Wilson Combat

View as List Grid

Items 1-50 of 66

Page
per page
Set Descending Direction
In Stock
Shop By
  1. 100B : Checkered Frontstrap, Blue

    Our drop in checkered frontstraps provide a non-slip surface for quick follow-up shots, even with wet hands.

    This wraparound checkered frontstrap is an inexpensive user-installed substitute for hand checkering.

    The frontstrap is secured in place with your handgun's grip panels.

    Drop-in. Blued finish.

    Fits full-size 1911 pistols (Government size frame).

    Learn More
  2. 102B : Slide Release, .45 ACP, Blue

    "Factory Plus" Slide Stop, Glass Bead Blue, .45 ACP.

    Fits: All Codes in .45 ACP

    Pkg. Includes: Slide Stop

    This is a precision manufactured, heat treated slide stop, completely interchangeable with Colt or Military parts without fitting. Perfect for building up a frame kit.

    Learn More
  3. 102BS : Slide Release, .38 Super/9mm, Blue

    "Factory Plus" Slide Stop, Glass Bead Stainless Steel, .38 Super.

    Fits: All Codes in .38 Super

    Pkg. Includes: Slide Stop

    This is a precision manufactured, heat treated slide stop, completely interchangeable with Colt or Military parts without fitting. Perfect for building up a frame kit.

    Learn More
  4. 192B : Ambidextrous Thumb Safety, Tactical Levers, Blue

    Tactical Ambidextrous Thumb Safety, Polished Blue.

    Fits: A thru O Pkg. Includes: Safety

    NOTE: Specifically Designed for Concealed Carry The Tactical Ambidextrous Thumb Safety will allow your 1911 Auto to be operated with either the right or left hand.

    This is an essential feature for left handed shooters, but has many other uses including combat competition. Both levers are extended and serrated with the left side being slightly wider than the right. Minor fitting required.

    Learn More
  5. 192BBP : Ambidextrous Thumb Safety, Tactical Levers, Bullet Proof®, Blue

    Tactical Ambidextrous Thumb Safety, Tactical Levers, Bullet Proof®, Polished Blue.

    The Toughest Ambi Safety You Will Ever Find-Anywhere!

    • Billet Steel Construction
    • Precision CNC Machined for a Long-Lasting, Wobble-Free Fit
    • Unique Hammer Pin Holds the Right Side Lever Securely Without Using The Grips
    • Pre-Shaped and Contoured for a Perfect, Comfortable Feel
    • Fitting is required
    • available in blue and stainless
    Learn More
  6. 298B : Beavertail Grip Safety, High Ride, Blue

    The High Ride Beavertail Grip Safety will improve the comfort and controllability of your 1911 Auto.

    This is accomplished by allowing the shooting hand to be positioned closer to the plane of the bore while spreading the recoil over a broad rounded surface. The bottom of the High Ride Safety features our raised Posi-Release tab which assures positive grip safety disengagement while serving as a grip memory point each time you draw your pistol.

    The top of the High Ride Safety has a hammer pocket which makes the pistol more snag-free by allowing a commander or bobbed spur hammer to sit down in the beavertail when cocked.

    Frame modification required. Installation of a Wilson High Ride (#298) beavertail requires cutting the frame to fit the beavertail.

    Our beavertail fitting jig mounts to the hammer and thumb safety pin holes to serve as a filing guide to help prevent over cutting of the frame. Once this cut is made, only a few thousandths remain for final fitting to a perfect match.

    Complete instructions included on the use of the fitting jig and how to properly install a Wilson's beavertail grip safety.

    Learn More
  7. 298BBP : Beavertail Grip Safety, High Ride, Bullet Proof®, Blue

    The Bullet Proof ® version of our classic 1911 beavertail safety is machined from hardened bar stock steel without the flaws or inclusions that can plague many mass produced cast or molded inferior 1911 parts.

    The exclusive Wilson compound joint radius is easy to fit by hand and the modified grip safety arm allows easy disassembly.

    A pocketed rear tang for a recessed commander hammer and a raised rear tab for positive safety release will make this your preferred part for high end custom builds.

    Frame modification required.  Use our #402 fitting jig for best results.

    • Carbon Steel
    • Black Oxide Finish
    Learn More
  8. 299B : Hammer, Deluxe Commander, Bullet Proof®, Blue

    A quality hammer is an essential component of a fine trigger job.

    That is why Wilson Combat® hammers are manufactured from the best quality steel to keep that clean crisp trigger pull shot after shot. Considerable attention has been paid to the geometry of our hammers, particularly to the location of the strut pin hole which has been re-located to aid in obtaining a light trigger pull.

    Experience has shown that our advanced hammer design enhances reliability and the ability to consistently produce a crisp, yet safe trigger pull.

    All Wilson hammers have been narrowed to provide adequate slide/hammer clearance and some are skeletonized to improve lock time. It is worth noting that skeletonizing a hammer improves the speed that it travels, which in turn reduces lock time. It does not effect the trigger pull. When you build as many custom pistols as we do, you learn the value of a quality hammer. You can count on Wilson Combat® hammers.

    The rugged reliability of our Deluxe Commander Hammer has made it extremely popular with serious shooters. These hammers are skeletonized to provide a lightning fast lock time without sacrificing durability.

    The Deluxe Hammer features a narrow half cock notch similar to those found on the 70 series Colt hammers for maximum security.

    It's no wonder that this hammer is one of the best selling hammers made.

    Minor fitting required.

    Learn More
  9. 314C : Sear, Value Line

    Value Line Sear.

    Fits: A thru O Pkg. Includes: Sear.

    NOTE: For best results, we recommend using this Sear in conjunction with #455B Value Line Hammer. Our new Value Line Sear offers you reliable performance at a very affordable price.

    They're manufactured using the MIM (metal injection molding) process which produces a quality product at a much lower price than possible with conventional manufacturing methods.

    Learn More
  10. 31B : Magazine Release, Extended, Blue

    A fumbled magazine change can mean the difference between a win and a loss in any speed shoot competition. That's why most competitive shooters prefer our Extended Magazine Release with its wide checkered button for quick magazine changes with minimal movement.

    We do not recommend an extended magazine release on carry pistols.

    For shooters that want to use their carry gun for competition, the large button on our extended magazine release can be removed with an allen wrench (included) leaving a stock dimension button that is ideal for carry purposes.

    NOTE: Catch lock & spring sold separately, Std. 1911 Replacement Parts.

    Learn More
  11. 31TBP : Magazine Release, Tactical, Bullet Proof®, Blue

    Wilson Combat re-designed and flawlessly CNC machined from hardened, billet tool steel, the button of our Bullet Proof® Tactical Magazine Release is slightly extended 1/16" over a stock part for fast, smooth operation and is equally suited for competition or carry.

    Perfectly checkered at 30 LPI for non-slip activation and engineered to maximum drop-in tolerances, this easy upgrade will improve the feel and performance of any 1911 pattern pistol.

    Minor fitting may be required. Available in chromoly (blued) or stainless steel.

    Magazine catch lock and spring not included.

    • CNC Machined from Hardened Billet Tool Steel
    • Slightly Extended 1/16" for Smooth Operation
    • Equally Suited for Competition or Carry
    • Perfectly Checkered at 30 LPI for Non-Slip Activation
    • Engineered to Maximum Drop-In Tolerances
    • Magazine Catch Lock and Spring Not Included
    Learn More
  12. 34 : Extended Ejector, .45 ACP, Full-Size, Blue

    A combat pistol must reliably eject spent cases every time.

    Our Extended Combat Ejectors are designed to give optimal case clearance and endure the constant pounding of even the hottest loads.

    These Ejectors are fully machined from 4130 bar stock and heat treated for maximum durability.

    If your pistol must work every time, you can't afford to be without an extended ejector.

    Learn More
  13. 34E : Extended Ejector, .45 ACP, Full-Size/Commander/Compact/Officer's, Blue

    A combat pistol must reliably eject spent cases every time.

    Our Extended Combat Ejectors are designed to give optimal case clearance and endure the constant pounding of even the hottest loads.

    These Ejectors are fully machined from 4130 bar stock and heat treated for maximum durability.

    If your pistol must work every time, you can't afford to be without an extended ejector.

    Learn More
  14. 34P : Extended Ejector, .38 Super/9mm, Full-Size, Blue

    A combat pistol must reliably eject spent cases every time.

    Our Extended Combat Ejectors are designed to give optimal case clearance and endure the constant pounding of even the hottest loads.

    These Ejectors are fully machined from 4130 bar stock and heat treated for maximum durability.

    If your pistol must work every time, you can't afford to be without an extended ejector.

    Learn More
  15. 34S : Extended Ejector, .38 Super/9mm/.45 ACP, Colt Government/Commander/Officer's, Blue

    A combat pistol must reliably eject spent cases every time.

    Our Extended Combat Ejectors are designed to give optimal case clearance and endure the constant pounding of even the hottest loads.

    These Ejectors are fully machined from 4130 bar stock and heat treated for maximum durability.

    If your pistol must work every time, you can't afford to be without an extended ejector.

    Learn More
  16. 34SS : Extended Ejector, .45 ACP, Full-Size, SS

    A combat pistol must reliably eject spent cases every time.

    Our Extended Combat Ejectors are designed to give optimal case clearance and endure the constant pounding of even the hottest loads.

    These Ejectors are fully machined from 4130 bar stock and heat treated for maximum durability.

    If your pistol must work every time, you can't afford to be without an extended ejector.

    Learn More
  17. 399B,70 : Firing Pin Stop, 70 Series, Bullet Proof®, Blue

    Most firing pin stops are cheap, mass produced, stamped parts, but they're not Bullet Proof either.

    A Bullet Proof firing pin stop is fully machined from super tough bar stock steel with great care to radius all corners resulting in a part that is many times stronger than a standard firing pin stop.

    A quality firing pin stop should fit snuggly in place, therefore this part does require minor fitting to your particular pistol for a perfect fit.

    Black oxide finished.

    Learn More
  18. 399B,70SQ : Firing Pin Stop, 70 Series, Square Bottom, Bullet Proof®, Blue

    Slightly oversize, this rugged, tool steel firing pin stop will prevent excessive extractor movement and is left square on the bottom to help tune your slide's recoil to your preference.

    Use a small bevel on the face of the stop for heavier loads, more bevel if you tend to shoot lighter loads.

    This part will require light fitting.  A fitted firing pin stop is a must for any 1911 spare parts kit.

    Series 70 will fit all Wilson, USGI or Colt/Springfield/Kimber without a Series 80 style firing pin safety.

    Black oxide finished.

    Learn More
  19. 399B,80 : Firing Pin Stop, 80 Series, Bullet Proof®, Blue

    Most firing pin stops are cheap, mass produced, stamped parts, but they're not Bullet Proof either.

    A Bullet Proof firing pin stop is fully machined from super tough bar stock steel with great care to radius all corners resulting in a part that is many times stronger than a standard firing pin stop.

    A quality firing pin stop should fit snuggly in place, therefore this part does require minor fitting to your particular pistol for a perfect fit.

    Black oxide finished.

    Learn More
  20. 405B : Magazine Release, Oversize, Blue

    This extra large magazine release is ideal for shooters with very small hands or competition shooters looking for the edge at a match when making magazine changes.

    The large checkered paddle can't be missed under pressure.

    Not recommended for carry or tactical pistols.

    Drop in fit to most guns, some grips will require inletting.

    Black oxide magazine catch with stainless steel checkered paddle.

    Learn More
  21. 414B : Slide Release, .45 ACP, Bullet Proof®, Blue

    Slide Stop, Bullet Proof, .45 ACP, Blue.

    Fits: All Codes in .45 ACP Pkg.

    Includes: Slide Stop

    The slide stop takes an unbelievable pounding in a 1911 Auto making it vulnerable to breakage & wear.

    Bullet Proof® Slide Stops are fully machined from solid bar stock with extra metal left in critical areas for added durability.

    But the real key to a Bullet Proof® Slide Stop is the material. After considerable research and field testing, we have found what we believe to be the finest slide stop steel possible which when properly heat treated produces a truly Bullet Proof® Slide Stop.

    As if this wasn't enough, Bullet Proof® Slide Stops have a built in detent, serrated top and maximum tolerance shaft.

    This is a drop in part requiring no fitting in properly manufactured 1911 Autos.

    Black Oxide finish.

    Learn More
  22. 414BS : Slide Release, .38 Super/9mm, Bullet Proof®, Blue

    Slide Stop, Bullet Proof, 38 Super/9MM, Blue.

    Fits: All Codes in 38 Super/9MM

    Pkg. Includes: Slide Stop

    The slide stop takes an unbelievable pounding in a 1911 Auto making it vulnerable to breakage & wear.

    Bullet Proof® Slide Stops are fully machined from solid bar stock with extra metal left in critical areas for added durability.

    But the real key to a Bullet Proof® Slide Stop is the material. After considerable research and field testing, we have found what we believe to be the finest slide stop steel possible which when properly heat treated produces a truly Bullet Proof® Slide Stop.

    As if this wasn't enough, Bullet Proof® Slide Stops have a built in detent, serrated top and maximum tolerance shaft.

    This is a drop in part requiring no fitting in properly manufactured 1911 Autos.

    Black Oxide finish.

    Learn More
  23. 415-70 : Extractor, 70 Series, .45 ACP, Bullet Proof®, Blue

    Extractor, 70 Series, .45 ACP, Bullet Proof®, Black Oxide finish.

    When it comes to 1911 reliability, the extractor is the most important component part of your 1911 handgun.

    A well-designed, properly tuned extractor ensures that your pistol feeds, extracts and ejects reliably every time.

    All Wilson Combat Bullet Proof® Extractors are machined from solid bar stock alloy steel and then specially heat treated for long lasting tension and toughness to resist chipping or breakage.

    Wilson Bullet Proof® extractors are the choice of professional gunsmiths and will hold tension longer and resist damage better than any other extractor on the market.

    All of our 1911 extractors require minimal fitting for proper function and often will drop in some guns with only final tensioning required.  Used in conjunction with a Wilson Combat firing pin stop you can optimize extractor function for any 1911 pistol.

    • Fully Machined from S7 shockproof tool steel with a tensile strength of 275,000 PSI
    • Optimized hook design for maximum strength and case rim contact
    • Hook location tolerances held to +/- .001"
    • Radiused corners for extended life and smooth feeding
    • Enhanced design holds tension longer over factory part many times over
    • Heat treated to optimum hardness and cryogenically treated
    • Guaranteed for life against breakage or we will replace at no cost to you

    About S7 Tool Steel:

    A Wilson exclusive, S7 is a shock resistant "non stainless" tool steel with excellent toughness and high strength, along with good wear resistance. It has maximum shock resistance and high compression strength, which gives it good deformation resistance in use, while retaining good toughness to resist chipping and breaking.

    Typical applications for S7 tool steel are punches, chisels, blanking dies, forming dies and concrete breakers.

    Series 70 vs Series 80 1911 Extractors:

    The difference between Series 70 and Series 80 extractors is a plunger retainer stud machined into the Series 80 extractor.

    This retainer stud holds the firing pin safety plunger that is visible next to the disconnector rail in place on Colt-style Series 80 slides.

    All extractors which are designed to work in a Series 80 1911 will also work in all Series 70 guns, however extractors designed for Series 70 guns lack the machined cut which allows the firing pin lock plunger to be installed and therefore cannot be used in Series 80 guns.

    Kimber series II guns can use either a 70 series or 80 series.

    All Springfield Armory 1911 pistols are 70 series.

    Learn More
  24. 415-80 : Extractor, 80 Series, .45 ACP, Bullet Proof®, Blue

    Extractor, 80 Series, .45 ACP, Bullet Proof®, Black Oxide finish.

    When it comes to 1911 reliability, the extractor is the most important component part of your 1911 handgun.

    A well-designed, properly tuned extractor ensures that your pistol feeds, extracts and ejects reliably every time.

    All Wilson Combat Bullet Proof® Extractors are machined from solid bar stock alloy steel and then specially heat treated for long lasting tension and toughness to resist chipping or breakage.

    Wilson Bullet Proof® extractors are the choice of professional gunsmiths and will hold tension longer and resist damage better than any other extractor on the market.

    All of our 1911 extractors require minimal fitting for proper function and often will drop in some guns with only final tensioning required.  Used in conjunction with a Wilson Combat firing pin stop you can optimize extractor function for any 1911 pistol.

    • Fully Machined from S7 shockproof tool steel with a tensile strength of 275,000 PSI
    • Optimized hook design for maximum strength and case rim contact
    • Hook location tolerances held to +/- .001"
    • Radiused corners for extended life and smooth feeding
    • Enhanced design holds tension longer over factory part many times over
    • Heat treated to optimum hardness and cryogenically treated
    • Guaranteed for life against breakage or we will replace at no cost to you

    About S7 Tool Steel:

    A Wilson exclusive, S7 is a shock resistant "non stainless" tool steel with excellent toughness and high strength, along with good wear resistance. It has maximum shock resistance and high compression strength, which gives it good deformation resistance in use, while retaining good toughness to resist chipping and breaking.

    Typical applications for S7 tool steel are punches, chisels, blanking dies, forming dies and concrete breakers.

    Series 70 vs Series 80 1911 Extractors:

    The difference between Series 70 and Series 80 extractors is a plunger retainer stud machined into the Series 80 extractor.

    This retainer stud holds the firing pin safety plunger that is visible next to the disconnector rail in place on Colt-style Series 80 slides.

    All extractors which are designed to work in a Series 80 1911 will also work in all Series 70 guns, however extractors designed for Series 70 guns lack the machined cut which allows the firing pin lock plunger to be installed and therefore cannot be used in Series 80 guns.

    Kimber series II guns can use either a 70 series or 80 series.

    All Springfield Armory 1911 pistols are 70 series.

    Learn More
  25. 415-S70 : Extractor, 70 Series, .38 Super/9mm, Bullet Proof®, Blue

    Extractor, 70 Series, .38 Super/9mm, Bullet Proof®, Black Oxide finish.

    When it comes to 1911 reliability, the extractor is the most important component part of your 1911 handgun.

    A well-designed, properly tuned extractor ensures that your pistol feeds, extracts and ejects reliably every time.

    All Wilson Combat Bullet Proof® Extractors are machined from solid bar stock alloy steel and then specially heat treated for long lasting tension and toughness to resist chipping or breakage.

    Wilson Bullet Proof® extractors are the choice of professional gunsmiths and will hold tension longer and resist damage better than any other extractor on the market.

    All of our 1911 extractors require minimal fitting for proper function and often will drop in some guns with only final tensioning required. Used in conjunction with a Wilson Combat firing pin stop you can optimize extractor function for any 1911 pistol.

    • Fully Machined from S7 shockproof tool steel with a tensile strength of 275,000 PSI
    • Optimized hook design for maximum strength and case rim contact
    • Hook location tolerances held to +/- .001"
    • Radiused corners for extended life and smooth feeding
    • Enhanced design holds tension longer over factory part many times over
    • Heat treated to optimum hardness and cryogenically treated
    • Guaranteed for life against breakage or we will replace at no cost to you

    About S7 Tool Steel:

    A Wilson exclusive, S7 is a shock resistant "non stainless" tool steel with excellent toughness and high strength, along with good wear resistance. It has maximum shock resistance and high compression strength, which gives it good deformation resistance in use, while retaining good toughness to resist chipping and breaking.

    Typical applications for S7 tool steel are punches, chisels, blanking dies, forming dies and concrete breakers.

    Series 70 vs Series 80 1911 Extractors:

    The difference between Series 70 and Series 80 extractors is a plunger retainer stud machined into the Series 80 extractor.

    This retainer stud holds the firing pin safety plunger that is visible next to the disconnector rail in place on Colt-style Series 80 slides.

    All extractors which are designed to work in a Series 80 1911 will also work in all Series 70 guns, however extractors designed for Series 70 guns lack the machined cut which allows the firing pin lock plunger to be installed and therefore cannot be used in Series 80 guns.

    Kimber series II guns can use either a 70 series or 80 series.

    All Springfield Armory 1911 pistols are 70 series.

    Learn More
  26. 423B : Ambidextrous Thumb Safety, High Ride, Blue

    Safety, Ambidextrous Thumb, Black Oxide finish.

    Fits: A thru O

    Pkg. Includes: Safety The High Ride Ambidextrous Thumb Safety provides a comfortable thumb rest for shooters who prefer to shoot with a high thumb. Both sides of this safety are extended, wide and angled downward for greatly enhanced shooter comfort, while allowing rapid action of the safety.

    This is also an excellent choice for lefties looking for a slightly wider lever on the right side of the gun.

    Learn More
  27. 429BC : Beavertail Grip Safety, Drop-In, Commander, Blue

    Now you can have a high ride beavertail grip safety on your 1911 pistol without modifying the frame.

    • Better Control of Your Pistol
    • Eliminates Discomfort and Hammer Bite
    • Return Your Pistol to Stock Condition by Simply Re-Installing the Factory Part
    • Designed to Work with a Commander Style Hammer or a Bobbed Spur Hammer
    • Fits Colt Style 1911 Frames

    Our drop-in beavertail grip safety provides better control of your pistol while eliminating the discomfort and hammer bite that are possible with stock grip safeties.

    To return your gun to stock condition, simply re-install the factory part. The drop-in safety is designed to work with a commander style hammer or a bobbed spur hammer.

    Due to variations from one pistol to the next, slight modifications to the beavertail's trigger engagement area may be required for proper operation.

    Compatible with the following pistols:

    • Colt Commander Model
    • Colt Officer's Model
    • Colt Enhanced Government Model
    • Colt Enhanced Gold Cup
    Learn More
  28. 429BG : Beavertail Grip Safety, Drop-In, Government, Blue

    Now you can have a high ride beavertail grip safety on your 1911 pistol without modifying the frame.

    Better Control of Your Pistol

    Eliminates Discomfort and Hammer Bite

    Return Your Pistol to Stock Condition by Simply Re-Installing the Factory Part

    Designed to Work with a Commander Style Hammer or a Bobbed Spur Hammer

    Fits Colt Style 1911 Frames

    Our drop-in beavertail grip safety provides better control of your pistol while eliminating the discomfort and hammer bite that are possible with stock grip safeties.

    To return your gun to stock condition, simply re-install the factory part. The drop-in safety is designed to work with a commander style hammer or a bobbed spur hammer.

    Due to variations from one pistol to the next, slight modifications to the beavertail's trigger engagement area may be required for proper operation.

    Compatible with the following pistols:

    • Auto Ordnance 1911A1
    • Auto Ordnance Pit Bull
    • Colt 1991A1
    • Colt Government Model
    • Colt Gold Cup
    • Ithaca 1911A1
    • Military Issue 1911A1
    • Norinco 1911
    • Para-Ordnance GI Expert
    • Para-Ordnance P-12
    • Para-Ordnance P-13
    • Para-Ordnance P-14
    • Remington R1
    • Rock Island Armory Full-Size 1911
    • Rock River 1911
    • Springfield Armory Mil-Spec 1911
       
    Learn More
  29. 455B : Hammer, Value Line, Blue

    A quality hammer is an essential component of a fine trigger job.

    That is why Wilson Combat® hammers are manufactured from the best quality steel to keep that clean crisp trigger pull shot after shot.

    Considerable attention has been paid to the geometry of our hammers, particularly to the location of the strut pin hole which has been re-located to aid in obtaining a light trigger pull.

    Experience has shown that our advanced hammer design enhances reliability and the ability to consistently produce a crisp, yet safe trigger pull.

    All Wilson hammers have been narrowed to provide adequate slide/hammer clearance and some are skeletonized to improve lock time.

    It is worth noting that skeletonizing a hammer improves the speed that it travels, which in turn reduces lock time. It does not effect the trigger pull.

    When you build as many custom pistols as we do, you learn the value of a quality hammer. You can count on Wilson Combat® hammers.

    Our Value Line Speed Hammer offers you a reliable performance at a very affordable price.

    With cosmetics basically identical to our deluxe fully machined #337B Ultralight hammer, it has a real custom look too.

    They're manufactured using the MIM (metal injection molding) process which produces a quality product at a much lower price than possible with conventional manufacturing methods.

    Note: For best results, we recommend using this Hammer in conjunction with #314C Value Line Sear.

    Learn More
  30. 458B : Plunger Tube, Bullet Proof®, Blue

    Our Bullet Proof Plunger Tube is machined from hardened solid bar stock and designed for a long-lasting, rigid installation in any 1911 pistol.

    Gunsmith installation required.

    Learn More
  31. 563B : Beavertail Grip Safety, Concealment, Bullet Proof®, Blue

    This minimized, Bullet Proof ® version of our classic beavertail safety is machined from hardened bar stock carbon steel without the flaws or inclusions that can plague many mass produced cast or molded inferior 1911 parts.

    The exclusive Wilson compound joint radius is easy to fit by hand and the modified grip safety arm allows easy disassembly.

    The minimized, sculpted "Concealment" rear grip tang and a raised rear palm swell for positive grip safety release will make this your preferred part for high-end custom builds where overall compactness is a priority.

    Frame modification required.

    Use our #402 fitting jig for best results.

    Note: The smaller tang profile of this safety requires the use of a sub-compact hammer like our #337BC or #337SC

    • Blued Finish
    Learn More
  32. 566B : Recoil Spring Plug, Ringed Cap, Bullet Proof®, Blue

    Our Bullet-Proof Recoil Spring Plug is precision CNC machined from 316 stainless steel bar stock for maximum durability.

    The end of the plug features concentric rings for a sleek look that the bushing / bushing wrench will not mar during assembly and/or disassembly.

    Recoil Spring Plugs are easy to lose during disassembly and your gun won't run without one, so it's always good to have a spare on hand. Blued finish.

    Learn More
  33. 584B : Reverse Plug, Full-Size, Supported for Bull Barrel, Closed End, Blue

    Reverse Plug, Full-Size, Supported for Bull Barrel.

    The 584 Reverse plug is machined from solid stainless bar stock and unlike most reverse plugs is designed to fully support your 5" tapered cone barrel when in battery.

    This item has a collar-style rear profile and will require gunsmith fitting.

    Blued finish.

    The closed end is perfect for GI-style guide rods.

    Learn More
  34. 585B : Reverse Plug, Full-Size, Supported for Bull Barrel, Open End, Blue

    Reverse Plug, Full-Size, Supported for Bull Barrel, Open End.

    The 585 Reverse plug is machined from solid stainless bar stock and unlike most reverse plugs is designed to fully support your 5" tapered cone barrel when in battery.

    Blued finish.

    This item has a collar-style rear profile and will require gunsmith fitting.

    The open end is a perfect match for full length guide rods.

    Learn More
  35. 587B : Recoil Spring Plug (Long), Ringed Cap, Bullet Proof®, Blue

    Our Bullet-Proof Recoil Spring Plug is precision CNC machined from carbon steel bar stock for maximum durability.

    The end of the plug features concentric rings for a sleek look that the bushing / bushing wrench will not mar during assembly and/or disassembly.

    Recoil Spring Plugs are easy to lose during disassembly and your gun won't run without one, so it's always good to have a spare on hand.

    Matte oxide/blued finish.

    • .030" Longer for Use with #588 Bullet Proof® Barrel Bushing
    Learn More
  36. 613B : Semi-Extended Slide Release, .45 ACP, Bullet Proof®, Blue

    For shooters who have a hard time hitting the standard size slide stop we have developed a semi-extended, fully machined Bullet Proof® slide stop.

    This extended lever design is easy to hit under stress or when wearing gloves.

    The pad is the same width as the standard Bullet Proof slide stop® and is appropriate for competition or hard-use, tactical 1911 handguns.

    The slide stop takes an unbelievable pounding in a 1911 Auto making it vulnerable to breakage & wear.

    Bullet Proof® Slide Stops are fully machined from solid bar stock with extra metal left in critical areas for added durability.

    The key to a Bullet Proof® Slide Stop is the material.

    After considerable research and field testing, we have found what we believe to be the finest slide stop steel possible which when properly heat treated produces a truly Bullet Proof® Slide Stop.

    As if this wasn't enough, Bullet Proof® Slide Stops have a built in detent, serrated top and maximum tolerance shaft.

    This is a drop in part requiring little to no fitting in properly manufactured 1911 Autos.

    • Matte Black oxide finish.
    • Fits: All Codes in .45 ACP
    • Pkg. Includes: Slide Stop
    Learn More
  37. 613BS : Semi-Extended Slide Release, .38 Super/9mm, Bullet Proof, Blue

    For shooters who have a hard time hitting the standard size slide stop we have developed a semi-extended, fully machined Bullet Proof® slide stop.

    This extended lever design is easy to hit under stress or when wearing gloves.

    The pad is the same width as the standard Bullet Proof slide stop® and is appropriate for competition or hard-use, tactical 1911 handguns.

    The slide stop takes an unbelievable pounding in a 1911 Auto making it vulnerable to breakage & wear.

    Bullet Proof® Slide Stops are fully machined from solid bar stock with extra metal left in critical areas for added durability.

    The key to a Bullet Proof® Slide Stop is the material.

    After considerable research and field testing, we have found what we believe to be the finest slide stop steel possible which when properly heat treated produces a truly Bullet Proof® Slide Stop.

    As if this wasn't enough, Bullet Proof® Slide Stops have a built in detent, serrated top and maximum tolerance shaft.

    This is a drop in part requiring little to no fitting in properly manufactured 1911 Autos.

    • Matte Black oxide finish.
    • Fits: All Codes in 38 Super/9mm
    • Pkg. Includes: Slide Stop
    Learn More
  38. 616B : Recoil Spring Plug, Commander, Ringed Cap, Bullet Proof®, Blue

    Our Bullet Proof® Recoil Spring Plug is precision CNC machined from carbon steel bar stock for maximum durability.

    The end of the plug is left un-checkered for a sleek look that the bushing / bushing wrench will not mar during assembly and/or disassembly.

    Recoil Spring Plugs are easy to lose during disassembly and your gun won't run without one, so it's always good to have a spare on hand.

    • Falt Cap
    • Matte black oxide/blued finish
    Learn More
  39. 617B : Recoil Spring Plug (Long), Commander, Flat Cap, Bullet Proof®, Blue

    Our Bullet Proof® Recoil Spring Plug is precision CNC machined from carbon steel bar stock for maximum durability.

    The end of the plug is left un-checkered for a sleek look that the bushing / bushing wrench will not mar during assembly and/or disassembly.

    Recoil Spring Plugs are easy to lose during disassembly and your gun won't run without one, so it's always good to have a spare on hand.

    • Falt Cap
    • .030" Longer for Use with Bullet Proof® (Thick) Barrel Bushing
    • Matte black oxide/blued finish
    Learn More
  40. 618B : Recoil Spring Plug (Long), Commander, Ringed Cap, Bullet Proof®, Blue

    Our Bullet Proof® Recoil Spring Plug is precision CNC machined from carbon steel bar stock for maximum durability.

    The end of the plug is left un-checkered for a sleek look that the bushing / bushing wrench will not mar during assembly and/or disassembly.

    Recoil Spring Plugs are easy to lose during disassembly and your gun won't run without one, so it's always good to have a spare on hand.

    • Ringed Cap
    • .030" Longer for Use with Bullet Proof® (Thick) Barrel Bushing
    • Matte black oxide/blued finish
    Learn More
  41. 620BP : Ambidextrous Thumb Safety, Wide Levers, Bulletproof®, Blue

    The Toughest Ambi Safety You Will Ever Find-Anywhere!

    • Wide Levers
    • Billet Steel Construction
    • Precision CNC Machined for a Long-Lasting, Wobble-Free Fit
    • Unique Hammer Pin Holds the Right Side Lever Securely Without Using The Grips
    • Pre-Shaped and Contoured for a Perfect, Comfortable Feel

    Comfortable feel right out of the package.

    Fitting is required, available in blue and stainless.

    Learn More
  42. 635 : Wilson Combat Short Reach Steel Trigger | Beretta 92/96

    The addition of the Wilson Combat® short reach trigger is an upgrade to the current factory standard polymer trigger and reduces trigger reach.

    Ideal for shooters of all hand sizes.

    • CNC machined from 4140 heat treated steel
    • Machined to close tolerances for a drop-in fit
    • Shorter trigger reach is ideal for shooters of all hand sizes
    • Black Armor-Tuff® finish

    Note: These will fit the standard 92 and 96 pistols, 92 and 96 A1 and the 90-TWO, 92/96 Centurions, Compact L's and Compact Type M's.

    Learn More
  43. 636 : Custom Carry Lo-Profile (Single) Lever Safety / De-Cocker | Beretta 92/96 F/FS Model

    Wilson Combat Beretta® 92/96 Lo-Profile Safety/De-cocking Lever.

    • CNC machined from 4140 heat treated steel
    • Drop-in fit
    • Low profile left side only lever ideal for tactical or concealed carry use
    • No right side lever to catch on clothing or get accidentally activated
    • Black Armor-Tuff finish
    Learn More
  44. 637 : Wilson Combat Standard (Single) Lever De-Cocker for G Conversion | Beretta 92/96

    Wilson Combat Beretta® 92/96 Custom Carry Lever De-Cocker for G Conversion.

    • CNC machined from 4140 heat treated steel
    • Standard profile left side only lever ideal for tactical or concealed carry use
    • No right side lever to catch on clothing or get accidentally activated
    • Black Armor-Tuff finish
    • Includes detent plunger and spring

    Note: Major Gunsmithing and Slide Modification Required

    Minor Fitting Required when Installing on a Current G Model.

    This Part Will NOT Work with the M9A3 Beretta Model.

    Learn More
  45. 638 : Wilson Combat Oversize Steel Magazine Release | Beretta 92/96

    Wilson Combat Beretta® 92/96 Oversize Magazine Release.

    Our oversize Beretta® 92/96 magazine release makes it easy to depress your magazine button under stress.

    Useful for shooters with all hand sizes.

    No fitting required.

    • Allows shooters with all hand sizes to release the magazine with little or no shift in grip
    • CNC machined from 4140 heat treated steel
    • Oversize pad
    • Black Armor Tuff finish
    • Not ambidextrous, for right hand shooter on left side of pistol

    Note: Does not include bushings and spring. Requires re-use of your bushings and spring.

    Learn More
  46. 674 : Wilson Combat Standard (Single) Lever Safety / De-Cocker | Beretta 92/96 F/FS Model

    Wilson Combat Beretta® 92/96 Standard Safety/De-cocking Lever.

    • CNC machined from 4140 heat treated steel
    • Drop-in fit
    • Standard profile left side only lever ideal for tactical or concealed carry use
    • No right side lever to catch on clothing or get accidentally activated
    • Black Armor-Tuff finish
    Learn More
  47. R10,38 : Firing Pin, .38 Super/9mm, 70 or 80 Series

    These 1911 Auto parts meet or exceed factory specifications.

    If you're building a gun, or wish to bring your gun back to spec., these parts will provide exceptional service.

    Made to the upper end of tip diameter specifications (.0685" to .0695") to improve ignition and prevent primer flow from high pressure cartridges.

    May require light polishing to fit some slides.

    Learn More
  48. R15 : Magazine Release, Blue

    These 1911 Auto parts meet or exceed factory specifications.

    If you're building a gun, or wish to bring your gun back to spec., these parts will provide exceptional service.

    Magazine Release, Blued Finish.

    Learn More
  49. R15B : Magazine Catch Lock, Blue

    These 1911 Auto parts meet or exceed factory specifications.

    If you're building a gun, or wish to bring your gun back to spec., these parts will provide exceptional service.

    Magazine Catch Lock, Blued Finish.

    Learn More
  50. R16B : Mainspring Cap, Blue

    These 1911 Auto parts meet or exceed factory specifications.

    If you're building a gun, or wish to bring your gun back to spec., these parts will provide exceptional service.

    Mainspring Cap, Blued Finish.

    Learn More
View as List Grid

Items 1-50 of 66

Page
per page
Set Descending Direction
In Stock
*Estimated delivery could vary on some products.
© 2020 CAI is a registered trademark of Civil Arms Inc. -All rights reserved.