Midwest Industries

Midwest Industries
View as List Grid

Items 1-50 of 394

Page
per page
Set Descending Direction
In Stock
  1. AK-GTSP : AK Gas Tube Side Plate

     For use with the MI-AK-RGT (Railed Gas Tube) and Universal Length G2 Handguards

     Lifetime Warranty

     100% Made in the U.SA.

    Learn More
  2. MCTAR-01G2 : Tactical Light Mount
    • Easy to install, one screw installation takes less than one minute
    • Extremely rigid, will not move once tightened due to taper and angled cuts
    • Can be used for both right handed and left handed shooters
    • Will fit any AR series rifle with standard front sight housing
    • MCTAR-01G2 has two mil-spec picatinny rails with two anti-rotation sling swivel sockets
    • Weight 2.1 oz
    Learn More
  3. MCTAR-02 : Forearm Light Mount - Short
    • Mounting hardware included
    • Will fit AR series handguards with large or small holes
    • Hard coat anodized 6061 aluminum construction
    • In most circumstances you will be able to use standard heat shields after installation
    • Weight .7 oz

    Note: Will not fit GEN2 SS Handguards.

    Learn More
  4. MCTAR-03 : Forearm Light Mount - Long
    • Mounting hardware included
    • Will fit AR series handguards with large or small holes
    • Hard coat anodized 6061 aluminum construction
    • In most circumstances you will be able to use standard heat shields after installation
    • Weight 1.7 oz

    Note: Will not fit GEN2 SS Handguards.

    Learn More
  5. MCTAR-06 : Sling Adaptor
    Midwest Industries
    MCTAR-06 : Sling Adaptor

    Constructed of 6061 aluminum, hard coat anodized to provide a lifetime of service

    Learn More
  6. MCTAR-07 : Sling Adaptor - With Stud

    Constructed of 6061 aluminum, hard coat anodized to provide a lifetime of service

    Learn More
  7. MCTAR-08 : QD Front Sling Adaptor

    Constructed of 6061 aluminum, hard coat anodized to provide a lifetime of service

    Learn More
  8. MCTAR-08HD : QD Front Sling Adaptor - Heavy Duty

    Constructed of 6061 aluminum, hard coat anodized to provide a lifetime of service

    Learn More
  9. MCTAR-13 : End Plate Adaptor - Loop

    Work well in all types of configurations, including single point, two point or three point tactical slings.

    Easy, no gunsmith installation, no need for special tools or removal of buffer tube.

    Constructed of 6061 aluminum and hard coat anodized for a lifetime of service.

    Learn More
  10. MCTAR-13HD : End Plate Adaptor - Loop - Steel

    Has two loops that accept HK type clasps, fully ambidextrous.

    Easy, no gunsmith installation, no need for special tools or removal of buffer tube.

    Constructed from 4140 steel, phosphate finished for a lifetime of service.

    Lifetime warranty

    Made in the U.S.A.

    Learn More
  11. MCTAR-14 : End Plate Adaptor - Slot

    Work well in all types of configurations, including single point, two point or three point tactical slings.

    Easy, no gunsmith installation, no need for special tools or removal of buffer tube.

    Constructed of 6061 aluminum and hard coat anodized for a lifetime of service

    Learn More
  12. MCTAR-17G2 : G2 Two Piece Forearm Carbine Length-Black
    • No gunsmith drop-in installation, installs like factory plastic handguards!
    • Gen2 design with four anti-rotation QD sockets for push button swivels
    • Incredibly light weight, extremely solid lock-up with monolithic type continuous top rail
    • High quality 1913 mil spec rails, T-marked for location
    • MCTAR-17G2 Carbine Length: 7 inches Weight: 7.5 oz. and is now COLT COMPATIBLE
    • Constructed from 6061 aluminum hard coat anodized
    • Compatible with most gas piston systems
    • lifetime warranty

    100% made in the U.S.A.

    Learn More
  13. MCTAR-18G2 : G2 Two Piece Forearm Mid Length - Black
    • No gunsmith drop-in installation, installs like factory plastic handguards!
    • Gen2 design with four anti-rotation QD sockets for push button swivels
    • Incredibly light weight, extremely solid lock-up with monolithic type continuous top rail
    • High quality 1913 mil spec rails, T-marked for location
    • MCTAR-18G2 Mid-Length Length: 9 inches Weight: 9.7 oz.
    • Constructed from 6061 aluminum hard coat anodized
    • Compatible with most gas piston systems
    • Lifetime warranty

    100% Made in the U.SA.

    Learn More
  14. MCTAR-19G2 : G2 Two Piece Forearm Full Length - Black
    • No gunsmith drop-in installation, installs like factory plastic handguards!
    • Gen2 design with four anti-rotation QD sockets for push button swivels
    • Incredibly light weight, extremely solid lock-up with monolithic type continuous top rail
    • High quality 1913 mil spec rails, T-marked for location
    • MCTAR-19G2 Rifle Length: 12 inches Weight: 12.9 oz
    • Constructed from 6061 aluminum hard coat anodized
    • Compatible with most gas piston systems
    • Lifetime Warranty

    100% Made in the U.S.A.

    Learn More
  15. MCTAR-20G2 : GEN II Two Piece Free Float Carbine
    • Complete install in minutes, removal of delta ring is required
    • Four anti-rotation QD sockets for push button swivels
    • High quality 1913 mil-spec rails, T-marked for accessory location
    • Incredibly lightweight, extremely solid lock-up with monolithic type continuous top rail
    • Billet machined from 6061 aluminum and hard coat anodized
    • Carbine Length 7 inches Weight 9.0 oz.
    • Piston compatible Works with most well known piston systems including STAG, CMMG, ADAMS and Smith & Wesson to name a few. (Will not work with Osprey Systems Please see our Gas Piston "P" series models for compatibility with Osprey).
    • lifetime warranty

    100% made in the U.S.A.

    Learn More
  16. MCTAR-20XG2 : Two Piece Free Float Extended Carbine
    • Complete install in minutes, removal of delta ring is required
    • Four anti-rotation QD sockets for push button swivels
    • High quality 1913 mil-spec rails, T-marked for accessory location
    • Incredibly lightweight, extremely solid lock-up with monolithic type continuous top rail
    • Billet machined from 6061 aluminum and hard coat anodized
    • Carbine Length 12.5 inches Weight 14.6 oz.
    • Except for the Extended Carbine model, all other models are Piston compatible Works with most well known piston systems including STAG, CMMG, ADAMS and Smith & Wesson to name a few. (Will not work with Osprey Systems Please see our Gas Piston "P" series models for compatibility with Osprey).
    • includes lifetime warranty

    100% made in the U.S.A.

    Note: The MCTAR-20XG2 extended length carbine model will not work with gas piston systems.

    Learn More
  17. MCTAR-21G2 : GEN II Two Piece Free Float Mid Length
    • Complete install in minutes, removal of delta ring is required
    • Four anti-rotation QD sockets for push button swivels
    • High quality 1913 mil-spec rails, T-marked for accessory location
    • Incredibly lightweight, extremely solid lock-up with monolithic type continuous top rail
    • Billet machined from 6061 aluminum and hard coat anodized
    • Mid-Length, Length 9 inches Weight 11.3 oz.
    • Piston compatible Works with most well known piston systems including STAG, CMMG, ADAMS and Smith & Wesson to name a few. (Will not work with Osprey Systems Please see our Gas Piston "P" series models for compatibility with Osprey).
    • includes lifetime warranty

    100% made in the U.S.A.

    Learn More
  18. MCTAR-22G2 : Two Piece Free Float Forearm Full Length
    • Complete install in minutes, removal of delta ring is required
    • Four anti-rotation QD sockets for push button swivels
    • High quality 1913 mil-spec rails, T-marked for accessory location
    • Incredibly lightweight, extremely solid lock-up with monolithic type continuous top rail
    • Billet machined from 6061 aluminum and hard coat anodized
    • Rifle, Length 12.5 inches Weight 14.6 oz.
    • Except for the Extended Carbine model, all other models are Piston compatible Works with most well known piston systems including STAG, CMMG, ADAMS and Smith & Wesson to name a few. (Will not work with Osprey Systems Please see our Gas Piston "P" series models for compatibility with Osprey).
    • includes lifetime warranty

    100% made in the U.S.A.

    Learn More
  19. MCTAR-24G2 : Two Piece Free Float 10" Carbine Length
    • Complete install in minutes, removal of delta ring is required
    • Four anti-rotation QD sockets for push button swivels
    • High quality 1913 mil-spec rails, T-marked for accessory location
    • Incredibly lightweight, extremely solid lock-up with monolithic type continuous top rail
    • Billet machined from 6061 aluminum and hard coat anodized
    • Carbine, Length 10 inches Weight 11.9 oz.
    • Except for the Extended Carbine model, all other models are Piston compatible Works with most well known piston systems including STAG, CMMG, ADAMS and Smith & Wesson to name a few. (Will not work with Osprey Systems Please see our Gas Piston "P" series models for compatibility with Osprey).
    • includes lifetime warranty

    100% made in the U.S.A.

    Learn More
  20. MCTAR-30 : End Plate Adaptor - QD

    Work well in all types of configurations, including single point, two point or three point tactical slings.

    Easy, no gunsmith installation, no need for special tools or removal of buffer tube.

    Constructed of 6061 aluminum and hard coat anodized for a lifetime of service.

    Learn More
  21. MCTAR-30HD : Heavy Duty QD Sling Adaptor

    Work well in all types of configurations, including single point, two point or three point tactical slings
    Easy, no gunsmith installation, no need for special tools or removal of buffer tube
    Constructed of 6061 aluminum and hard coat anodized for a lifetime of service

    Learn More
  22. MCTAR-ERS : AR Series Emergency Rear Flip Up Sight

    A2 style dual aperture, fully protected from accidental damage
    Thick rugged pivot ears, twice as thick as the competition
    Made from 6061 aluminum, mil-spec hard coat anodized to stand up to the most extreme conditions
    Locking detent with double the locking surface, for maximum strength
    Lock detent button with stepped down turns, to provide a surface you can grab onto if your hands are muddy of wet
    Same style windage knob as on the standard M-16:

    • .65 MOA on M-4 type rifles / .49 MOA on A-4 type rifles

    includes lifetime warranty
    100% made in the U.S.A.

    Learn More
  23. MCTAR-FFG : Front Flip-Up Sight For Gas Block

    Uses standard A2 front sight post
    Super smooth ball bearing pivot detent automatically locks in the raised position with locking detent
    Constructed of 6061 aluminum, hard coat anodized for a lifetime of service
    Gas block model is for a gun with a railed gas block that is lower than the upper
    Rail height model is for mounting on gas blocks or handguards that are the same height as the upper
    Gas block mount model folds to front
    Rail mount model folds to rear

    Learn More
  24. MCTAR-FFR : Front Flip-Up Sight For Rails

    Uses standard A2 front sight post
    Super smooth ball bearing pivot detent automatically locks in the raised position with locking detent
    Constructed of 6061 aluminum, hard coat anodized for a lifetime of service
    Gas block model is for a gun with a railed gas block that is lower than the upper
    Rail height model is for mounting on gas blocks or handguards that are the same height as the upper
    Gas block mount model folds to front
    Rail mount model folds to rear

    Learn More
  25. MCTAR-GTB : AR Series Gas Tube Brush

    Anyone who has cleaned an AR-series rifle knows how hard it is to maintain and clean the gas tube, to ensure reliability.

    Midwest Industries has come up with an innovative, practical and cost effective solution: the MCT-AR-GTB.

    • Made from high quality materials
    • Use it again and again with great results
    • Works on 16 or 20 inch barrel rifles
    • Comes in a bag for buttstock storage
    • Goes down gas tube without kinking, unlike a pipe cleaner
    • Simply remove the brush from the bag, straighten the shank and feed the brush down the gas tube

    This brush takes the hassle out of cleaning this critical part of the rifle.

    Learn More
  26. MCTAR-LPG : Low Profile Gas Block  .750Dia

    Constructed from 4140 steel
    For .625, .750, .875 & .936 diameter barrels
    Low profile design will fit under most commercially available handguards

    Learn More
  27. MCTAR-LPG-.875 : MI- Low Profile Gas Block - For .875Dia Barrel

    Constructed from 4140 steel
    For .625, .750, .875 & .936 diameter barrels
    Low profile design will fit under most commercially available handguards

    Learn More
  28. MCTAR-LPG.625 : Low Profile Gas Block  .625 Dia

    Constructed from 4140 steel
    For .625, .750, .875 & .936 diameter barrels
    Low profile design will fit under most commercially available handguards

    Learn More
  29. MCTAR-LPG.936 : Low Profile Gas Block .936 Dia

    Constructed from 4140 steel
    For .625, .750, .875 & .936 diameter barrels
    Low profile design will fit under most commercially available handguards

    Learn More
  30. MCTAR-SPLP : Same Plain Low Profile Rear Sight

    Same Plane Low Profile Back Up Rear Sight
    Sits only .4375" when folded
    Extremely low profile dual aperture design
    Made from 6061 aluminum, mil-spec hard coat anodized for a lifetime of service
    Locking detent with large surface area for maximum strength
    Same ball detent battle proven design of #MCTAR-ERS
    Lock detent button with stepped down turns, to provide a surface you can grab onto if your hands are muddy or wet.
    Micro style windage knob featuring the same MOA adjustments as the standard M-16
    .65 MOA on M-4 type rifles
    .49 MOA on M Type rifles
    Lifetime warranty!
    100% made in U.S.A.

    Learn More
  31. MCTAR-TS : Sling Adaptor - Front Loop

    US Patent Number D508,726S
    Constructed of 6061 aluminum, hard coat anodized to provide a lifetime of service

    Learn More
  32. MCTAR-UHGB : Upper Height Gas Block

    Constructed from 4140 steel
    For .750 diameter barrels
    1913 Spec Rail machined to same height as A-4 uppers

    Learn More
  33. MI-1022SM : Ruger 10-22 Scope Mount

    Made to fit the Roger 10/22 receiver
    Uses factory mounting holes
    Hard coat anodized 6061 aluminum construction, for a lifetime of service
    Weight 1.6 ounces with screws
    Black or Silver

    Learn More
  34. MI-1022SM-S : Ruger 10-22 Scope Mount-Silver

    Made to fit the Ruger 10/22 receiver
    Uses factory mounting holes
    Hard coat anodized 6061 aluminum construction, for a lifetime of service
    Weight 1.6 ounces with screws
    Black or Silver

    Learn More
  35. MI-1022T1M : 10/22 Scope Mount T1M

    Features

    • Lightweight design with a low profile
    • Mounting screws and wrench included
    • Weight 2 oz installed
    • Construction from 6061 Aluminum, Type 3 Hard Coat Anodized for a lifetime of service
    • Fully dehorned for a non-abrasive, comfortable feel
    • MI Lifetime Warranty
    • 100% Made in America - Keeps America Working
    • US Patent Pending

     

    Learn More
  36. MI-11MR : 11 Slot M-Lok Rail Section

    6061 aluminum, hard coat anodized
    M-LOK(TM) mounting hardware included
    100% made in USA

    Learn More
  37. MI-17M : Carbine Length M-Lok Handguards-Black

    Two Piece Drop-In Handguard
    Incredibly Lightweight
    Supplied M-LOKT compatible Rail adds .5 oz
    MI-17M Carbine 5.0 oz
    Solid Lock up!
    Drop-in, no gunsmith installation, installs in minutes like factory handguards!
    Five anti rotation QD socket locations for QD sling swivels
    Monolithic type continuous top rail
    MIL-STD 1913 top rail
    Compatible with some gas piston systems
    Lifetime Warranty
    100% Made in the U.S.A.

    M-LOKT is a trademark of Magpul Industries Corp

    Learn More
  38. MI-1894-GRR : Marlin 1894 Ghost Ring Rail

    Midwest Industries 1 Piece Base, Black, Picatinny Rail, Marlin 1894

    • Product Type: 1 Piece Base
    • Finish/Color: Black
    • Fit: Marlin 336/1894/1985
    • Description: Picatinny Rail
    Learn More
  39. MI-1894-GRT1 : Marlin 1894 Ghost Ring T1
    • One Piece Picatinny Scope Rail
    • 5.0 Inches overall length
    • Machined to Mil Spec tolerances
    • Constructed from 6061 aluminum, hard coat anodized for a lifetime of service
    • Includes mounting screws
    • 100% Made in U.S.A. with a lifetime warranty
    • Also works with Henry 38/357, 44 Mag, and 45 Colt receivers
    • Weight 1.6oz
    Learn More
  40. MI-1894R : 1894 Marlin Top Rail
    • One Piece Picatinny Scope Rail
    • 5.0 Inches overall length
    • Machined to Mil Spec tolerances
    • Constructed from 6061 aluminum, hard coat anodized for a lifetime of service
    • Includes mounting screws
    • 100% Made in U.S.A. with a lifetime warranty
    • Also works with Henry 38/357, 44 Mag, and 45 Colt receivers
    • Weight 1.6oz
    Learn More
  41. MI-1895R : Marlin Rail
    Midwest Industries
    MI-1895R : Marlin Rail

    One Piece Picatinny Scope Rail
    6.0 Inches overall length
    Machined to mil spec tolerances
    Constructed from 6061 aluminum, hard coat anodized for a lifetime of service
    Includes mounting screws
    100% Made in U.S.A.
    lifetime warranty

    Learn More
  42. MI-18M : Mid-Length M-Lok Handguards-Black

    Two Piece Drop-In Handguard
    Incredibly Lightweight
    Supplied M-LOKT compatible Rail adds .5 oz
    MI-18M Mid-Length 6.6 oz
    Solid Lock up!
    Drop-in, no gunsmith installation, installs in minutes like factory handguards!
    Five anti rotation QD socket locations for QD sling swivels
    Monolithic type continuous top rail
    MIL-STD 1913 top rail
    Compatible with some gas piston systems
    Lifetime Warranty
    100% Made in the U.S.A.

    M-LOKT is a trademark of Magpul Industries Corp

    Learn More
View as List Grid

Items 1-50 of 394

Page
per page
Set Descending Direction
In Stock
*Estimated delivery could vary on some products.
© 2020 CAI is a registered trademark of Civil Arms Inc. -All rights reserved.