Firearms

DDM4®V1®

The DDM4V1, the original Daniel Defense Rifle, is built with a Cold Hammer Forged 16" M4 Profile barrel with a Carbine gas system.  It comes installed with our proprietary front sight base which is precision CNC machined from a solid billet of 4140 steel.  This FSB features a serrated curved design to minimize glare and is salt bath nitride treated minimizing corrosion and wear.  The DDM4 Rail 12.0T FSP allows the operator to mount a weapon light or aiming device forward of the front sight for optimal ergonomics and a clear line of sight.  Quick disconnect attachment points are integrated to the front and back on both sides of the rail for fully ambidextrous sling attachment.  This rifle also comes with the newly designed, rugged and comfortable Daniel Defense Buttstock and Pistol Grip.

MK18 Pistol (Black)

The Daniel Defense MK18 Pistol, equipped with the SB-Tactical SOB Pistol Stabilizing Brace, is a variation of the MK18 SBR, which has been extremely popular within the Law Enforcement and Special Operations communities. This firearm is classified as a Pistol and not a Short Barreled Rifle (NFA regulated items require ATF approval and a tax stamp). The Daniel Defense MK18 Pistol features the railed forend Daniel Defense currently provides to USSOCOM and a 10.3" Cold Hammer Forged Barrel, the same length commonly used for CQB operations. The MK18 RISII features the Bolt-Up System and has been rigorously tested prior to fielding by USSOCOM. This pistol comes equipped with the rugged and comfortable Daniel Defense Pistol Grip with an integral trigger guard and soft touch overmolding. The MK18 Pistol is unmatched in size, weight, and performance.

M4A1

The Daniel Defense M4A1 features the M4A1 RIS II, which has been in use by US Special Operations Command (SOCOM) for the SOPMOD II Weapons System since 2005.  The M4A1 features a 14.5" Cold Hammer Forged M4 Profile barrel with a permanently attached Daniel Defense Flash Suppressor.  This rifle also comes with the newly designed, rugged and comfortable Daniel Defense Buttstock and Pistol Grip.

MK18 Pistol (FDE)

The Daniel Defense MK18 Pistol, equipped with the SB-Tactical SOB Pistol Stabilizing Brace, is a variation of the MK18 SBR, which has been extremely popular within the Law Enforcement and Special Operations communities. This firearm is classified as a Pistol and not a Short Barreled Rifle (NFA regulated items require ATF approval and a tax stamp). The Daniel Defense MK18 Pistol features the railed forend Daniel Defense currently provides to USSOCOM and a 10.3" Cold Hammer Forged Barrel, the same length commonly used for CQB operations. The MK18 RISII features the Bolt-Up System and has been rigorously tested prior to fielding by USSOCOM. This pistol comes equipped with the rugged and comfortable Daniel Defense Pistol Grip with an integral trigger guard and soft touch overmolding. The MK18 Pistol is unmatched in size, weight, and performance.

MK18 (Black)

Use what "THEY" use.  The Daniel Defense MK18 features the railed forend Daniel Defense currently provides to USSOCOM and a 10.3" Cold Hammer Forged Barrel.  The Flat Dark Earth MK18 rail system features the Bolt-Up System has been rigorously tested prior to fielding by USSOCOM (currently over 15,000 units).  The 10.3" barrel is the same length in use for the MK18 upper most commonly used for CQB operations.  The MK18 Factory SBR by Daniel Defense is unmatched in size, weight, and performance. This rifle also comes with the newly designed, rugged and comfortable Daniel Defense Buttstock and Pistol Grip.

DDM4®V4®S

The DDM4V4s is Daniel Defense's latest short-barreled rifle (SBR). Its design is based on an extremely popular configuration that we've been providing to law enforcement personnel and agencies as well as civilian users who demand a lightweight, durable, and dependable SBR. Built around a free-floating, Cold Hammer Forged 11.5" barrel, the DDM4V4s delivers optimal maneuverability, reliability, accuracy, and terminal ballistics using a wide variety of ammunition.

Our DDM4 Rail 10.0 shields the rifle's barrel and carbine length, low profile gas block. This lightweight, ergonomic rail system affords ample room for securely mounting multiple accessories and offers the longest possible sight radius with iron sights. Quick-disconnect attachment points are fully integrated to the front and back of the rail on both sides for tangle-free, ambidextrous sling attachment. Three removable high-temperature-resistant Daniel Defense Rail Panels provide a secure, comfortable grip while also protecting the support hand from heat. Pairing an 11.5" barrel and a DDM4 Rail 10.0 also ensures compatibility with a wide variety of muzzle devices and sound suppressors for even more rifle customization. This platform comes standardly equipped with our rugged and extremely comfortable Daniel Defense Buttstock and Pistol Grip.

DANIEL DEFENSE MK18 (MIL SPEC +®)

Use what "THEY" use.  The Daniel Defense MK18 features the railed forend Daniel Defense currently provides to USSOCOM and a 10.3" Cold Hammer Forged Barrel.  The MK18 rail system features the Bolt-Up System has been rigorously tested prior to fielding by USSOCOM (currently over 15,000 units).  The 10.3" barrel is the same length in use for the MK18 upper most commonly used for CQB operations.  The MK18 Factory SBR by Daniel Defense is unmatched in size, weight, and performance.  Introduced in 2014, the MK18 is one of 4 models that is finished with the new Mil Spec + Cerakote.  This rifle also comes with the newly designed, rugged and comfortable Daniel Defense Buttstock and Pistol Grip.

MATERIALS & CONSTRUCTION

LOWER RECEIVER: Mil-Spec with Enhanced Flared Magazine Well and Rear Receiver QD Swivel Attachment Point. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized
UPPER RECEIVER: Mil-Spec with Indexing Marks and M4 Feed Ramps. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized
BARREL: Chrome Moly Vanadium Steel, Cold Hammer Forged, 1:7 twist, 10.3? Government Profile, Chrome Lined, and Mil-Spec Heavy Phosphate Coated
GAS SYSTEM: Pinned Low Profile Gas Block CNC Machined of 4140 hardened steel with Mil-Spec Heavy Phosphate Coating, Carbine length, Direct Impingement
MUZZLE DEVICE: Daniel Defense Flash Suppressor, 17-4 PH Stainless Steel, Salt Bath Nitride Finished
BOLT CARRIER GROUP: M16 Profile, Chrome Lined, Properly Staked Gas Key
BUFFER: H Buffer
SIGHTS: Sold Separately
HANDGUARD: Daniel Defense RIS II MK18, CNC Machined of 6061-T6 Aluminum, Type III Hard Coat Anodized and Cerakoted Mil Spec+
RECEIVER EXTENSION: 6 Position Mil-Spec 7075-T6 Aluminum
BUTTSTOCK: Daniel Defense Buttstock, Glass Filled Polymer with Soft Touch Overmolding
PISTOL GRIP: Daniel Defense Pistol Grip, Glass Filled Polymer with Soft Touch Overmolding
RAIL PANELS: 3 Rail Panels made from Santoprene, heat resistant to 300° F.
FINISH: Mil Spec+ Cerakote
Made in the USA!

MK18 (Mil Spec +®)

Use what "THEY" use.  The Daniel Defense MK18 features the railed forend Daniel Defense currently provides to USSOCOM and a 10.3" Cold Hammer Forged Barrel.  The MK18 rail system features the Bolt-Up System has been rigorously tested prior to fielding by USSOCOM (currently over 15,000 units).  The 10.3" barrel is the same length in use for the MK18 upper most commonly used for CQB operations.  The MK18 Factory SBR by Daniel Defense is unmatched in size, weight, and performance.  Introduced in 2014, the MK18 is one of 4 models that is finished with the new Mil Spec + Cerakote.  This rifle also comes with the newly designed, rugged and comfortable Daniel Defense Buttstock and Pistol Grip.

DANIEL DEFENSE M4A1 (MIL SPEC +®)

The Daniel Defense M4A1 features the M4A1 RIS II, which has been in use by US Special Operations Command (SOCOM) for the SOPMOD II Weapons System since 2005.  The M4A1 features a 14.5" Cold Hammer Forged M4 Profile barrel with a permanently attached Daniel Defense Flash Suppressor.  The M4A1 is one of many configurations that is finished with our Mil Spec + Cerakote.  This rifle also comes with the rugged and comfortable Daniel Defense Buttstock and Pistol Grip.

MATERIALS & CONSTRUCTION

LOWER RECEIVER: Mil-Spec with Enhanced Flared Magazine Well and Rear Receiver QD Swivel Attachment Point. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized
UPPER RECEIVER: Mil-Spec with Indexing Marks and M4 Feed Ramps. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized
BARREL: Chrome Moly Vanadium Steel, Cold Hammer Forged, 1:7 twist, 14.5? M4 Profile, Chrome Lined, and Mil-Spec Heavy Phosphate Coated
GAS SYSTEM: Pinned Low Profile Gas Block CNC Machined of 4140 hardened steel with Mil-Spec Heavy Phosphate Coating, Carbine Length, Direct Impingement
MUZZLE DEVICE: Pinned and Welded Daniel Defense Flash Suppressor, Extended, 17-4 PH Stainless Steel, Salt Bath Nitride Finished
BOLT CARRIER GROUP: M16 Profile, Chrome Lined, Properly Staked Gas Key
BUFFER: H Buffer
SIGHTS: Sold Separately
HANDGUARD: Daniel Defense M4A1 Rail Interface System (RIS) II, CNC Machined of 6061-T6 Aluminum
RECEIVER EXTENSION: 6 Position Mil-Spec 7075-T6 Aluminum
BUTTSTOCK: Daniel Defense Buttstock, Glass Filled Polymer with Soft Touch Overmolding
PISTOL GRIP: Daniel Defense Pistol Grip, Glass Filled Polymer with Soft Touch Overmolding
RAIL PANELS: Daniel Defense Rail Panels made from Santoprene, heat resistant to 300° F.
FINISH: Daniel Defense Mil Spec + Cerakote
Made in the USA!

M4A1 (Mil Spec +®)

The Daniel Defense M4A1 features the M4A1 RIS II, which has been in use by US Special Operations Command (SOCOM) for the SOPMOD II Weapons System since 2005.  The M4A1 features a 14.5" Cold Hammer Forged M4 Profile barrel with a permanently attached Daniel Defense Flash Suppressor.  The M4A1 is one of many configurations that is finished with our Mil Spec + Cerakote.  This rifle also comes with the rugged and comfortable Daniel Defense Buttstock and Pistol Grip.

DANIEL DEFENSE MK18 - FLAT DARK EARTH

Use what "THEY" use.  The Daniel Defense MK18 features the railed forend Daniel Defense currently provides to USSOCOM and a 10.3" Cold Hammer Forged Barrel.  The MK18 rail system features the Bolt-Up System has been rigorously tested prior to fielding by USSOCOM (currently over 15,000 units).  The 10.3" barrel is the same length in use for the MK18 upper most commonly used for CQB operations. The MK18 Factory SBR by Daniel Defense is unmatched in size, weight, and performance. This rifle also comes with the newly designed, rugged and comfortable Daniel Defense Buttstock and Pistol Grip.

MATERIALS & CONSTRUCTION

LOWER RECEIVER: Mil-Spec with Enhanced Flared Magazine Well and Rear Receiver QD Swivel Attachment Point. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized
UPPER RECEIVER: Mil-Spec with Indexing Marks and M4 Feed Ramps. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized
BARREL: Chrome Moly Vanadium Steel, Cold Hammer Forged, 1:7 twist, 10.3? Government Profile, Chrome Lined, and Mil-Spec Heavy Phosphate Coated
GAS SYSTEM: Pinned Low Profile Gas Block CNC Machined of 4140 hardened steel with Mil-Spec Heavy Phosphate Coating, Carbine length, Direct Impingement
MUZZLE DEVICE: Daniel Defense Flash Suppressor, 17-4 PH Stainless Steel, Salt Bath Nitride Finished
BOLT CARRIER GROUP: M16 Profile, Chrome Lined, Properly Staked Gas Key
BUFFER: H Buffer
SIGHTS: Sold Separately
HANDGUARD: Daniel Defense RIS II MK18, CNC Machined of 6061-T6 Aluminum, Type III Hard Coat Anodized and Cerakoted Mil Spec+
RECEIVER EXTENSION: 6 Position Mil-Spec 7075-T6 Aluminum
BUTTSTOCK: Daniel Defense Buttstock, Glass Filled Polymer with Soft Touch Overmolding
PISTOL GRIP: Daniel Defense Pistol Grip, Glass Filled Polymer with Soft Touch Overmolding
RAIL PANELS: 3 Rail Panels made from Santoprene, heat resistant to 300° F.
FINISH: Flat Dark Earth 
Made in the USA!

MK18 (FDE)

Use what "THEY" use.  The Daniel Defense MK18 features the railed forend Daniel Defense currently provides to USSOCOM and a 10.3" Cold Hammer Forged Barrel.  The Flat Dark Earth MK18 rail system features the Bolt-Up SystemT has been rigorously tested prior to fielding by USSOCOM (currently over 15,000 units).  The 10.3" barrel is the same length in use for the MK18 upper most commonly used for CQB operations.  The MK18 Factory SBR by Daniel Defense is unmatched in size, weight, and performance. This rifle also comes with the newly designed, rugged and comfortable Daniel Defense Buttstock and Pistol Grip.

DDM4ISR® (DANIEL DEFENSE® DEEP WOODS®)

The Daniel Defense DDM4ISR is our Integrally Suppressed Weapon System optimized for the .300 Blackout cartridge. Built around a 9", Cold Hammer Forged barrel that is fluted along with a target crown and a standard pistol-length gas system, this versatile, high-performance rifle is the complete package, accurately delivering both subsonic and supersonic projectiles downrange with unrelenting reliability. Because the suppressor is an integral part of the barrel, this weapon system is ready for service right out of the box. There's no attaching a suppressor and wondering if it's mounted correctly and/or properly aligned. There's no re-zeroing for suppressed vs. unsuppressed fire.

The DDM4ISR's integral suppressor extends the barrel to an NFA-required 16 inches in length, so this platform is not classified as a Short Barreled Rifle (SBR) and therefore only requires a single tax stamp (for the suppressor). The suppressor's lightweight outer tube is constructed of durable, heat-resistant metal alloys and coated with a protective high-temperature Cerakote-C finish, which is able of withstanding extreme temperatures and harsh environments. The suppressor is also user-serviceable, so its baffle core can be easily removed for periodic cleaning in order to maintain peak performance.

The DDM4ISR comes standard with Daniel Defense's MFR XL 15.0 modular handguard, which features a continuous 1913 Picatinny rail on its top, for the mounting of iron sights or optics, and Keymod attachment points on the sides and bottom. This longer, multi-functional handguard, in conjunction with a Daniel Defense Buttstock and Pistol Grip, make the DDM4ISR as ergonomic and maneuverable as it is versatile. A resilient, attractive Daniel Defense Deep Woods Cerakote finish not only protects this weapon system from the elements, it also adds to its overall aesthetics-so while you're sending rounds down range; you'll also turn a few heads.

DDM4ISR® (DANIEL DEFENSE® DEEP WOODS®)

The Daniel Defense DDM4ISR is our Integrally Suppressed Weapon System optimized for the .300 Blackout cartridge. Built around a 9", Cold Hammer Forged barrel that is fluted along with a target crown and a standard pistol-length gas system, this versatile, high-performance rifle is the complete package, accurately delivering both subsonic and supersonic projectiles downrange with unrelenting reliability. Because the suppressor is an integral part of the barrel, this weapon system is ready for service right out of the box. There's no attaching a suppressor and wondering if it's mounted correctly and/or properly aligned. There's no re-zeroing for suppressed vs. unsuppressed fire.

The DDM4ISR's integral suppressor extends the barrel to an NFA-required 16 inches in length, so this platform is not classified as a Short Barreled Rifle (SBR) and therefore only requires a single tax stamp (for the suppressor). The suppressor's lightweight outer tube is constructed of durable, heat-resistant metal alloys and coated with a protective high-temperature Cerakote-C finish, which is able of withstanding extreme temperatures and harsh environments. The suppressor is also user-serviceable, so its baffle core can be easily removed for periodic cleaning in order to maintain peak performance.

The DDM4ISR comes standard with Daniel Defense's MFR XL 15.0 modular handguard, which features a continuous 1913 Picatinny rail on its top, for the mounting of iron sights or optics, and Keymod attachment points on the sides and bottom. This longer, multi-functional handguard, in conjunction with a Daniel Defense Buttstock and Pistol Grip, make the DDM4ISR as ergonomic and maneuverable as it is versatile. A resilient, attractive Daniel Defense Deep Woods Cerakote finish not only protects this weapon system from the elements, it also adds to its overall aesthetics-so while you're sending rounds down range; you'll also turn a few heads.

DANIEL DEFENSE 300T S- FACTORY SBR

The DDM4 300S was designed for those demanding a high-performance, short-barrel rifle chambered in the versatile 300 Blackout cartridge. Built around a 10.3" Strength-to-Weight (S2W®) profile barrel, the 300S uses standard 5.56 bolts and magazines to deliver .30 caliber projectiles with greater muzzle energy than comparable 5.56mm platforms.  The increasingly popular 300 Blackout cartridge has proven itself to be extremely efficient in short-barrel rifles, yielding superior ballistics over the venerable 7.62x39 cartridge.  With a wide variety of factory ammunition made for everything from home defense, target shooting, hunting, suppressed operation, and tactical applications, the 300S is capable of delivering exceptional performance from a compact, fast-handling package.

MATERIALS & CONSTRUCTION

LOWER RECEIVER: Mil-Spec with Enhanced Flared Magazine Well and Rear Receiver QD Swivel Attachment Point. CNC Machined of 7075-T6 Aluminum, Type III Hard-Coat Anodized
UPPER RECEIVER: Mil-Spec with Indexing Marks and M4 Feed Ramps. CNC Machined of 7075-T6 Aluminum, Type III Hard-Coat Anodized
BARREL: Chrome Moly Vanadium Steel, Cold Hammer Forged, 1:8, 10.3? S2W Profile, Salt Bath Nitride Finished, and HP/MPI Tested
GAS SYSTEM: Pinned Low-Profile Gas Block CNC Machined from 4140 Hardened Steel with Mil-Spec Heavy Phosphate Coating, Pistol Length, Direct Impingement
MUZZLE DEVICE: Daniel Defense Flash Suppressor, 17-4 PH Stainless Steel, Salt Bath Nitride Finished
BOLT CARRIER GROUP: M16 Profile, Mil-Spec MP Tested, Chrome Lined, Properly Staked Gas Key
BUFFER: H Buffer
SIGHTS: Sold Separately
HANDGUARD: Daniel Defense DDM4 Rail 9.0, CNC Machined from 6061-T6 Aluminum, Type III Hard-Coat Anodized
RECEIVER EXTENSION: Six-Position Mil-Spec 7075-T6 Aluminum
BUTTSTOCK: Daniel Defense Buttstock, Glass-Filled Polymer with Soft-Touch Overmolding
PISTOL GRIP: Daniel Defense Pistol Grip, Glass-Filled Polymer with Soft-Touch Overmolding
GRIP: Daniel Defense Vertical Grip, Glass-Filled Polymer with Soft-Touch Overmolding
RAIL PANELS: Daniel Defense Rail Panels made from Santoprene, Heat Resistant to 300° Fahrenheit
Made in the USA!

DDM4®300 S (Factory SBR)

The DDM4 300S was designed for those demanding a high-performance, short-barrel rifle chambered in the versatile 300 Blackout cartridge. Built around a 10.3" Strength-to-Weight (S2W) profile barrel, the 300S uses standard 5.56 bolts and magazines to deliver .30 caliber projectiles with greater muzzle energy than comparable 5.56mm platforms.  The increasingly popular 300 Blackout cartridge has proven itself to be extremely efficient in short-barrel rifles, yielding superior ballistics over the venerable 7.62x39 cartridge.  With a wide variety of factory ammunition made for everything from home defense, target shooting, hunting, suppressed operation, and tactical applications, the 300S is capable of delivering exceptional performance from a compact, fast-handling package.

DDM4®V7®p (300 Blackout)(Mil Spec +®)

This highly maneuverable pistol pairs a 10.3" barrel and the MFR 9.0 rail for fast handling, accuracy, and reliability while also providing compatibility with a wide variety of muzzle devices and sound suppressors for even more customization. A variation of the DDM4V7 S, it features the SB Tactical SOB Pistol Stabilizing Brace and is classified as a pistol, not a short-barreled rifle, so it does not require ATF approval and a tax stamp. The Daniel Defense DDM4V7 P features M-LOK attachment technology, our Mil Spec + Cerakote and comes equipped with a rugged and comfortable Daniel Defense pistol grip with integral trigger guard and soft touch overmolding.

DDM4®V7®p (300 Blackout)(Mil Spec +®)

This highly maneuverable pistol pairs a 10.3" barrel and the MFR 9.0 rail for fast handling, accuracy, and reliability while also providing compatibility with a wide variety of muzzle devices and sound suppressors for even more customization. A variation of the DDM4V7 S, it features the SB Tactical SOB Pistol Stabilizing Brace and is classified as a pistol, not a short-barreled rifle, so it does not require ATF approval and a tax stamp. The Daniel Defense DDM4V7 P features M-LOK attachment technology, our Mil Spec + Cerakote and comes equipped with a rugged and comfortable Daniel Defense pistol grip with integral trigger guard and soft touch overmolding.

DDM4®V7®

The Daniel Defense V7 is the first rifle in the DDM4 lineup to feature the M-LOK® attachment technology with the Daniel Defense MFR 15.0 rail. Built around a Cold Hammer Forged, 16" barrel, the V7 has a DD improved Flash Suppressor to reduce flash signature. The mid-length gas system provides smooth and reliable cycling under any condition and reduces both perceived recoil and wear on moving parts.  A free-floating MFR 15.0 handguard offers incredible weight savings as well as superior cooling, ergonomics, and modularity while maintaining the strength and durability expected from Daniel Defense. With the M-LOK attachment points that run along 7 positions and an uninterrupted 1913 Picatinny rail on top, the V7 has plenty of room for the sights, optics, and accessories the user may require.  The rifle is finished off with the rugged and comfortable Daniel Defense Buttstock and Pistol grip.

DETAILS

The Daniel Defense V7 is the first rifle in the DDM4 lineup to feature the M-LOK attachment technology with the Daniel Defense MFR 15.0 rail. Built around a Cold Hammer Forged, 16” barrel, the V7 has a DD improved Flash Suppressor to reduce flash signature. The mid-length gas system provides smooth and reliable cycling under any condition and reduces both perceived recoil and wear on moving parts. A free-floating MFR 15.0 handguard offers incredible weight savings as well as superior cooling, ergonomics, and modularity while maintaining the strength and durability expected from Daniel Defense. With the M-LOK attachment points that run along 7 positions and an uninterrupted 1913 Picatinny rail on top, the V7 has plenty of room for the sights, optics, and accessories the user may require. The new independently ambi GRIP-N-RIP Charging Handle accommodates left- and right-handed shooters and is engineered for suppressed fire, with anti-gas features that redirect gas flow upward and away from the face and operator. The rifle is finished off with the rugged and comfortable Daniel Defense Buttstock and Pistol Grip.

DETAILS

The Daniel Defense V7 is the first rifle in the DDM4 lineup to feature the M-LOK attachment technology with the Daniel Defense MFR 15.0 rail. Built around a Cold Hammer Forged, 16” barrel, the V7 has a DD improved Flash Suppressor to reduce flash signature. The mid-length gas system provides smooth and reliable cycling under any condition and reduces both perceived recoil and wear on moving parts. A free-floating MFR 15.0 handguard offers incredible weight savings as well as superior cooling, ergonomics, and modularity while maintaining the strength and durability expected from Daniel Defense. With the M-LOK attachment points that run along 7 positions and an uninterrupted 1913 Picatinny rail on top, the V7 has plenty of room for the sights, optics, and accessories the user may require. The new independently ambi GRIP-N-RIP Charging Handle accommodates left- and right-handed shooters and is engineered for suppressed fire, with anti-gas features that redirect gas flow upward and away from the face and operator. The rifle is finished off with the rugged and comfortable Daniel Defense Buttstock and Pistol Grip.