Firearm Maintenance

Shop By
View as List Grid

43 Items

per page
Set Descending Direction
In Stock
  1. 556-FIELD : Headspace gauge field 556

    This high quality machined steel gauge determines overly excessive headspace in the barrel's firing chamber. This can indicate firing chamber or bolt wear.

    If a rifle's bolt closes on a FIELD gauge, that means that the chamber is oversized and the rifle should not be fired. The barrel should be replaced. The Gauge is etched with caliber marking, and "FIELD" designation. Machined to SAAMI specifications.

    Made in the USA.

    Learn More
  2. 556-GO : Headspace gauge - go 5.56

    This high quality machined steel gauge measures headspace in the barrel's firing chamber. It is also used to indicate proper chamber depth or an oversized bolt.

    Etched with caliber marking and "GO" designation. Machined to SAAMI specification.

    Made in USA.

    Learn More
  3. 556-NOGO : Headspace gauge no go 556

    This high quality machined steel gauge determines excessive headspace in the barrel's firing chamber, as well as too much chamber depth, or an undersized bolt.

    A bolt that closes on a No-Go gauge means that a chamber is close to the maximum chamber size. Etched with caliber marking, and "NO GO" designation. Machined to SAAMI specifications.

    Made in the USA.

    Learn More
  4. BLOCK-BENCH : Bench block for front site pin removal/installation

    Machined from a solid block of nylon, this durable bench block will facilitate AR15/M16 front sight removal - providing a solid support for taper pin removal/installation Also works with rail gas blocks. Additionally, there is a "shelf" machined into one end with a hole in it that will support the "ear" of an AR15/M16 lower receiver when installing or removing the trigger guard. Works universally with any AR15/M16 barrel or lower receiver. Made in USA.

    Sku: block-bench

    Learn More
  5. BLOCK-LOWER-223 : Block vice for lower receiver for 223/556

    This durable, multi-purpose and essential tool clamps into a bench vise, so that you can then slide the lower receiver magazine well down onto the upper portion. This provides a stable platform to perform a variety of repairs or installations on the AR lower receiver. CNC cut NO-MAR® polymer construction protects your receiver's finish. Multi-Lock® feature locks receiver in any position - install through top or bottom of Magazine Well. Works with the Upper Receiver installed or removed, and provides access to trigger guard, pistol grip & buffer tube to make trigger & safety installations much easier. Works in any size bench vise, and the built in support puts no strain on your magazine release. Universal fit works with any AR15 lower receiver. Made in USA.

    Sku: block-lower-223

    Learn More
  6. BRUSH-BORE-223 : Brush bore 223

    This quality Bore Brush for .223 / 5.56mm caliber barrels features the finest phosphor bronze bristles on a looped and wound shank, and is threaded 8/32 to fit most commercial .22 cal. cleaning rods. Keep your rifle at its most accurate
    with a clean bore!

    Sku: brush-bore-223

    Learn More
  7. BRUSH-CHAMBER-223 : Brush chamber 223

    This original mil spec quality Chamber Brush is threaded 8/36 to fit standard rods. Bronze bristles scrub out the chamber while the longer, stainless steel tufts clean the locking lug recesses - all absolutely necessary to maintain the reliability and functionality of your AR rifle.

    Sku: brush-chamber-223

    Learn More
  8. CARBONSCRAPER : Bolt and Carrier carbon scraper

    Here's the handiest little AR Bolt & Carrier care tool you can keep in your range bag. The Combat Application Tools C.A.T. M-4 Tool allows the operator to clean the weapon and restore the bolt and carrier group to tactical tolerance in a matter of minutes - in the field, with gloved hands, and in low light conditions if necessary. This tool was designed to simplify weapons maintenance in the field, or at the range, for Soldiers and serious M4 and AR-15 shooters from all backgrounds. 3.5" long - 1.4oz. - investment cast from 300 series stainless steel. The "forked" end is a bolt cleaning chamber CNC machined to precisely fit a mil-spec bolt. The circular indent with the cross shape will clean carbon from the firing pin shoulder and the hex opening is designed hold the common hexagonal bits. The "blade shaped" end will quickly scrape out the bolt carrier, and the slot just ahead of it is for inserting a patch to help remove all traces of carbon buildup. Made in the USA.

    Sku: carbonscraper

    Learn More
  9. CARBONSCRAPER-762 : Bolt and carrier carbon scraper - 762

    This tool allows the operator to clean the weapon and restore the bolt and carrier group to "tactical tolerance" in a matter of minutes. This investment-cast 300-series stainless steel scraping tool removes carbon build-up from the bolt, bolt carrier, and firing pin flange, and is small enough to stow conveniently in your shooting bag or gun case. It is designed for AR-10's with a .308 caliber bolt and carrier group. Features include Bolt Cleaner/Scraper, Firing Pin Cleaner, ¼" Hex Head, Carrier Cleaner/Scraper with a Patch Hole. The bolt cleaning chamber is CNC machined to precisely fit a mil-spec bolt. - Approximately 3.5" long / 1.5 ounces. 100% made in the U.S.A.

    Sku: carbonscraper-762

    Learn More
  10. CLEANER-PATCH-223 : cleaning patches for 223 - 100 count

    An absolute essential in your weapons cleaning gear, SEAL 1T 100% cotton flannel, double napped.223 bore cleaning patches have the density of the old style patches offering the durability to get the job done properly. These 1 1/4" diameter patches work for rifles from .22 to .270 caliber, and are packaged in a plastic bag of 100. Top quality fabric - manufactured in the USA.

    Sku: cleaner-patch-223

    Learn More
  11. CLEANER-PATCH-OUT : Cleaner wipe-out patch brushless bore

    This revolutionary new product has impressed us with its effectiveness. Heavily fouled barrels come clean in a very short time - with no destructive brushing and no pitting. Simply run a patch heavily soaked with Wipe-Out through your gun's barrel and let it sit for 20 minutes, then run a clean patch through the bore. Powder fowling will show on the patch as grayish black, Copper fouling will be a deep navy blue, Carbon will be tan to brown in color. Apply again and let sit for 10 minutes. Another clean patch thru will show if any traces of fouling remain - if so re-apply until a patch comes through clean. Though Patch-Out contains no acids or ammonia, it will dissolve brass, bronze, and copper, and will degrade lead so it can be pushed out with a patch. It cannot cause rust, will not gum or form solids in either the action or the barrel, and is safe for all barrel steels - both carbon and stainless. 8 Fluid Ounces - made in the U.S.A.

    Sku: cleaner-patch-out

     

    Learn More
  12. CLEANINGMAT : cleaning gun mat - magnetic

    Our gunsmith discovered this great workbench mat for the armorer or AR Carbine owner and he's been using one ever since. From Armor Industrial Products, this Windham Weaponry customized Work-Shield Gun Mat is made from heavy black material in 54" x 16" dimensions. It incorporates two strips of magnetic material that hold springs, detents and small parts in place while you work and also serve to keep the mat neatly rolled up when work is complete. The material is Industrial Grade PVC Membrane that will withstand solvents and bore cleaners and will not absorb chemicals. It protects your table top and gun while you're working, will not break down over time, cleans easily with a cloth, and is custom screen printed with a gold Windham Weaponry logo. Made in the U.S.A.

    Sku: cleaningmat

    Learn More
  13. CLEANINGROD-30 : Dewey 30 inch cleaning rod

    Dewey Rods are famous throughout the shooting world for their quality and durability. For all .22 / .223 / 5.56mm barrels, this 30" rod is nylon coated to protect rifling and has a heavy plastic handle with internal ball bearings to allow the rod to track the rifling in the bore as you clean. Included with the rod is an 8/32 male to female thread adapter and a jag.

    Sku: cleaningrod-30

    Learn More
  14. CLEANINGROD-ADAPT : cleaning rod adapter 8/36

    This little brass piece from Dewey is the necessary link to connect 8/32 thread .22 Cal. Rods to 8/36 thread military style brushes. Machined from solid brass, and made in the USA.

    Learn More
  15. CLEANINGROD-CHAMBER : Dewey chamber rod & brush

    This quality Dewey tool is specifically for the AR15 / M16 with a brush sized for .223 / 5.56mm caliber chamber. The 16" heavy brass rod and sturdy plastic handle are long enough to easily reach the chamber through the rear of the receiver, and a quality bronze and steel wire chamber brush is included.

    Sku: cleaningrod-chamber

    Learn More
  16. GUNTIPS-EXT : Gun-Tips Extended Reach Cleaning Foam Swab - 24 pack

    This value pack includes 24 Extended Reach Firearm Foam Cleaning Swabs that will revolutionize the way you clean and lubricate your firearms. Use them to effectively clean trigger assemblies, pins and levers, slides, rails, magazines and magazine wells. These handy swabs are shed resistant, lint and fiber free, economical, washable, reusable, nonabrasive and durable. They'll stand up to most commercially available solvents, and can be cleaned with mineral spirits. 24 Gun-tips are packed in a re-sealable plastic bag - made in the USA by Swab-Its.

    Foam Swab Dimensions are:
    Head Width: 5mm (.19")
    Head Length: 12mm (.50")
    Handle Width: 4mm (.17")
    Handle Length: 152mm (6")

    Sku: guntips-ext

    Learn More
  17. HAMMER-4OZ : Hammer ball pein 4 oz

    With the proper weight and size for AR15 / M16 Armorers work this sturdy ball peen style hammer will cover a variety Armorer's chores. It's beautiful Hickory hardwood handle is comfortable in the hand, and the 4 ounce head is perfectly balanced. A quality tool you'll want to pass on to future generations - made in USA.

    Sku: hammer-4oz

    Learn More
  18. KIT-PUNCHSET : Drift punch set

    All the drift Punches you need for work on the AR15/M16 platform rifle, this quality set of Starret punches includes 1/16th; 3/32nd; 1/8th"and 5/32nd" sizes for driving out spring pins, hammer & trigger pins, and a number of other AR tasks. Machined from tool steel with a knurled gripping surface and etched size markings. Made in the USA. Set of 4.

    Sku: kit-punchset

    Learn More
  19. PUNCHES-STARTER : Punches spring pin starter

    This indispensable set of tools is specifically created for the tasks of holding and starting the various Spring Pins used in the AR15/M16. They are drilled to hold the spring pin as you begin to drive it into position and will keep from marring the receiver's finish. The set also includes a tool specially made for installing the A2 Rear Sight Elevation Spring. Machined from tool steel and made in the USA.

    Sku: punches-starter

    Learn More
  20. SDRIVER5-16 : Screwdriver 5/16 inch blade

    This sturdy 5/16th" flat bladed screwdriver is perfectly sized for a number of AR15/M16 Armorer's chores - specifically the top screw on an A2 solid buttstock - but it's ergonomically designed tri-lobe handle provides maximum tip torque, and its rugged construction will suggest many more uses. Features a durable bi-material handle with comfort grip and a magnetic tip for secure grip on fasteners. Made in USA.

    Sku: sdriver5-16

    Learn More
  21. TDPINTOOL : Takedown pin tool

    This handy little tool that will push out Takedown or Pivot pins in the AR Lower Receiver. The hole in the end of the shaft aids in Pivot Pin and Pivot Pin Detent installation. The oblong recess machined into the knurled end aids in the installation of the Magazine Catch Button. CNC machined from strong black nylon material with a non-slip knurled grip. Made in the USA.

    Sku: tdpintool

    Learn More
  22. TOOLBOX : Armorers tool kit storage box

    Perfect for keeping your armorers or other shooting gear and ammo dry, this Plano Dry Seal Case features a water-resistant O-ring seal to keep the water out. The top access storage and an additional lid compartment provide excellent capacity and organization, while a comfortable molded handle makes transport easy and convenient. Extremely durable, with lock tabs for your padlock, a brass wire locking latch, and sturdy end hinge like a GI ammo box, dimensions are: 15" x 8" x 6.25". Made in USA.

    Sku: toolbox

    Learn More
  23. WRENCH-TELE : Telestock wrench

    An essential tool for the armorer or AR Carbine owner, this dual function steel Telestock Wrench will quickly tighten or loosen the castellated nut that locks the Telestock to the Receiver. It includes a cutout that fits the end of the receiver extension tube on a standard A2 stocked rifle, and the handle is plastic dip coated to make use more comfortable. Machined from black manganese phosphate coated steel - made in the U.S.A.

    Sku: wrench-tele

    Learn More
  24. WRENCH1-16 : wrench allen 1/16

    This Allen Wrench is the size you need to adjust the index screw on an A2 or Carry Handle Rear Sight. Tool steel - made in the USA.

    Sku: wrench1-16

    Learn More
  25. WRENCH3-16T : Wrench t-handle allen 3/16

    AR15 / M16 Armorers know that the AR pistol grip screw can be difficult to reach. This is the tool we use - and recommend. This 3/16th size Allen Wrench with a comfortable red vinyl dipped cushion handle will provide years of service, and plenty of length to reach into that pistol grip. Made in USA.

    Sku: wrench3-16t

    Learn More
View as List Grid

43 Items

per page
Set Descending Direction
In Stock
*Estimated delivery could vary on some products.

Following a manufacturers price increase, we reserve the right to change product prices at any time without further notice.


© 2021 CAI is a registered trademark of Civil Arms Inc. -All rights reserved.