per Mil-Spec.
    • Weight: 1.0 oz.
    Learn More
  45. GGG-1129L : Remington 870 Single Point Sling Attachment Left Hand Will also fit 1100 and 1187

    FRONT SLING ATTACHMENT SPECIFICATIONS:

    • Compact & easy to install.
    • Designed and manufactured to withstand the rigors associated with professional use.
    • Ambidextrous.
    • The Remington 870 Front Sling Attachment solidly mounts behind the end cap of the magazine tube.
    • Manufactured with a stainless steel ball bearing detent to secure the unit behind the end cap of the magazine tube.
    • The 870 Sling Attachment provides the preferred front side sling mounting position for 1 1/4" slings.
    • Besides the Remington 870, the GG&G 870 Front Sling Attachment fits 12 gauge Remington 1100's and 1187's.
    • All edges have been dehorned and rounded for the shooters safety.
    • Material: Manufactured from tough AS-35 Geneva steel.
    • Finish: Bead blasted and manganese phosphate finished in non-reflective matte black per Mil-Spec.
    • Weight 1.0 oz.

    REAR SLING ATTACHMENT SPECIFICATIONS:

    • Compact & easy to install.
    • Designed and manufactured to withstand the rigors associated with professional use.
    • The Remington 870 Rear Sling Attachment mounts just behind the receiver.
    • The GG&G Remington 870 Rear Sling Mount provides the preferred rear side sling mounting position for 1 1/4" slings.
    • This Rear Sling Attachment can be used with a two point sling set up or as a single point sling attachment.
    • When used as a Remington 870 Single Point Sling Attachment, it allows the operator to mount the weapon on either the primary or offside shoulder. As a result, during dynamic entries it becomes easier to "cut the pie" at doorways and move around corners, whether they are on the right side or left side, without telegraphing the operator's position. In addition, slings attached to a single point mount work especially well when operators are deployed wearing body armor or are involved in breaching operations.
    • Will also fit 12 gauge Remington 1100's and 1187's.
    • All edges have been dehorned and rounded for the shooters safety.
    • Material: Manufactured from solid billet 7075-T6 aluminum.
    • Finish: Bead blasted and Type III Hard coat anodized in non-reflective matte black per Mil-Spec.
    • Weight: 1.0 oz.
    Learn More
  46. GGG-1130 : Receiver End Plate Sling Attach. For Fixed Stocks

    Tactical slings attached to shoulder-mounted weapons at a single mounting point, without the use of the front sling swivel, are extremely popular in both military and law enforcement special operations.

    These systems permit the operator to mount the weapon on either the primary or offside shoulder. As a result, during dynamic entries it becomes easier to "slice the pie" at doorways and to move around corners, whether they are on the right or left side, without "telegraphing" the operator's presence.

    For federal or military orders the NSN number is NSN 1005-01-527-6332.

    Learn More
  47. GGG-1130L : Receiver End Plate Sling Attach. Fixed Stocks Left Hand

    Tactical slings attached to shoulder-mounted weapons at a single mounting point, without the use of the front sling swivel, are extremely popular in both military and law enforcement special operations.

    These systems permit the operator to mount the weapon on either the primary or offside shoulder. As a result, during dynamic entries it becomes easier to "slice the pie" at doorways and to move around corners, whether they are on the right or left side, without "telegraphing" the operator's presence.

    For federal or military orders the NSN number is NSN 1005-01-527-6332.

    Learn More
  48. GGG-1131 : Offset Tactical Flashlight Mount

    Flashlights attached to shoulder-mounted weaponry are a necessary requirement for urban warfare. Until now, attempting to use a tactical flashlight in conjunction with a vertical foregrip resulted in three scenarios: 1.Purchase an expensive combination vertical foregrip/flashlight. 2.While trying to maintain a grip on the vertical foregrip, attempt an uncomfortable and dangerous rotation of the grip hand to try to get the thumb high enough to engage the rear of the flashlight typically mounted at the three o'clock or nine o'clock position (strong left shooter). 3.Use an expensive and somewhat messy pig tail with a pressure pad glued to the foregrip or forearm that could hang you up at a critical time.

    GG&G's staff has solved the problem of interfacing a vertical foregrip with a weapon-mounted flashlight by creating the Offset Tactical Flashlight Mount For Use With Vertical Foregrips. It places the tactical flashlight, offset to the right or left of the weapon's forearm at about 5 o'clock or 7 o'clock, respectively. This permits the operator to manipulate with the thumb, the illuminator's rocker switch laser button or rear pressure button of other tactical flashlights, while the support hand remains solidly on the vertical foregrip.

    This tactical light mount comes complete with an integral MIL-STD-1913 Picatinny rail. The rail is perfect for attaching a Surefire or other small flashlight by means of a standard ring. The Offset Tactical Flashlight Mount is a lightweight accessory at only 1.4 ounces.
    The Offset Tactical Flashlight Mount For Use With Vertical Foregrips can be mounted on the GG&G UFIR, or any of the GG&G Tactical Modular Forearms, or any other integrated rail system. This ambidextrous mount is attached by means of a squeeze rail. Manufactured from aircraft grade 6061 billet aluminum alloy, it has been Type III hard-coat anodized per mil-spec in a matte black combat finish.

    The offset tactical flashlight mounts from GG&G are made in the USA at our Tucson, AZ factory. When purchasing any part that mounts on to your gun you want to make sure it fits perfectly as per mil spec standards, and it isn't going to rattle or move later on. On an AR-15, M16, or M4, stealth and surprise are essential, and accuracy is paramount. Every AR 15 flashlight mount from GG&G is made from top grade materials because it may be used in the field by military and police units who can't compromise the tactical advantage that comes with the right equipment.

    Learn More
  49. GGG-1132 : Mossberg 590 & 500 Single Point Sling Attachment

    FRONT SLING ATTACHMENT SPECIFICATIONS:

    • Compact & easy to install.
    • Designed and manufactured to withstand the rigors associated with professional use.
    • The Mossberg 590 Front Sling Attachment solidly mounts behind the end cap of the magazine tube.
    • A ball bearing detent on the Mossberg Sling Attachment helps secure the unit behind the magazine tubes end cap.
    • Ambidextrous.
    • The 590 Front Sling Attachment provides the preferred front side sling mounting position for 1 1/4" slings.
    • All edges have been dehorned and rounded for the shooters safety.
    • Material: Manufactured from tough AS-35 Geneva steel.
    • Finish: Bead blasted and manganese phosphate finished in non-reflective matte black per Mil-Spec.
    • Weight: 1.2 oz.

    REAR SLING ATTACHMENT SPECIFICATIONS:

    • Compact & easy to install.
    • Designed and manufactured to withstand the rigors associated with professional use.
    • The Mossberg 590 Rear Sling Attachment will not fit the Blackhawk, Knoxx Spec-Ops Recoil Compensating Stock.
    • The Mossberg 590 Rear Sling Attachment mounts just behind the receiver.
    • The GG&G 590 Rear Sling Attachment provides the preferred rear side sling mounting position for 1 1/4" slings.
    • This 590 Rear Sling Attachment can be used with a two point sling set up or as a single point sling attachment.
    • When used as a 590 Single Point Sling Attachment, it allows the operator to mount the weapon on either the primary or offside shoulder. As a result, during dynamic entries it becomes easier to "cut the pie" at doorways and move around corners, whether they are on the right side or left side, without telegraphing the operator's position. In addition, slings attached to a single point mount work especially well when operators are deployed wearing body armor or are involved in breaching operations.
    • Also fits 12 gauge Mossberg 500's and Maverick 88's.
    • All edges have been dehorned and rounded for the shooters safety.
    • Material: Manufactured from solid billet 7075-T6 aluminum.
    • Finish: Bead blasted and Type III Hard coat anodized in non-reflective matte black per Mil-Spec.
    • Weight: 1.2 oz.
    Learn More
  50. GGG-1132L : Mossberg 590 & 500 Single Point Sling Attachment Left Hand

    FRONT SLING ATTACHMENT SPECIFICATIONS:

    • Compact & easy to install.
    • Designed and manufactured to withstand the rigors associated with professional use.
    • The Mossberg 590 Front Sling Attachment solidly mounts behind the end cap of the magazine tube.
    • A ball bearing detent on the Mossberg Sling Attachment helps secure the unit behind the magazine tubes end cap.
    • Ambidextrous.
    • The 590 Front Sling Attachment provides the preferred front side sling mounting position for 1 1/4" slings.
    • All edges have been dehorned and rounded for the shooters safety.
    • Material: Manufactured from tough AS-35 Geneva steel.
    • Finish: Bead blasted and manganese phosphate finished in non-reflective matte black per Mil-Spec.
    • Weight: 1.2 oz.

    REAR SLING ATTACHMENT SPECIFICATIONS:

    • Compact & easy to install.
    • Designed and manufactured to withstand the rigors associated with professional use.
    • The Mossberg 590 Rear Sling Attachment will not fit the Blackhawk, Knoxx Spec-Ops Recoil Compensating Stock.
    • The Mossberg 590 Rear Sling Attachment mounts just behind the receiver.
    • The GG&G 590 Rear Sling Attachment provides the preferred rear side sling mounting position for 1 1/4" slings.
    • This 590 Rear Sling Attachment can be used with a two point sling set up or as a single point sling attachment.
    • When used as a 590 Single Point Sling Attachment, it allows the operator to mount the weapon on either the primary or offside shoulder. As a result, during dynamic entries it becomes easier to "cut the pie" at doorways and move around corners, whether they are on the right side or left side, without telegraphing the operator's position. In addition, slings attached to a single point mount work especially well when operators are deployed wearing body armor or are involved in breaching operations.
    • Also fits 12 gauge Mossberg 500's and Maverick 88's.
    • All edges have been dehorned and rounded for the shooters safety.
    • Material: Manufactured from solid billet 7075-T6 aluminum.
    • Finish: Bead blasted and Type III Hard coat anodized in non-reflective matte black per Mil-Spec.
    • Weight: 1.2 oz.
    Learn More
View as List Grid

Items 1-50 of 348

Page
per page
Set Descending Direction
In Stock
*Estimated delivery could vary on some products.

Following a manufacturers price increase, we reserve the right to change product prices at any time without further notice.


© 2021 CAI is a registered trademark of Civil Arms Inc. -All rights reserved.