Daniel Defense

Daniel Defense
View as List Grid

Items 1-50 of 260

Page
per page
Set Descending Direction
In Stock
  1. 01-002-07234-131 : [DD-8130] RISII/AR15 Lite Rail BBL Nut  Steel
    The Daniel Defense Bolt-Up System Barrel Nut is designed to work with the Bolt-Up Plates used in mounting the RIS II, DDM4 RailT, AR15 Lite RailT, AR15 Lite RailT II, AR15 Lite RailT III, and SLiM RailT. They are precision machined from 4140 steel and have a Mil-Spec Heavy Phosphate finish.  It is designed to be torqued down or removed with the Bolt-Up System Barrel Nut Wrench (Sold Separately). This barrel nut will work on standard AR-15, M-4, and M-16 pattern upper receivers and barrels. Learn More
  2. 01-004-08001 : RIS II M4A1 ASSEMBLY FDE
    The Daniel Defense Rail Interface System (RIS II) was designed at the request of the United States Special Operations Command (SOCOM) for the SOPMOD II program. SOCOM had a specific requirement for a free float M203 solution and Daniel Defense responded, designing a revolutionary product to meet the government’s need. The Daniel Defense RIS II allows the individual operator to free float the M203 grenade launcher without additional parts. As important, special tools are not required to mount the M203 grenade launcher. This was accomplished by integrating all of the needed parts to free float the M203 into the rail itself. The Daniel Defense RIS II is to be used in conjunction with the MK12 Low Profile Gas Block. Learn More
  3. 01-004-08001-006 : RIS II M4A1 ASSEMBLY BLK
    The Daniel Defense Rail Interface System (RIS II) was designed at the request of the United States Special Operations Command (SOCOM) for the SOPMOD II program. SOCOM had a specific requirement for a free float M203 solution and Daniel Defense responded, designing a revolutionary product to meet the government’s need. The Daniel Defense RIS II allows the individual operator to free float the M203 grenade launcher without additional parts. As important, special tools are not required to mount the M203 grenade launcher. This was accomplished by integrating all of the needed parts to free float the M203 into the rail itself. The Daniel Defense RIS II is to be used in conjunction with the MK12 Low Profile Gas Block. Learn More
  4. 01-004-08020-006 : RIS II MK18 ASSEMBLY BLK
    The Daniel Defense Rail Interface System (RIS II) was designed at the request of the United States Special Operations Command (SOCOM) for the SOPMOD II program. SOCOM had a specific requirement for a free float M203 solution and Daniel Defense responded, designing a revolutionary product to meet the government’s need. The Daniel Defense RIS II allows the individual operator to free float the M203 grenade launcher without additional parts. As important, special tools are not required to mount the M203 grenade launcher. This was accomplished by integrating all of the needed parts to free float the M203 into the rail itself. The Daniel Defense RIS II is to be used in conjunction with the MK12 Low Profile Gas Block. Learn More
  5. 01-004-08020-011 : RIS II MK18 ASSEMBLY FDE
    The Daniel Defense Rail Interface System (RIS II) was designed at the request of the United States Special Operations Command (SOCOM) for the SOPMOD II program. SOCOM had a specific requirement for a free float M203 solution and Daniel Defense responded, designing a revolutionary product to meet the government’s need. The Daniel Defense RIS II allows the individual operator to free float the M203 grenade launcher without additional parts. As important, special tools are not required to mount the M203 grenade launcher. This was accomplished by integrating all of the needed parts to free float the M203 into the rail itself. The Daniel Defense RIS II is to be used in conjunction with the MK12 Low Profile Gas Block. Learn More
  6. 01-004-08030-006 : RIS II M4A1 FSP ASSEMBLY BLK

    DETAILS

    Daniel Defense is the Sole Source Provider of the RIS II to the United States Special Operations Command! The Daniel Defense Rail Interface System (RIS II) was designed at the request of the United States Special Operations Command (SOCOM) for the SOPMOD II program. SOCOM had a specific requirement for a free float M203 solution and Daniel Defense responded, designing a revolutionary product to meet the government’s need. The Daniel Defense RIS II allows the individual operator to free float the M203 grenade launcher without additional parts. As importantly, special tools are not required to mount the M203 grenade launcher. This was accomplished by integrating all of the needed parts to free float the M203 into the rail itself. The Daniel Defense RIS II is to be used in conjunction with the MK12 Low Profile Gas Block. The Daniel Defense RIS II free-floating Picatinny rail systems are designed to allow individual operators to quickly, and without special tools, mount the M203 Grenade Launcher and precisely mount SOPMOD accessories to host weapon without effecting point of impact. The Daniel Defense RIS II is an innovative upgrade to the M4 platform and is available for commercial purchase directly from Daniel Defense or any authorized distributor.

    Learn More
  7. 01-005-10001 : Omega Rail 7.0

    The Daniel Defense Omega Rail® system is the most exciting rail system to hit the market in years!

    The Omega Rail is a free float rail system that allows the individual operator to easily install it with the provided Allen Wrench and requires ZERO modification to the weapon!

    The Omega Rail features an integral QD sling swivel mount, with rotation limiter, and an uninterrupted upper rail platform. This light weight rail system is meticulously CNC machined from Aircraft Grade Aluminum and is Military Specification Type III Hard Coat Anodized.

    All the Omega Rail fasteners are military specification.

    The Omega Rail 7.0 is designed to work with carbine-length AR15 gas systems and its exceptionally light weight makes it perfect for short rifles where size and weight are crucial performance attributes.

    All Daniel Defense Rail Systems are built to the 1913 Military Specification and are 100% Quality Assurance checked for conformity to the specification.

     

    Learn More
  8. 01-005-10002 : Omega Rail 9.0

    The Daniel Defense Omega Rail® system is the most exciting rail system to hit the market in years!

    The Omega Rail is a free float rail system that allows the individual operator install it with the Allen Wrench provided and requires ZERO modification to the weapon!

    The Omega Rail features an integral QD sling swivel mount, with rotation limiter, and an uninterrupted upper rail platform. This light weight rail system is meticulously CNC machined from Aircraft Grade Aluminum and is Military Specification Type III Hard Coat Anodized.

    All the Omega Rail fasteners are military specification.

    The Omega Rail 9.0 is designed to work with Mid-Length AR15 gas systems.

    All Daniel Defense Rail Systems are built to the 1913 Military Specification and are 100% Quality Assurance checked for conformity to the specification.

    Learn More
  9. 01-107-09348 : MFR  10.0, M-LOK

    The MFR Rail Systems from Daniel Defense utilize the M-LOK attachment system for incredible weight savings as well as superior cooling, ergonomics, and modularity while maintaining the strength and durability expected from Daniel Defense. M-LOK attachment points are located along 7 positions on the rail and feature an uninterrupted 1913 Picatinny rail on top. Ambidextrous sling swivel attachment points are integrated into both the left and right side rails. Its sleek bolt-up system increases strength and reduces the overall diameter of the rail making it easier to control, all while utilizing a standard AR15 barrel nut. Anti-rotation tabs come standard for ease of installation and alignment. The MFR can be used with a pinned low-profile gas block on pistol, carbine, mid-length or rifle length gas systems.

    KEY FEATURES

    • Light Weight Free Floating Barrel Design
    • Steel Barrel Nut
    • Uninterrupted Mil-Spec 1913 Picatinny Upper Rail
    • M-Lok attachment at 7 different positions
    • Configurable Sling Swivel Attachment Points
    • Patented Bolt-Up Mounting System
    • Grade 8 Military Specification Fasteners

    MATERIALS & CONSTRUCTION

    • Material: Aircraft Grade 6061-T6 Aluminum
    • Finish: Military Specification Type III Hard Coat Anodized
    • Weight of Rail = 6.2 oz
    • Weight Installed = 8.4 oz (with Mounting Hardware)

    INSTALLATION REQUIREMENTS

    • Bolt-Up System Barrel Nut Wrench (Supplied)
    • Allen Wrench (Supplied)

    Made in the USA

    Learn More
  10. 01-107-15140 : MFR  9.0, M-LOK

    The MFR Rail Systems from Daniel Defense utilize the M-LOK attachment system for incredible weight savings as well as superior cooling, ergonomics, and modularity while maintaining the strength and durability expected from Daniel Defense. M-LOK attachment points are located along 7 positions on the rail and feature an uninterrupted 1913 Picatinny rail on top. Ambidextrous sling swivel attachment points are integrated into both the left and right side rails. Its sleek bolt-up system increases strength and reduces the overall diameter of the rail making it easier to control, all while utilizing a standard AR15 barrel nut. Anti-rotation tabs come standard for ease of installation and alignment. The MFR can be used with a pinned low-profile gas block on pistol, carbine, mid-length or rifle length gas systems.

    KEY FEATURES

    • Light Weight Free Floating Barrel Design
    • Steel Barrel Nut
    • Uninterrupted Mil-Spec 1913 Picatinny Upper Rail
    • M-Lok attachment at 7 different positions
    • Configurable Sling Swivel Attachment Points
    • Patented Bolt-Up Mounting System
    • Grade 8 Military Specification Fasteners

    MATERIALS & CONSTRUCTION

    • Material: Aircraft Grade 6061-T6 Aluminum
    • Finish: Military Specification Type III Hard Coat Anodized
    • Weight of Rail = 5.4 oz
    • Weight Installed = 7.6 oz (with Mounting Hardware)

    INSTALLATION REQUIREMENTS

    • Bolt-Up System Barrel Nut Wrench (Supplied)
    • Allen Wrench (Supplied)

    Made in the USA

    Learn More
  11. 01-107-15189-006 : MFR  13.5, M-LOK

    The MFR Rail Systems from Daniel Defense utilize the M-LOK attachment system for incredible weight savings as well as superior cooling, ergonomics, and modularity while maintaining the strength and durability expected from Daniel Defense. M-LOK attachment points are located along 7 positions on the rail and feature an uninterrupted 1913 Picatinny rail on top. Ambidextrous sling swivel attachment points are integrated into both the left and right side rails. Its sleek bolt-up system increases strength and reduces the overall diameter of the rail making it easier to control, all while utilizing a standard AR15 barrel nut. Anti-rotation tabs come standard for ease of installation and alignment. The MFR can be used with a pinned low-profile gas block on pistol, carbine, mid-length or rifle length gas systems.

    KEY FEATURES

    • Light Weight Free Floating Barrel Design
    • Steel Barrel Nut
    • Uninterrupted Mil-Spec 1913 Picatinny Upper Rail
    • M-Lok attachment at 7 different positions
    • Configurable Sling Swivel Attachment Points
    • Patented Bolt-Up Mounting System
    • Grade 8 Military Specification Fasteners

    MATERIALS & CONSTRUCTION

    • Material: Aircraft Grade 6061-T6 Aluminum
    • Finish: Military Specification Type III Hard Coat Anodized
    • Weight of Rail = 6.2 oz
    • Weight Installed = 8.4 oz (with Mounting Hardware)

    INSTALLATION REQUIREMENTS

    • Bolt-Up System Barrel Nut Wrench (Supplied)
    • Allen Wrench (Supplied)

    Made in the USA

    Learn More
  12. 01-107-16044 : MFR  15.0, M-LOK

    The MFR Rail Systems from Daniel Defense utilize the M-LOK attachment system for incredible weight savings as well as superior cooling, ergonomics, and modularity while maintaining the strength and durability expected from Daniel Defense. M-LOK attachment points are located along 7 positions on the rail and feature an uninterrupted 1913 Picatinny rail on top. Ambidextrous sling swivel attachment points are integrated into both the left and right side rails. Its sleek bolt-up system increases strength and reduces the overall diameter of the rail making it easier to control, all while utilizing a standard AR15 barrel nut. Anti-rotation tabs come standard for ease of installation and alignment. The MFR can be used with a pinned low-profile gas block on pistol, carbine, mid-length or rifle length gas systems.

    KEY FEATURES

    • Light Weight Free Floating Barrel Design
    • Steel Barrel Nut
    • Uninterrupted Mil-Spec 1913 Picatinny Upper Rail
    • M-Lok attachment at 7 different positions
    • Configurable Sling Swivel Attachment Points
    • Patented Bolt-Up Mounting System
    • Grade 8 Military Specification Fasteners

    MATERIALS & CONSTRUCTION

    • Material: Aircraft Grade 6061-T6 Aluminum
    • Finish: Military Specification Type III Hard Coat Anodized
    • Weight of Rail = 10.1 oz
    • Weight Installed = 12.3 oz (with Mounting Hardware)

    INSTALLATION REQUIREMENTS

    • Bolt-Up System Barrel Nut Wrench (Supplied)
    • Allen Wrench (Supplied)

    Made in the USA

    Learn More
  13. 01-134-08237 : DDM4 Rail 10.0


    The Daniel Defense DDM4 Rail, found on many DDM4 firearm configurations, features an optimized one-piece, free-floating architecture. This design results in the ergonomics and proven durability users demand while maintaining the lightweight characteristics they expect from Daniel Defense.

    The DDM4 Rail's ergonomic design allows operators to maintain better control of the firearm.  Limited rotation QD swivel attachment points are located at the front and rear of both sides of this rail system for tangle-free attachment for slings. A continuous picatinny rail on top provides the rail real estate for sights and accessories.

    DDM4 Rail 10.0 is compatible with low profile gas blocks on barrels 11" and longer with gas systems at Mid-length and shorter.

    Rail System includes all required hardware (Barrel Nut, Bolt-Up Plate, & Screws), tools (Barrel Nut Wrench & Allen Wrench), and 3 Daniel Defense Rail Ladders made of high temperature resistant Santoprene.

    Key Features

    • Lightweight Free Floating Barrel Design
    • Steel Barrel Nut
    • Uninterrupted Upper Rail Platform
    • Integral Sling Swivel Attachment Points with Limited Travel
    • Patented Bolt-Up System
    • Mil-Spec 1913 Picatinny Rails

    Materials & Construction

    • Material: Aircraft Grade 6061-T6 Aluminum
    • Finish: Military Specification Type III Hard Coat Anodized
    • Weight of Rail = 10.2 oz
    • Weight Installed = 11.9 oz (with Mounting Hardware)

    Installation Requirements

    • Bolt-Up System Barrel Nut Wrench (Supplied)
    • Allen Wrench (Supplied)

    Made in the USA

    Learn More
  14. 01-134-09186 : DDM4 Rail 15.0

    The Daniel Defense DDM4 Rail, found on many DDM4 firearm configurations, features an optimized one-piece, free-floating architecture. This design results in the ergonomics and proven durability users demand while maintaining the lightweight characteristics they expect from Daniel Defense.

    The DDM4 Rail's ergonomic design allows operators to maintain better control of the firearm.  Limited rotation QD swivel attachment points are located at the front and rear of both sides of this rail system for tangle-free attachment for slings. A continuous picatinny rail on top provides the rail real estate for sights and accessories.

    DDM4 Rail 15.0 is compatible with low profile gas blocks on barrels 16" and longer with gas systems at Rifle length and shorter.

    Rail System includes all required hardware (Barrel Nut, Bolt-Up Plate, & Screws), tools (Barrel Nut Wrench & Allen Wrench), and 3 Daniel Defense Rail Ladders made of high temperature resistant Santoprene.

    Key Features

    • Lightweight Free Floating Barrel Design
    • Steel Barrel Nut
    • Uninterrupted Upper Rail Platform
    • Integral Sling Swivel Attachment Points with Limited Travel
    • Patented Bolt-Up System
    • Mil-Spec 1913 Picatinny Rails

    Materials & Construction

    • Material: Aircraft Grade 6061-T6 Aluminum
    • Finish: Military Specification Type III Hard Coat Anodized
    • Weight of Rail = 14.8 oz
    • Weight Installed = 16.5 oz (with Mounting Hardware)

    Installation Requirements

    • Bolt-Up System Barrel Nut Wrench (Supplied)
    • Allen Wrench (Supplied)

    Made in the USA

    Learn More
  15. 01-134-15114 : DDM4 Rail 9.0


    The Daniel Defense DDM4 Rail, found on many DDM4 firearm configurations, features an optimized one-piece, free-floating architecture. This design results in the ergonomics and proven durability users demand while maintaining the lightweight characteristics they expect from Daniel Defense.

    The DDM4 Rail's ergonomic design allows operators to maintain better control of the firearm.  Limited rotation QD swivel attachment points are located at the front and rear of both sides of this rail system for tangle-free attachment for slings. A continuous picatinny rail on top provides the rail real estate for sights and accessories.

    DDM4 Rail 10.0 is compatible with low profile gas blocks on barrels 11" and longer with gas systems at Mid-length and shorter.

    Rail System includes all required hardware (Barrel Nut, Bolt-Up Plate, & Screws), tools (Barrel Nut Wrench & Allen Wrench), and 3 Daniel Defense Rail Ladders made of high temperature resistant Santoprene.

    Key Features

    • Lightweight Free Floating Barrel Design
    • Steel Barrel Nut
    • Uninterrupted Upper Rail Platform
    • Integral Sling Swivel Attachment Points with Limited Travel
    • Patented Bolt-Up System
    • Mil-Spec 1913 Picatinny Rails

    Materials & Construction

    • Material: Aircraft Grade 6061-T6 Aluminum
    • Finish: Military Specification Type III Hard Coat Anodized
    • Weight of Rail = 9.5 oz
    • Weight Installed = 11.2 oz (with Mounting Hardware)

    Installation Requirements

    • Bolt-Up System Barrel Nut Wrench (Supplied)
    • Allen Wrench (Supplied)

    Made in the USA

    Learn More
  16. 01-134-15163 : DDM4 Rail 12.0

    The Daniel Defense DDM4 Rail, found on many DDM4 firearm configurations, features an optimized one-piece, free-floating architecture. This design results in the ergonomics and proven durability users demand while maintaining the lightweight characteristics they expect from Daniel Defense.

    The DDM4 Rail's ergonomic design allows operators to maintain better control of the firearm.  Limited rotation QD swivel attachment points are located at the front and rear of both sides of this rail system for tangle-free attachment for slings. A continuous picatinny rail on top provides the rail real estate for sights and accessories.

    DDM4 Rail 10.0 is compatible with low profile gas blocks on barrels 11" and longer with gas systems at Mid-length and shorter.

    Rail System includes all required hardware (Barrel Nut, Bolt-Up Plate, & Screws), tools (Barrel Nut Wrench & Allen Wrench), and 3 Daniel Defense Rail Ladders made of high temperature resistant Santoprene.

    Key Features

    • Lightweight Free Floating Barrel Design
    • Steel Barrel Nut
    • Uninterrupted Upper Rail Platform
    • Integral Sling Swivel Attachment Points with Limited Travel
    • Patented Bolt-Up System
    • Mil-Spec 1913 Picatinny Rails

    Materials & Construction

    • Material: Aircraft Grade 6061-T6 Aluminum
    • Finish: Military Specification Type III Hard Coat Anodized
    • Weight of Rail = 12.4 oz
    • Weight Installed = 14.1 oz (with Mounting Hardware)

    Installation Requirements

    • Bolt-Up System Barrel Nut Wrench (Supplied)
    • Allen Wrench (Supplied)

    Made in the USA

    Learn More
  17. 02-088-01202-067 : MK18 10.3" Barrel, Semi Automatic Pistol (NO MAG) 5.56mm

    MK18 Pistol (Black)

    The Daniel Defense MK18 Pistol, equipped with the SB-Tactical SOB Pistol Stabilizing Brace, is a variation of the MK18 SBR, which has been extremely popular within the Law Enforcement and Special Operations communities. This firearm is classified as a Pistol and not a Short Barreled Rifle (NFA regulated items require ATF approval and a tax stamp). The Daniel Defense MK18 Pistol features the railed forend Daniel Defense currently provides to USSOCOM and a 10.3" Cold Hammer Forged Barrel, the same length commonly used for CQB operations. The MK18 RISII features the Bolt-Up System and has been rigorously tested prior to fielding by USSOCOM. This pistol comes equipped with the rugged and comfortable Daniel Defense Pistol Grip with an integral trigger guard and soft touch overmolding. The MK18 Pistol is unmatched in size, weight, and performance.

    Learn More
  18. 02-088-06027-011 : M4A1 Flat Dark Earth  14.5" Barrel, Semi Auto Rifle, 5.56mm One 32 Round Magazine
    The Daniel Defense M4A1 features the M4A1 RIS II, which has been in use by US Special Operations Command (SOCOM) for the SOPMOD II Weapons System since 2005.  The M4A1 features a 14.5" Cold Hammer Forged M4 Profile barrel with a permanently attached Daniel Defense Flash Suppressor.  This rifle also comes with the newly designed, rugged and comfortable Daniel Defense Buttstock and Pistol Grip. Learn More
  19. 02-088-06027-067 : M4A1 Flat Dark Earth (NO MAG)  14.5" Barrel, Semi Auto Rifle, 5.56mm

    M4A1

    The Daniel Defense M4A1 features the M4A1 RIS II, which has been in use by US Special Operations Command (SOCOM) for the SOPMOD II Weapons System since 2005.  The M4A1 features a 14.5" Cold Hammer Forged M4 Profile barrel with a permanently attached Daniel Defense Flash Suppressor.  This rifle also comes with the newly designed, rugged and comfortable Daniel Defense Buttstock and Pistol Grip.

    Learn More
  20. 02-088-06030-067 : MK18 10.3" Barrel, Semi Automatic Pistol (NO MAG) 5.56mm

    MK18 Pistol (FDE)

    The Daniel Defense MK18 Pistol, equipped with the SB-Tactical SOB Pistol Stabilizing Brace, is a variation of the MK18 SBR, which has been extremely popular within the Law Enforcement and Special Operations communities. This firearm is classified as a Pistol and not a Short Barreled Rifle (NFA regulated items require ATF approval and a tax stamp). The Daniel Defense MK18 Pistol features the railed forend Daniel Defense currently provides to USSOCOM and a 10.3" Cold Hammer Forged Barrel, the same length commonly used for CQB operations. The MK18 RISII features the Bolt-Up System and has been rigorously tested prior to fielding by USSOCOM. This pistol comes equipped with the rugged and comfortable Daniel Defense Pistol Grip with an integral trigger guard and soft touch overmolding. The MK18 Pistol is unmatched in size, weight, and performance.

    Learn More
  21. 02-088-07327 : MK18 (10.3" Barrel)-Black RIS II Semi Automatic Rifle, 5.56mm One 32 Round Magazine
    Use what "THEY" use.  The Daniel Defense MK18 features the railed forend Daniel Defense currently provides to USSOCOM and a 10.3" Cold Hammer Forged Barrel.  The Flat Dark Earth MK18 rail system features the Bolt-Up System and has been rigorously tested prior to fielding by USSOCOM (currently over 15,000 units).  The 10.3" barrel is the same length in use for the MK18 upper most commonly used for CQB operations.  The MK18 Factory SBR by Daniel Defense is unmatched in size, weight, and performance. This rifle also comes with the newly designed, rugged and comfortable Daniel Defense Buttstock and Pistol Grip. Learn More
  22. 02-088-07327-067 : MK18 (NO MAG) (10.3" Barrel)-Black RIS II Semi Automatic Rifle, 5.56mm

    MK18 (Black)

    Use what "THEY" use.  The Daniel Defense MK18 features the railed forend Daniel Defense currently provides to USSOCOM and a 10.3" Cold Hammer Forged Barrel.  The Flat Dark Earth MK18 rail system features the Bolt-Up System has been rigorously tested prior to fielding by USSOCOM (currently over 15,000 units).  The 10.3" barrel is the same length in use for the MK18 upper most commonly used for CQB operations.  The MK18 Factory SBR by Daniel Defense is unmatched in size, weight, and performance. This rifle also comes with the newly designed, rugged and comfortable Daniel Defense Buttstock and Pistol Grip.

    Learn More
  23. 02-088-15028-011 : MK18 10.3" Barrel NFA Semi Auto Rifle, 5.56mm One 32 Round Magazine

    DANIEL DEFENSE MK18 (MIL SPEC +®)

    Use what "THEY" use.  The Daniel Defense MK18 features the railed forend Daniel Defense currently provides to USSOCOM and a 10.3" Cold Hammer Forged Barrel.  The MK18 rail system features the Bolt-Up System has been rigorously tested prior to fielding by USSOCOM (currently over 15,000 units).  The 10.3" barrel is the same length in use for the MK18 upper most commonly used for CQB operations.  The MK18 Factory SBR by Daniel Defense is unmatched in size, weight, and performance.  Introduced in 2014, the MK18 is one of 4 models that is finished with the new Mil Spec + Cerakote.  This rifle also comes with the newly designed, rugged and comfortable Daniel Defense Buttstock and Pistol Grip.

    MATERIALS & CONSTRUCTION

    LOWER RECEIVER: Mil-Spec with Enhanced Flared Magazine Well and Rear Receiver QD Swivel Attachment Point. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized
    UPPER RECEIVER: Mil-Spec with Indexing Marks and M4 Feed Ramps. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized
    BARREL: Chrome Moly Vanadium Steel, Cold Hammer Forged, 1:7 twist, 10.3? Government Profile, Chrome Lined, and Mil-Spec Heavy Phosphate Coated
    GAS SYSTEM: Pinned Low Profile Gas Block CNC Machined of 4140 hardened steel with Mil-Spec Heavy Phosphate Coating, Carbine length, Direct Impingement
    MUZZLE DEVICE: Daniel Defense Flash Suppressor, 17-4 PH Stainless Steel, Salt Bath Nitride Finished
    BOLT CARRIER GROUP: M16 Profile, Chrome Lined, Properly Staked Gas Key
    BUFFER: H Buffer
    SIGHTS: Sold Separately
    HANDGUARD: Daniel Defense RIS II MK18, CNC Machined of 6061-T6 Aluminum, Type III Hard Coat Anodized and Cerakoted Mil Spec+
    RECEIVER EXTENSION: 6 Position Mil-Spec 7075-T6 Aluminum
    BUTTSTOCK: Daniel Defense Buttstock, Glass Filled Polymer with Soft Touch Overmolding
    PISTOL GRIP: Daniel Defense Pistol Grip, Glass Filled Polymer with Soft Touch Overmolding
    RAIL PANELS: 3 Rail Panels made from Santoprene, heat resistant to 300° F.
    FINISH: Mil Spec+ Cerakote
    Made in the USA!

    Learn More
  24. 02-088-15028-067 : MK18 10.3" Barrel NFA Semi Auto Rifle, 5.56mm (NO MAG)

    MK18 (Mil Spec +®)

    Use what "THEY" use.  The Daniel Defense MK18 features the railed forend Daniel Defense currently provides to USSOCOM and a 10.3" Cold Hammer Forged Barrel.  The MK18 rail system features the Bolt-Up System has been rigorously tested prior to fielding by USSOCOM (currently over 15,000 units).  The 10.3" barrel is the same length in use for the MK18 upper most commonly used for CQB operations.  The MK18 Factory SBR by Daniel Defense is unmatched in size, weight, and performance.  Introduced in 2014, the MK18 is one of 4 models that is finished with the new Mil Spec + Cerakote.  This rifle also comes with the newly designed, rugged and comfortable Daniel Defense Buttstock and Pistol Grip.

    Learn More
  25. 02-088-15126-011 : M4A1 14.5" Barrel, Semi Auto Rifle, 5.56mm One 32 Round Magazine

    DANIEL DEFENSE M4A1 (MIL SPEC +®)

    The Daniel Defense M4A1 features the M4A1 RIS II, which has been in use by US Special Operations Command (SOCOM) for the SOPMOD II Weapons System since 2005.  The M4A1 features a 14.5" Cold Hammer Forged M4 Profile barrel with a permanently attached Daniel Defense Flash Suppressor.  The M4A1 is one of many configurations that is finished with our Mil Spec + Cerakote.  This rifle also comes with the rugged and comfortable Daniel Defense Buttstock and Pistol Grip.

    MATERIALS & CONSTRUCTION

    LOWER RECEIVER: Mil-Spec with Enhanced Flared Magazine Well and Rear Receiver QD Swivel Attachment Point. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized
    UPPER RECEIVER: Mil-Spec with Indexing Marks and M4 Feed Ramps. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized
    BARREL: Chrome Moly Vanadium Steel, Cold Hammer Forged, 1:7 twist, 14.5? M4 Profile, Chrome Lined, and Mil-Spec Heavy Phosphate Coated
    GAS SYSTEM: Pinned Low Profile Gas Block CNC Machined of 4140 hardened steel with Mil-Spec Heavy Phosphate Coating, Carbine Length, Direct Impingement
    MUZZLE DEVICE: Pinned and Welded Daniel Defense Flash Suppressor, Extended, 17-4 PH Stainless Steel, Salt Bath Nitride Finished
    BOLT CARRIER GROUP: M16 Profile, Chrome Lined, Properly Staked Gas Key
    BUFFER: H Buffer
    SIGHTS: Sold Separately
    HANDGUARD: Daniel Defense M4A1 Rail Interface System (RIS) II, CNC Machined of 6061-T6 Aluminum
    RECEIVER EXTENSION: 6 Position Mil-Spec 7075-T6 Aluminum
    BUTTSTOCK: Daniel Defense Buttstock, Glass Filled Polymer with Soft Touch Overmolding
    PISTOL GRIP: Daniel Defense Pistol Grip, Glass Filled Polymer with Soft Touch Overmolding
    RAIL PANELS: Daniel Defense Rail Panels made from Santoprene, heat resistant to 300° F.
    FINISH: Daniel Defense Mil Spec + Cerakote
    Made in the USA!

    Learn More
  26. 02-088-15126-067 : M4A1 (NO MAG) 14.5" Barrel, Semi Auto Rifle, 5.56mm

    M4A1 (Mil Spec +®)

    The Daniel Defense M4A1 features the M4A1 RIS II, which has been in use by US Special Operations Command (SOCOM) for the SOPMOD II Weapons System since 2005.  The M4A1 features a 14.5" Cold Hammer Forged M4 Profile barrel with a permanently attached Daniel Defense Flash Suppressor.  The M4A1 is one of many configurations that is finished with our Mil Spec + Cerakote.  This rifle also comes with the rugged and comfortable Daniel Defense Buttstock and Pistol Grip.

    Learn More
  27. 02-088-17024 : MK18 (10.3" Barrel)-Flat Dark Earth RIS II Semi-Auto Rifle 5.56mm One 32 Rd Mag

    DANIEL DEFENSE MK18 - FLAT DARK EARTH

    Use what "THEY" use.  The Daniel Defense MK18 features the railed forend Daniel Defense currently provides to USSOCOM and a 10.3" Cold Hammer Forged Barrel.  The MK18 rail system features the Bolt-Up System has been rigorously tested prior to fielding by USSOCOM (currently over 15,000 units).  The 10.3" barrel is the same length in use for the MK18 upper most commonly used for CQB operations. The MK18 Factory SBR by Daniel Defense is unmatched in size, weight, and performance. This rifle also comes with the newly designed, rugged and comfortable Daniel Defense Buttstock and Pistol Grip.

    MATERIALS & CONSTRUCTION

    LOWER RECEIVER: Mil-Spec with Enhanced Flared Magazine Well and Rear Receiver QD Swivel Attachment Point. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized
    UPPER RECEIVER: Mil-Spec with Indexing Marks and M4 Feed Ramps. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized
    BARREL: Chrome Moly Vanadium Steel, Cold Hammer Forged, 1:7 twist, 10.3? Government Profile, Chrome Lined, and Mil-Spec Heavy Phosphate Coated
    GAS SYSTEM: Pinned Low Profile Gas Block CNC Machined of 4140 hardened steel with Mil-Spec Heavy Phosphate Coating, Carbine length, Direct Impingement
    MUZZLE DEVICE: Daniel Defense Flash Suppressor, 17-4 PH Stainless Steel, Salt Bath Nitride Finished
    BOLT CARRIER GROUP: M16 Profile, Chrome Lined, Properly Staked Gas Key
    BUFFER: H Buffer
    SIGHTS: Sold Separately
    HANDGUARD: Daniel Defense RIS II MK18, CNC Machined of 6061-T6 Aluminum, Type III Hard Coat Anodized and Cerakoted Mil Spec+
    RECEIVER EXTENSION: 6 Position Mil-Spec 7075-T6 Aluminum
    BUTTSTOCK: Daniel Defense Buttstock, Glass Filled Polymer with Soft Touch Overmolding
    PISTOL GRIP: Daniel Defense Pistol Grip, Glass Filled Polymer with Soft Touch Overmolding
    RAIL PANELS: 3 Rail Panels made from Santoprene, heat resistant to 300° F.
    FINISH: Flat Dark Earth 
    Made in the USA!

    Learn More
  28. 02-088-17024-067 : MK18 (NO MAG) (10.3" Barrel)-Flat Dark Earth RIS II  Semi Automatic Rifle, 5.56mm

    MK18 (FDE)

    Use what "THEY" use.  The Daniel Defense MK18 features the railed forend Daniel Defense currently provides to USSOCOM and a 10.3" Cold Hammer Forged Barrel.  The Flat Dark Earth MK18 rail system features the Bolt-Up SystemT has been rigorously tested prior to fielding by USSOCOM (currently over 15,000 units).  The 10.3" barrel is the same length in use for the MK18 upper most commonly used for CQB operations.  The MK18 Factory SBR by Daniel Defense is unmatched in size, weight, and performance. This rifle also comes with the newly designed, rugged and comfortable Daniel Defense Buttstock and Pistol Grip.

    Learn More
  29. 02-088-22038-067 : MK18 10.3" Barrel Semi-Auto Pistol 5.56mm w/ Law Tactical Gen III Adaptr (NO MAG)

    MK18 Pistol (Law Tactical)

    The Daniel Defense MK18 Pistol, equipped with the SB-Tactical SOB Pistol Stabilizing Brace and LAW Tactical GEN3M folding stock adapter, is a variation of the MK18 SBR, which has been extremely popular within the Law Enforcement and Special Operations communities. This firearm is classified as a Pistol and not a Short Barreled Rifle (NFA regulated items require ATF approval and a tax stamp). The Daniel Defense MK18 Pistol features the railed forend Daniel Defense currently provides to USSOCOM and a 10.3" Cold Hammer Forged Barrel, the same length commonly used for CQB operations. The MK18 RISII features the Bolt-Up System and has been rigorously tested prior to fielding by USSOCOM. This pistol comes equipped with the rugged and comfortable Daniel Defense Pistol Grip with an integral trigger guard and soft touch overmolding. The MK18 Pistol is unmatched in size, weight, and performance.

    Learn More
  30. 02-103-02041 : DDM4ISR 300 BLK (Integrally Suppressed) 9" Barrel Semi-Auto Rifle One 32 Rd Mag

    DANIEL DEFENSE ISR (MIL SPEC +®)

    The Daniel Defense DDM4ISR is our Integrally Suppressed Weapon System optimized for the .300 Blackout cartridge. Built around a 9", Cold Hammer Forged barrel that is fluted along with a target crown and a standard pistol-length gas system, this versatile, high-performance rifle is the complete package, accurately delivering both subsonic and supersonic projectiles downrange with unrelenting reliability. Because the suppressor is an integral part of the barrel, this weapon system is ready for service right out of the box. There's no attaching a suppressor and wondering if it's mounted correctly and/or properly aligned. There's no re-zeroing for suppressed vs. unsuppressed fire.

    The DDM4ISR's integral suppressor extends the barrel to an NFA-required 16 inches in length, so this platform is not classified as a Short Barreled Rifle (SBR) and therefore only requires a single tax stamp (for the suppressor). The suppressor's lightweight outer tube is constructed of durable, heat-resistant metal alloys and coated with a protective high-temperature Cerakote-C finish, which is able of withstanding extreme temperatures and harsh environments. The suppressor is also user-serviceable, so its baffle core can be easily removed for periodic cleaning in order to maintain peak performance.

    The DDM4ISR comes standard with Daniel Defense's MFR XL 15.0 modular handguard, which features a continuous 1913 Picatinny rail on its top, for the mounting of iron sights or optics, and Keymod attachment points on the sides and bottom. This longer, multi-functional handguard, in conjunction with a Daniel Defense Buttstock and Pistol Grip, make the DDM4ISR as ergonomic and maneuverable as it is versatile. A resilient, attractive Mil Spec + Cerakote finish not only protects this weapon system from the elements, it also adds to its overall aesthetics-so while you're sending rounds down range; you'll also turn a few heads.

    MATERIALS & CONSTRUCTION

    Precision crafted from the highest quality material available today with meticulous attention to detail, the DDM4 is a proven benchmark in the industry; The DDM4ISR takes it a step beyond what other manufacturers

    UPPER RECEIVER: Mil-Spec with Indexing Marks and M4 Feed Ramps
    LOWER RECEIVER: Mil-Spec with Enhanced Flared Magazine Well and Rear Receiver QD Swivel Attachment Point
    UPPER RECEIVER: Mil-Spec with Indexing Marks and M4 Feed Ramps. CNC Machined of 7075-T6 Aluminum
    BARREL: Chrome Moly Vanadium Steel, Cold Hammer Forged, 1:8, 9? S2W Profile, Chrome Lined, and Mil-Spec Heavy Phosphate Coated
    INTEGRATED SUPPRESSOR: All Stainless Steel Construction, 17-4PH Monolithic Baffle, High-temp Cerakote-C Finish, Pinned and Welded Assembly.
    GAS SYSTEM: Daniel Defense ISR Integrated Gas Block, Pistol Length, Direct Impingement
    BOLT CARRIER GROUP: Mil-Spec MP Tested, Properly Staked Gas Key
    BUFFER: H Buffer
    SIGHTS: Sold Separately
    HANDGUARD: MFR XL 15.0
    RECEIVER EXTENSION: 6 Position Mil-Spec 7075-T6 Aluminum
    BUTTSTOCK: Daniel Defense Buttstock, Glass Filled Polymer with Soft Touch Overmolding
    PISTOL GRIP: Daniel Defense Pistol Grip, Glass Filled Polymer with Soft Touch Overmolding
    GRIP: Daniel Defense Vertical Grip, Glass Filled Polymer with Soft Touch Overmolding
    FINISH: Mil Spec + Cerakote
    Made in the USA!

    Learn More
  31. 02-103-02041-067 : DDM4ISR 300 BLK (NO MAG) (Integrally Suppressed) 9" Barrel Semi-Auto Rifle

    DDM4ISR®

    The Daniel Defense DDM4ISR is our Integrally Suppressed Weapon System optimized for the .300 Blackout cartridge. Built around a 9", Cold Hammer Forged barrel that is fluted along with a target crown and a standard pistol-length gas system, this versatile, high-performance rifle is the complete package, accurately delivering both subsonic and supersonic projectiles downrange with unrelenting reliability. Because the suppressor is an integral part of the barrel, this weapon system is ready for service right out of the box. There's no attaching a suppressor and wondering if it's mounted correctly and/or properly aligned. There's no re-zeroing for suppressed vs. unsuppressed fire.

    The DDM4ISR's integral suppressor extends the barrel to an NFA-required 16 inches in length, so this platform is not classified as a Short Barreled Rifle (SBR) and therefore only requires a single tax stamp (for the suppressor). The suppressor's lightweight outer tube is constructed of durable, heat-resistant metal alloys and coated with a protective high-temperature Cerakote-C finish, which is able of withstanding extreme temperatures and harsh environments. The suppressor is also user-serviceable, so its baffle core can be easily removed for periodic cleaning in order to maintain peak performance.

    The DDM4ISR comes standard with Daniel Defense's MFR XL 15.0 modular handguard, which features a continuous 1913 Picatinny rail on its top, for the mounting of iron sights or optics, and Keymod attachment points on the sides and bottom. This longer, multi-functional handguard, in conjunction with a Daniel Defense Buttstock and Pistol Grip, make the DDM4ISR as ergonomic and maneuverable as it is versatile.

    Learn More
  32. 02-103-15139 : DDM4ISR 300 BLK (Integrally Suppressed)  9" Barrel Semi-Auto Rifle One 32 Rd Mag

    DDM4ISR® (Mil Spec +®)

    The Daniel Defense DDM4ISR is our Integrally Suppressed Weapon System optimized for the .300 Blackout cartridge. Built around a 9", Cold Hammer Forged barrel that is fluted along with a target crown and a standard pistol-length gas system, this versatile, high-performance rifle is the complete package, accurately delivering both subsonic and supersonic projectiles downrange with unrelenting reliability. Because the suppressor is an integral part of the barrel, this weapon system is ready for service right out of the box. There's no attaching a suppressor and wondering if it's mounted correctly and/or properly aligned. There's no re-zeroing for suppressed vs. unsuppressed fire.

    The DDM4ISR's integral suppressor extends the barrel to an NFA-required 16 inches in length, so this platform is not classified as a Short Barreled Rifle (SBR) and therefore only requires a single tax stamp (for the suppressor). The suppressor's lightweight outer tube is constructed of durable, heat-resistant metal alloys and coated with a protective high-temperature Cerakote-C finish, which is able of withstanding extreme temperatures and harsh environments. The suppressor is also user-serviceable, so its baffle core can be easily removed for periodic cleaning in order to maintain peak performance.

    The DDM4ISR comes standard with Daniel Defense's MFR XL 15.0 modular handguard, which features a continuous 1913 Picatinny rail on its top, for the mounting of iron sights or optics, and Keymod attachment points on the sides and bottom. This longer, multi-functional handguard, in conjunction with a Daniel Defense Buttstock and Pistol Grip, make the DDM4ISR as ergonomic and maneuverable as it is versatile. A resilient, attractive Mil Spec + Cerakote finish not only protects this weapon system from the elements, it also adds to its overall aesthetics-so while you're sending rounds down range; you'll also turn a few heads.

    Learn More
  33. 02-103-15139-067 : DDM4ISR 300 BLK (Integrally Suppressed)  (NO MAG)  9" Barrel Semi-Auto Rifle

    DDM4ISR® (Mil Spec +®)

    The Daniel Defense DDM4ISR is our Integrally Suppressed Weapon System optimized for the .300 Blackout cartridge. Built around a 9", Cold Hammer Forged barrel that is fluted along with a target crown and a standard pistol-length gas system, this versatile, high-performance rifle is the complete package, accurately delivering both subsonic and supersonic projectiles downrange with unrelenting reliability. Because the suppressor is an integral part of the barrel, this weapon system is ready for service right out of the box. There's no attaching a suppressor and wondering if it's mounted correctly and/or properly aligned. There's no re-zeroing for suppressed vs. unsuppressed fire.

    The DDM4ISR's integral suppressor extends the barrel to an NFA-required 16 inches in length, so this platform is not classified as a Short Barreled Rifle (SBR) and therefore only requires a single tax stamp (for the suppressor). The suppressor's lightweight outer tube is constructed of durable, heat-resistant metal alloys and coated with a protective high-temperature Cerakote-C finish, which is able of withstanding extreme temperatures and harsh environments. The suppressor is also user-serviceable, so its baffle core can be easily removed for periodic cleaning in order to maintain peak performance.

    The DDM4ISR comes standard with Daniel Defense's MFR XL 15.0 modular handguard, which features a continuous 1913 Picatinny rail on its top, for the mounting of iron sights or optics, and Keymod attachment points on the sides and bottom. This longer, multi-functional handguard, in conjunction with a Daniel Defense Buttstock and Pistol Grip, make the DDM4ISR as ergonomic and maneuverable as it is versatile. A resilient, attractive Mil Spec + Cerakote finish not only protects this weapon system from the elements, it also adds to its overall aesthetics-so while you're sending rounds down range; you'll also turn a few heads.

    Learn More
  34. 02-122-17026-047 : DDM4 300 S 300 BLK (10.3" Barrel) Semi-Auto Rifle 300 BLK One 32 Rd Mag

    DANIEL DEFENSE 300T S- FACTORY SBR

    The DDM4 300S was designed for those demanding a high-performance, short-barrel rifle chambered in the versatile 300 Blackout cartridge. Built around a 10.3" Strength-to-Weight (S2W®) profile barrel, the 300S uses standard 5.56 bolts and magazines to deliver .30 caliber projectiles with greater muzzle energy than comparable 5.56mm platforms.  The increasingly popular 300 Blackout cartridge has proven itself to be extremely efficient in short-barrel rifles, yielding superior ballistics over the venerable 7.62x39 cartridge.  With a wide variety of factory ammunition made for everything from home defense, target shooting, hunting, suppressed operation, and tactical applications, the 300S is capable of delivering exceptional performance from a compact, fast-handling package.

    MATERIALS & CONSTRUCTION

    LOWER RECEIVER: Mil-Spec with Enhanced Flared Magazine Well and Rear Receiver QD Swivel Attachment Point. CNC Machined of 7075-T6 Aluminum, Type III Hard-Coat Anodized
    UPPER RECEIVER: Mil-Spec with Indexing Marks and M4 Feed Ramps. CNC Machined of 7075-T6 Aluminum, Type III Hard-Coat Anodized
    BARREL: Chrome Moly Vanadium Steel, Cold Hammer Forged, 1:8, 10.3? S2W Profile, Salt Bath Nitride Finished, and HP/MPI Tested
    GAS SYSTEM: Pinned Low-Profile Gas Block CNC Machined from 4140 Hardened Steel with Mil-Spec Heavy Phosphate Coating, Pistol Length, Direct Impingement
    MUZZLE DEVICE: Daniel Defense Flash Suppressor, 17-4 PH Stainless Steel, Salt Bath Nitride Finished
    BOLT CARRIER GROUP: M16 Profile, Mil-Spec MP Tested, Chrome Lined, Properly Staked Gas Key
    BUFFER: H Buffer
    SIGHTS: Sold Separately
    HANDGUARD: Daniel Defense DDM4 Rail 9.0, CNC Machined from 6061-T6 Aluminum, Type III Hard-Coat Anodized
    RECEIVER EXTENSION: Six-Position Mil-Spec 7075-T6 Aluminum
    BUTTSTOCK: Daniel Defense Buttstock, Glass-Filled Polymer with Soft-Touch Overmolding
    PISTOL GRIP: Daniel Defense Pistol Grip, Glass-Filled Polymer with Soft-Touch Overmolding
    GRIP: Daniel Defense Vertical Grip, Glass-Filled Polymer with Soft-Touch Overmolding
    RAIL PANELS: Daniel Defense Rail Panels made from Santoprene, Heat Resistant to 300° Fahrenheit
    Made in the USA!

    Learn More
  35. 02-122-17026-067 : DDM4 300 S (NO MAG) 300 AAC Blackout (10.3" Barrel) Semi Automatic Rifle, 300 BLK

    DDM4®300 S (Factory SBR)

    The DDM4 300S was designed for those demanding a high-performance, short-barrel rifle chambered in the versatile 300 Blackout cartridge. Built around a 10.3" Strength-to-Weight (S2W) profile barrel, the 300S uses standard 5.56 bolts and magazines to deliver .30 caliber projectiles with greater muzzle energy than comparable 5.56mm platforms.  The increasingly popular 300 Blackout cartridge has proven itself to be extremely efficient in short-barrel rifles, yielding superior ballistics over the venerable 7.62x39 cartridge.  With a wide variety of factory ammunition made for everything from home defense, target shooting, hunting, suppressed operation, and tactical applications, the 300S is capable of delivering exceptional performance from a compact, fast-handling package.

    Learn More
  36. 02-128-00166 : DDM4 V7 10.3" Barrel, Semi Auto, 300 BLK Pistol One 32 Round Magazine

    DDM4®V7®p (300 Blackout)(Mil Spec +®)

    This highly maneuverable pistol pairs a 10.3" barrel and the MFR 9.0 rail for fast handling, accuracy, and reliability while also providing compatibility with a wide variety of muzzle devices and sound suppressors for even more customization. A variation of the DDM4V7 S, it features the SB Tactical SOB Pistol Stabilizing Brace and is classified as a pistol, not a short-barreled rifle, so it does not require ATF approval and a tax stamp. The Daniel Defense DDM4V7 P features M-LOK attachment technology, our Mil Spec + Cerakote and comes equipped with a rugged and comfortable Daniel Defense pistol grip with integral trigger guard and soft touch overmolding.

    Learn More
  37. 02-128-00166-067 : DDM4 V7 10.3" Barrel, Semi Auto, 300 BLK Pistol (NO MAG)

    DDM4®V7®p (300 Blackout)(Mil Spec +®)

    This highly maneuverable pistol pairs a 10.3" barrel and the MFR 9.0 rail for fast handling, accuracy, and reliability while also providing compatibility with a wide variety of muzzle devices and sound suppressors for even more customization. A variation of the DDM4V7 S, it features the SB Tactical SOB Pistol Stabilizing Brace and is classified as a pistol, not a short-barreled rifle, so it does not require ATF approval and a tax stamp. The Daniel Defense DDM4V7 P features M-LOK attachment technology, our Mil Spec + Cerakote and comes equipped with a rugged and comfortable Daniel Defense pistol grip with integral trigger guard and soft touch overmolding.

    Learn More
  38. 02-128-02081-067 : DDM4V7 (NO MAG)  16" Barrel, Semi Auto Rifle, 5.56mm

    DDM4®V7®

    The Daniel Defense V7 is the first rifle in the DDM4 lineup to feature the M-LOK® attachment technology with the Daniel Defense MFR 15.0 rail. Built around a Cold Hammer Forged, 16" barrel, the V7 has a DD improved Flash Suppressor to reduce flash signature. The mid-length gas system provides smooth and reliable cycling under any condition and reduces both perceived recoil and wear on moving parts.  A free-floating MFR 15.0 handguard offers incredible weight savings as well as superior cooling, ergonomics, and modularity while maintaining the strength and durability expected from Daniel Defense. With the M-LOK attachment points that run along 7 positions and an uninterrupted 1913 Picatinny rail on top, the V7 has plenty of room for the sights, optics, and accessories the user may require.  The rifle is finished off with the rugged and comfortable Daniel Defense Buttstock and Pistol grip.

    Learn More
  39. 02-128-02338-047 : DDM4V7  16" Barrel, Semi Auto Rifle, 5.56mm One 32 Round Magazine
    The Daniel Defense V7 is the first rifle in the DDM4 lineup to feature the M-LOK® attachment technology with the Daniel Defense MFR XS 15.0 rail. Built around a Cold Hammer Forged, 16" barrel, the V7 has a DD improved Flash Suppressor to reduce flash signature. The mid-length gas system provides smooth and reliable cycling under any condition and reduces both perceived recoil and wear on moving parts.  A free-floating MFR XS 15.0 handguard offers incredible weight savings as well as superior cooling, ergonomics, and modularity while maintaining the strength and durability expected from Daniel Defense. With the M-LOK attachment points that run along 7 positions and an uninterrupted 1913 Picatinny rail on top, the V7 has plenty of room for the sights, optics, and accessories the user may require.  The rifle is finished off with the rugged and comfortable Daniel Defense Buttstock and Pistol grip. This rifle is finished in Mil Spec + Cerakote. Learn More
  40. 02-128-02338-067 : DDM4V7 (NO MAG)   16" Barrel, Semi Auto Rifle, 5.56mm

    DDM4®V7® (Mil Spec +®)

    The Daniel Defense V7 is the first rifle in the DDM4 lineup to feature the M-LOK® attachment technology with the Daniel Defense MFR 15.0 rail. Built around a Cold Hammer Forged, 16" barrel, the V7 has a DD improved Flash Suppressor to reduce flash signature. The mid-length gas system provides smooth and reliable cycling under any condition and reduces both perceived recoil and wear on moving parts.  A free-floating MFR 15.0 handguard offers incredible weight savings as well as superior cooling, ergonomics, and modularity while maintaining the strength and durability expected from Daniel Defense. With the M-LOK attachment points that run along 7 positions and an uninterrupted 1913 Picatinny rail on top, the V7 has plenty of room for the sights, optics, and accessories the user may require.  The rifle is finished off with the rugged and comfortable Daniel Defense Buttstock and Pistol grip. This rifle is finished in Mil Spec + Cerakote.

    Learn More
  41. 02-128-07344-047 : DDM4V7 S (11.5" Barrel) Semi Automatic Rifle, 5.56mm One 32 Round Magazine
    The Daniel Defense DDM4V7S is our latest short-barreled rifle (SBR) to feature the M-LOK® attachment technology with the Daniel Defense MFR XS 10.0 rail. Built around a free-floating, Cold Hammer Forged 11.5" barrel, the V7S delivers optimal maneuverability, reliability, accuracy, and terminal ballistics using a wide variety of ammunition. The carbine length gas system provides smooth and reliable cycling under harsh conditions and reduces perceived recoil. A free-floating MFR XS 10.0 rail offers incredible weight savings as well as superior cooling, ergonomics, and modularity while maintaining the strength and durability expected from Daniel Defense. With the M-LOK attachment points that run along 7 positions and an uninterrupted 1913 Picatinny rail on top, the V7S has plenty of room for sights, optics, and accessories the user may require. Pairing an 11.5" barrel and the MFR XS 10.0 rail also ensures compatibility with a wide variety of muzzle devices and sound suppressors for even more rifle customization. This platform comes standardly equipped with our rugged and extremely comfortable Daniel Defense Buttstock and Pistol Grip. Learn More
View as List Grid

Items 1-50 of 260

Page
per page
Set Descending Direction
In Stock
*Estimated delivery could vary on some products.

Following a manufacturers price increase, we reserve the right to change product prices at any time without further notice.


© 2021 CAI is a registered trademark of Civil Arms Inc. -All rights reserved.