Accessories

GG&G continues to be the only manufacturer of Lens Covers For The EOTech XPS Scopes.  These patented lens covers fit between the EOTech XPS2-0 and 3-0 hood and the body of the EOTech housing. They are spring operated so that once pressure is applied to release them from the closed position, they spring open. The rear cover lays across the top, so as not to interfere with the field of view. The front cover opens and serves as a sun shield. However, if heavy brush etc. is encountered, the front lens cover will fold back so that it is not damaged. Because of the contours of the EOTech housing, these covers are not 100% waterproof, but they do prevent most dust, debris, rain and snow from accumulating on the lenses.

• Installs easily with provided tool.
• No alteration needed to optic.
• Aids in protecting the optic's lenses.
• The EOTech XPS2-0 and XPS3-0 spring loaded lens covers are easily operated.
• Front lens cover opens to serve as a sun shade.
• Front lens cover can be folded to lie on top of folded rear cover.
• Rear lens cover folds flat on top of the protective hood.
• Ambidextrous activation tabs on front and rear cover offer tactical flexibility.
• Four different engraving options available for the lens covers.
• Weight: Less than 1.0 oz.
• Made In America By Men And Women Proud To Be Americans!

GG&G continues to be the only manufacturer of Lens Covers For The EOTech XPS Scopes.  These patented lens covers fit between the EOTech XPS2-0 and 3-0 hood and the body of the EOTech housing. They are spring operated so that once pressure is applied to release them from the closed position, they spring open. The rear cover lays across the top, so as not to interfere with the field of view. The front cover opens and serves as a sun shield. However, if heavy brush etc. is encountered, the front lens cover will fold back so that it is not damaged. Because of the contours of the EOTech housing, these covers are not 100% waterproof, but they do prevent most dust, debris, rain and snow from accumulating on the lenses.

• Installs easily with provided tool.
• No alteration needed to optic.
• Aids in protecting the optic's lenses.
• The EOTech XPS2-0 and XPS3-0 spring loaded lens covers are easily operated.
• Front lens cover opens to serve as a sun shade.
• Front lens cover can be folded to lie on top of folded rear cover.
• Rear lens cover folds flat on top of the protective hood.
• Ambidextrous activation tabs on front and rear cover offer tactical flexibility.
• Four different engraving options available for the lens covers.
• Weight: Less than 1.0 oz.

GG&G continues to be the only manufacturer of Lens Covers For The EOTech XPS Scopes.  These patented lens covers fit between the EOTech XPS2-0 and 3-0 hood and the body of the EOTech housing. They are spring operated so that once pressure is applied to release them from the closed position, they spring open. The rear cover lays across the top, so as not to interfere with the field of view. The front cover opens and serves as a sun shield. However, if heavy brush etc. is encountered, the front lens cover will fold back so that it is not damaged. Because of the contours of the EOTech housing, these covers are not 100% waterproof, but they do prevent most dust, debris, rain and snow from accumulating on the lenses.

• Installs easily with provided tool.
• No alteration needed to optic.
• Aids in protecting the optic's lenses.
• The EOTech XPS2-0 and XPS3-0 spring loaded lens covers are easily operated.
• Front lens cover opens to serve as a sun shade.
• Front lens cover can be folded to lie on top of folded rear cover.
• Rear lens cover folds flat on top of the protective hood.
• Ambidextrous activation tabs on front and rear cover offer tactical flexibility.
• Four different engraving options available for the lens covers.
• Weight: Less than 1.0 oz.

GG&G continues to be the only manufacturer of Lens Covers For The EOTech XPS Scopes.  These patented lens covers fit between the EOTech XPS2-0 and 3-0 hood and the body of the EOTech housing. They are spring operated so that once pressure is applied to release them from the closed position, they spring open. The rear cover lays across the top, so as not to interfere with the field of view. The front cover opens and serves as a sun shield. However, if heavy brush etc. is encountered, the front lens cover will fold back so that it is not damaged. Because of the contours of the EOTech housing, these covers are not 100% waterproof, but they do prevent most dust, debris, rain and snow from accumulating on the lenses.

• Installs easily with provided tool.
• No alteration needed to optic.
• Aids in protecting the optic's lenses.
• The EOTech XPS2-0 and XPS3-0 spring loaded lens covers are easily operated.
• Front lens cover opens to serve as a sun shade.
• Front lens cover can be folded to lie on top of folded rear cover.
• Rear lens cover folds flat on top of the protective hood.
• Ambidextrous activation tabs on front and rear cover offer tactical flexibility.
• Four different engraving options available for the lens covers.
• Weight: Less than 1.0 oz.

The GG&G EOTech Lens Covers fit between the EOTech hood and the body of the EOTech housing. They are spring operated so that once pressure is applied to release them from the closed position, they spring open. The rear cover lays across the top, so as not to interfere with the field of view. The front cover opens and serves as a sun shield. However, if heavy brush etc. is encountered, the front lens will fold back so that it is not damaged. Because of the contours of the EOTech housing, these rifle scope lens covers are not 100% waterproof, but they do prevent most dust, debris, rain and snow from accumulating on the lenses.

• Installs easily with provided tool.
• No alteration needed to optic.
• Aids in protecting the optic's lenses.
• Spring loaded lens covers are easily operated.
• Front lens cover opens to serve as a sun shade.
• Front lens cover can be folded to lay on top of folded rear cover.
• Rear lens cover folds flat on top of the protective hood.
• Ambidextrous activation tabs on front and rear cover offer tactical flexibility.
• 5 different engraving options available.
• Weight: Less than 1.0 oz.
• Made In America By Men And Women Proud To Be Americans!

The GG&G EOTech Lens Covers fit between the EOTech hood and the body of the EOTech housing. They are spring operated so that once pressure is applied to release them from the closed position, they spring open. The rear cover lays across the top, so as not to interfere with the field of view. The front cover opens and serves as a sun shield. However, if heavy brush etc. is encountered, the front lens will fold back so that it is not damaged. Because of the contours of the EOTech housing, these rifle scope lens covers are not 100% waterproof, but they do prevent most dust, debris, rain and snow from accumulating on the lenses. Law Enforcement and Miliitary Orders for GGG-1275 please reference NSN-585 501 620 915.

• Installs easily with provided tool.
• No alteration needed to optic.
• Aids in protecting the optic's lenses.
• Spring loaded lens covers are easily operated.
• Front lens cover opens to serve as a sun shade.
• Front lens cover can be folded to lay on top of folded rear cover.
• Rear lens cover folds flat on top of the protective hood.
• Ambidextrous activation tabs on front and rear cover offer tactical flexibility.
• 5 different engraving options available.
• Weight: Less than 1.0 oz.

The GG&G EOTech Lens Covers fit between the EOTech hood and the body of the EOTech housing. They are spring operated so that once pressure is applied to release them from the closed position, they spring open. The rear cover lays across the top, so as not to interfere with the field of view. The front cover opens and serves as a sun shield. However, if heavy brush etc. is encountered, the front lens will fold back so that it is not damaged. Because of the contours of the EOTech housing, these rifle scope lens covers are not 100% waterproof, but they do prevent most dust, debris, rain and snow from accumulating on the lenses. Law Enforcement and Miliitary Orders for GGG-1275 please reference NSN-585 501 620 915.

• Installs easily with provided tool.
• No alteration needed to optic.
• Aids in protecting the optic's lenses.
• Spring loaded lens covers are easily operated.
• Front lens cover opens to serve as a sun shade.
• Front lens cover can be folded to lay on top of folded rear cover.
• Rear lens cover folds flat on top of the protective hood.
• Ambidextrous activation tabs on front and rear cover offer tactical flexibility.
• 5 different engraving options available.
• Weight: Less than 1.0 oz.

The GG&G EOTech Lens Covers fit between the EOTech hood and the body of the EOTech housing. They are spring operated so that once pressure is applied to release them from the closed position, they spring open. The rear cover lays across the top, so as not to interfere with the field of view. The front cover opens and serves as a sun shield. However, if heavy brush etc. is encountered, the front lens will fold back so that it is not damaged. Because of the contours of the EOTech housing, these rifle scope lens covers are not 100% waterproof, but they do prevent most dust, debris, rain and snow from accumulating on the lenses. Law Enforcement and Miliitary Orders for GGG-1275 please reference NSN-585 501 620 915.

• Installs easily with provided tool.
• No alteration needed to optic.
• Aids in protecting the optic's lenses.
• Spring loaded lens covers are easily operated.
• Front lens cover opens to serve as a sun shade.
• Front lens cover can be folded to lay on top of folded rear cover.
• Rear lens cover folds flat on top of the protective hood.
• Ambidextrous activation tabs on front and rear cover offer tactical flexibility.
• 5 different engraving options available.
• Weight: Less than 1.0 oz.

In order to meet all of the EOTech protective hood configurations, provide easy installation and keep the price competitive, we are offering our patented lens covers with a new enhanced 6061 T6 aluminum hood in a lens cover combo package for these EOTech holographic scopes: The GG&G Hood And Lens Cover Combo will fit EOTech models 516, 517, SU-231/PEQ 553, 555, 556 and 557.

• Installs easily with provided tool.
• No alteration needed to the EOTech Red Dot Scope.
• Aids in protecting the optic's lenses.
• Spring loaded EOTech lens covers are easily operated.
• Front lens cover opens to serve as a sun shade.
• Front lens cover can be folded to lie on top of folded rear cover.
• Four different engraving options are available for the lens covers.
• Rear lens cover folds flat on top of the protective hood.
• Ambidextrous activation tabs on front and rear cover offer tactical flexibility.
• Because of the contours of the EOTech body, these rifle scope lens covers are not 100% waterproof, but they do prevent most dust, debris, rain and snow from accumulating on the lenses.
• Material: The EOTech Scope protective hood is manufactured from Aircraft Grade 6061-T6 Aluminum.
• Finish: The protective hood is Type III hard coat anodized in a non-reflective black Mil-Spec finish to provide combat durability.
• All of the windage and elevation calibration markings on the GG&G hood are fully engraved and present an off-white appearance to make it easier for the end user to reference.
• Weight: Less than 3.0 oz.

In order to meet all of the EOTech protective hood configurations, provide easy installation and keep the price competitive, we are offering our patented lens covers with a new enhanced 6061 T6 aluminum hood in a lens cover combo package for these EOTech holographic scopes: The GG&G Hood And Lens Cover Combo will fit EOTech models 516, 517, SU-231/PEQ 553, 555, 556 and 557.

• Installs easily with provided tool.
• No alteration needed to the EOTech Red Dot Scope.
• Aids in protecting the optic's lenses.
• Spring loaded EOTech lens covers are easily operated.
• Front lens cover opens to serve as a sun shade.
• Front lens cover can be folded to lie on top of folded rear cover.
• Four different engraving options are available for the lens covers.
• Rear lens cover folds flat on top of the protective hood.
• Ambidextrous activation tabs on front and rear cover offer tactical flexibility.
• Because of the contours of the EOTech body, these rifle scope lens covers are not 100% waterproof, but they do prevent most dust, debris, rain and snow from accumulating on the lenses.
• Material: The EOTech Scope protective hood is manufactured from Aircraft Grade 6061-T6 Aluminum.
• Finish: The protective hood is Type III hard coat anodized in a non-reflective black Mil-Spec finish to provide combat durability.
• All of the windage and elevation calibration markings on the GG&G hood are fully engraved and present an off-white appearance to make it easier for the end user to reference.
• Weight: Less than 3.0 oz.

In order to meet all of the EOTech protective hood configurations, provide easy installation and keep the price competitive, we are offering our patented lens covers with a new enhanced 6061 T6 aluminum hood in a lens cover combo package for these EOTech holographic scopes: The GG&G Hood And Lens Cover Combo will fit EOTech models 516, 517, SU-231/PEQ 553, 555, 556 and 557.

• Installs easily with provided tool.
• No alteration needed to the EOTech Red Dot Scope.
• Aids in protecting the optic's lenses.
• Spring loaded EOTech lens covers are easily operated.
• Front lens cover opens to serve as a sun shade.
• Front lens cover can be folded to lie on top of folded rear cover.
• Four different engraving options are available for the lens covers.
• Rear lens cover folds flat on top of the protective hood.
• Ambidextrous activation tabs on front and rear cover offer tactical flexibility.
• Because of the contours of the EOTech body, these rifle scope lens covers are not 100% waterproof, but they do prevent most dust, debris, rain and snow from accumulating on the lenses.
• Material: The EOTech Scope protective hood is manufactured from Aircraft Grade 6061-T6 Aluminum.
• Finish: The protective hood is Type III hard coat anodized in a non-reflective black Mil-Spec finish to provide combat durability.
• All of the windage and elevation calibration markings on the GG&G hood are fully engraved and present an off-white appearance to make it easier for the end user to reference.
• Weight: Less than 3.0 oz.

In order to meet all of the EOTech protective hood configurations, provide easy installation and keep the price competitive, we are offering our patented lens covers with a new enhanced 6061 T6 aluminum hood in a lens cover combo package for these EOTech holographic scopes: The GG&G Hood And Lens Cover Combo will fit EOTech models 516, 517, SU-231/PEQ 553, 555, 556 and 557.

• Installs easily with provided tool.
• No alteration needed to the EOTech Red Dot Scope.
• Aids in protecting the optic's lenses.
• Spring loaded EOTech lens covers are easily operated.
• Front lens cover opens to serve as a sun shade.
• Front lens cover can be folded to lie on top of folded rear cover.
• Four different engraving options are available for the lens covers.
• Rear lens cover folds flat on top of the protective hood.
• Ambidextrous activation tabs on front and rear cover offer tactical flexibility.
• Because of the contours of the EOTech body, these rifle scope lens covers are not 100% waterproof, but they do prevent most dust, debris, rain and snow from accumulating on the lenses.
• Material: The EOTech Scope protective hood is manufactured from Aircraft Grade 6061-T6 Aluminum.
• Finish: The protective hood is Type III hard coat anodized in a non-reflective black Mil-Spec finish to provide combat durability.
• All of the windage and elevation calibration markings on the GG&G hood are fully engraved and present an off-white appearance to make it easier for the end user to reference.
• Weight: Less than 3.0 oz.

In order to meet all of the EOTech protective hood configurations, provide easy installation and keep the price competitive, we are offering our patented lens covers with a new enhanced 6061 T6 aluminum hood in a lens cover combo package for these EOTech holographic scopes: The GG&G Hood And Lens Cover Combo will fit EOTech models 516, 517, SU-231/PEQ 553, 555, 556 and 557.

• Installs easily with provided tool.
• No alteration needed to the EOTech Red Dot Scope.
• Aids in protecting the optic's lenses.
• Spring loaded EOTech lens covers are easily operated.
• Front lens cover opens to serve as a sun shade.
• Front lens cover can be folded to lie on top of folded rear cover.
• Four different engraving options are available for the lens covers.
• Rear lens cover folds flat on top of the protective hood.
• Ambidextrous activation tabs on front and rear cover offer tactical flexibility.
• Because of the contours of the EOTech body, these rifle scope lens covers are not 100% waterproof, but they do prevent most dust, debris, rain and snow from accumulating on the lenses.
• Material: The EOTech Scope protective hood is manufactured from Aircraft Grade 6061-T6 Aluminum.
• Finish: The protective hood is Type III hard coat anodized in a non-reflective black Mil-Spec finish to provide combat durability.
• All of the windage and elevation calibration markings on the GG&G hood are fully engraved and present an off-white appearance to make it easier for the end user to reference.
• Weight: Less than 3.0 oz.

In order to meet all of the EOTech protective hood configurations, provide easy installation and keep the price competitive, we are offering our patented lens covers with a new enhanced 6061 T6 aluminum hood in a lens cover combo package for these EOTech holographic scopes: The GG&G Hood And Lens Cover Combo will fit EOTech models 516, 517, SU-231/PEQ 553, 555, 556 and 557.

• Installs easily with provided tool.
• No alteration needed to the EOTech Red Dot Scope.
• Aids in protecting the optic's lenses.
• Spring loaded EOTech lens covers are easily operated.
• Front lens cover opens to serve as a sun shade.
• Front lens cover can be folded to lie on top of folded rear cover.
• Four different engraving options are available for the lens covers.
• Rear lens cover folds flat on top of the protective hood.
• Ambidextrous activation tabs on front and rear cover offer tactical flexibility.
• Because of the contours of the EOTech body, these rifle scope lens covers are not 100% waterproof, but they do prevent most dust, debris, rain and snow from accumulating on the lenses.
• Material: The EOTech Scope protective hood is manufactured from Aircraft Grade 6061-T6 Aluminum.
• Finish: The protective hood is Type III hard coat anodized in a non-reflective black Mil-Spec finish to provide combat durability.
• All of the windage and elevation calibration markings on the GG&G hood are fully engraved and present an off-white appearance to make it easier for the end user to reference.
• Weight: Less than 3.0 oz.

In order to meet all of the EOTech protective hood configurations, provide easy installation and keep the price competitive, we are offering our patented lens covers with a new enhanced 6061 T6 aluminum hood in a lens cover combo package for these EOTech holographic scopes: The GG&G Hood And Lens Cover Combo will fit EOTech models 516, 517, SU-231/PEQ 553, 555, 556 and 557.

• Installs easily with provided tool.
• No alteration needed to the EOTech Red Dot Scope.
• Aids in protecting the optic's lenses.
• Spring loaded EOTech lens covers are easily operated.
• Front lens cover opens to serve as a sun shade.
• Front lens cover can be folded to lie on top of folded rear cover.
• Four different engraving options are available for the lens covers.
• Rear lens cover folds flat on top of the protective hood.
• Ambidextrous activation tabs on front and rear cover offer tactical flexibility.
• Because of the contours of the EOTech body, these rifle scope lens covers are not 100% waterproof, but they do prevent most dust, debris, rain and snow from accumulating on the lenses.
• Material: The EOTech Scope protective hood is manufactured from Aircraft Grade 6061-T6 Aluminum.
• Finish: The protective hood is Type III hard coat anodized in a non-reflective black Mil-Spec finish to provide combat durability.
• All of the windage and elevation calibration markings on the GG&G hood are fully engraved and present an off-white appearance to make it easier for the end user to reference.
• Weight: Less than 3.0 oz.

In order to meet all of the EOTech protective hood configurations, provide easy installation and keep the price competitive, we are offering our patented lens covers with a new enhanced 6061 T6 aluminum hood in a lens cover combo package for these EOTech holographic scopes: The GG&G Hood And Lens Cover Combo will fit EOTech models 516, 517, SU-231/PEQ 553, 555, 556 and 557.

• Installs easily with provided tool.
• No alteration needed to the EOTech Red Dot Scope.
• Aids in protecting the optic's lenses.
• Spring loaded EOTech lens covers are easily operated.
• Front lens cover opens to serve as a sun shade.
• Front lens cover can be folded to lie on top of folded rear cover.
• Four different engraving options are available for the lens covers.
• Rear lens cover folds flat on top of the protective hood.
• Ambidextrous activation tabs on front and rear cover offer tactical flexibility.
• Because of the contours of the EOTech body, these rifle scope lens covers are not 100% waterproof, but they do prevent most dust, debris, rain and snow from accumulating on the lenses.
• Material: The EOTech Scope protective hood is manufactured from Aircraft Grade 6061-T6 Aluminum.
• Finish: The protective hood is Type III hard coat anodized in a non-reflective black Mil-Spec finish to provide combat durability.
• All of the windage and elevation calibration markings on the GG&G hood are fully engraved and present an off-white appearance to make it easier for the end user to reference.
• Weight: Less than 3.0 oz.

In order to meet the many EOTech protective hood configurations, provide easy installation and keep the price point competitive, we decided to offer our patented lens covers with a new enhanced 6061 T6 aluminum hood in a lens cover combo package for the EOTech EXPS holographic scopes. For those of you that want to keep the battery retention wire set up, we have pre-drilled the hood in the same location as the original, and have included a new battery cap retention wire and figure 8 wire clamps for your use.

• IMPORTANT: The EXPS Hood & Lens Cover Combo Will Not Fit the XPS Series of scopes.
• Installs easily with provided tool.
• No alteration needed to the EOTech EXPS Scope.
• Aids in protecting the optic's lenses.
• Spring loaded EOTech lens covers are easily operated.
• Front lens cover opens to serve as a sun shade.
• Front lens cover can be folded to lie on top of folded rear cover.
• Four different engraving options are available for the lens covers.
• Rear lens cover folds flat on top of the protective hood.
• Ambidextrous activation tabs on front and rear cover offer tactical flexibility.
• Because of the contours of the EOTech body, these rifle scope lens covers are not 100% waterproof, but they do prevent most dust, debris, rain and snow from accumulating on the lenses.
• Material: The EOTech EXPS Scope protective hood is manufactured from Aircraft Grade 6061-T6 Aluminum.
• Finish: The protective hood is Type III hard coat anodized in a non-reflective black Mil-Spec finish to provide combat durability.
• All of the windage and elevation calibration markings on the GG&G hood are fully engraved and present an off-white appearance to make it easier for the end user to reference.
• Weight: Less than 3.0 oz.
• Made In America By Men And Women Proud To Be Americans!

In order to meet the many EOTech protective hood configurations, provide easy installation and keep the price point competitive, we decided to offer our patented lens covers with a new enhanced 6061 T6 aluminum hood in a lens cover combo package for the EOTech EXPS holographic scopes. For those of you that want to keep the battery retention wire set up, we have pre-drilled the hood in the same location as the original, and have included a new battery cap retention wire and figure 8 wire clamps for your use.

The GG&G EOTech EXPS Hood And Lens Cover Combo will fit EOTech models EXPS2-0, EXPS2-2, EXPS3-0, EXPS3-2 and EXPS3-4.

• Installs easily with provided tool.
• No alteration needed to the EOTech EXPS Scope.
• Aids in protecting the optic's lenses.
• Spring loaded EOTech lens covers are easily operated.
• Front lens cover opens to serve as a sun shade.
• Front lens cover can be folded to lie on top of folded rear cover.
• Four different engraving options are available for the lens covers.
• Rear lens cover folds flat on top of the protective hood.
• Ambidextrous activation tabs on front and rear cover offer tactical flexibility.
• Because of the contours of the EOTech body, these rifle scope lens covers are not 100% waterproof, but they do prevent most dust, debris, rain and snow from accumulating on the lenses.
• Material: The EOTech EXPS Scope protective hood is manufactured from Aircraft Grade 6061-T6 Aluminum.
• Finish: The protective hood is Type III hard coat anodized in a non-reflective black Mil-Spec finish to provide combat durability.
• All of the windage and elevation calibration markings on the GG&G hood are fully engraved and present an off-white appearance to make it easier for the end user to reference.
• Weight: Less than 3.0 oz.

In order to meet the many EOTech protective hood configurations, provide easy installation and keep the price point competitive, we decided to offer our patented lens covers with a new enhanced 6061 T6 aluminum hood in a lens cover combo package for the EOTech EXPS holographic scopes. For those of you that want to keep the battery retention wire set up, we have pre-drilled the hood in the same location as the original, and have included a new battery cap retention wire and figure 8 wire clamps for your use.

The GG&G EOTech EXPS Hood And Lens Cover Combo will fit EOTech models EXPS2-0, EXPS2-2, EXPS3-0, EXPS3-2 and EXPS3-4.

• Installs easily with provided tool.
• No alteration needed to the EOTech EXPS Scope.
• Aids in protecting the optic's lenses.
• Spring loaded EOTech lens covers are easily operated.
• Front lens cover opens to serve as a sun shade.
• Front lens cover can be folded to lie on top of folded rear cover.
• Four different engraving options are available for the lens covers.
• Rear lens cover folds flat on top of the protective hood.
• Ambidextrous activation tabs on front and rear cover offer tactical flexibility.
• Because of the contours of the EOTech body, these rifle scope lens covers are not 100% waterproof, but they do prevent most dust, debris, rain and snow from accumulating on the lenses.
• Material: The EOTech EXPS Scope protective hood is manufactured from Aircraft Grade 6061-T6 Aluminum.
• Finish: The protective hood is Type III hard coat anodized in a non-reflective black Mil-Spec finish to provide combat durability.
• All of the windage and elevation calibration markings on the GG&G hood are fully engraved and present an off-white appearance to make it easier for the end user to reference.
• Weight: Less than 3.0 oz.

In order to meet the many EOTech protective hood configurations, provide easy installation and keep the price point competitive, we decided to offer our patented lens covers with a new enhanced 6061 T6 aluminum hood in a lens cover combo package for the EOTech EXPS holographic scopes. For those of you that want to keep the battery retention wire set up, we have pre-drilled the hood in the same location as the original, and have included a new battery cap retention wire and figure 8 wire clamps for your use.

The GG&G EOTech EXPS Hood And Lens Cover Combo will fit EOTech models EXPS2-0, EXPS2-2, EXPS3-0, EXPS3-2 and EXPS3-4.

• Installs easily with provided tool.
• No alteration needed to the EOTech EXPS Scope.
• Aids in protecting the optic's lenses.
• Spring loaded EOTech lens covers are easily operated.
• Front lens cover opens to serve as a sun shade.
• Front lens cover can be folded to lie on top of folded rear cover.
• Four different engraving options are available for the lens covers.
• Rear lens cover folds flat on top of the protective hood.
• Ambidextrous activation tabs on front and rear cover offer tactical flexibility.
• Because of the contours of the EOTech body, these rifle scope lens covers are not 100% waterproof, but they do prevent most dust, debris, rain and snow from accumulating on the lenses.
• Material: The EOTech EXPS Scope protective hood is manufactured from Aircraft Grade 6061-T6 Aluminum.
• Finish: The protective hood is Type III hard coat anodized in a non-reflective black Mil-Spec finish to provide combat durability.
• All of the windage and elevation calibration markings on the GG&G hood are fully engraved and present an off-white appearance to make it easier for the end user to reference.
• Weight: Less than 3.0 oz.

In order to meet the many EOTech protective hood configurations, provide easy installation and keep the price point competitive, we decided to offer our patented lens covers with a new enhanced 6061 T6 aluminum hood in a lens cover combo package for the EOTech EXPS holographic scopes. For those of you that want to keep the battery retention wire set up, we have pre-drilled the hood in the same location as the original, and have included a new battery cap retention wire and figure 8 wire clamps for your use.

• IMPORTANT: The EXPS Hood & Lens Cover Combo Will Not Fit the XPS Series of scopes. If you need lens covers for your EOTech XPS Scope, Click Here.
• Installs easily with provided tool.
• No alteration needed to the EOTech EXPS Scope.
• Aids in protecting the optic's lenses.
• Spring loaded EOTech lens covers are easily operated.
• Front lens cover opens to serve as a sun shade.
• Front lens cover can be folded to lie on top of folded rear cover.
• Four different engraving options are available for the lens covers.
• Rear lens cover folds flat on top of the protective hood.
• Ambidextrous activation tabs on front and rear cover offer tactical flexibility.
• Because of the contours of the EOTech body, these rifle scope lens covers are not 100% waterproof, but they do prevent most dust, debris, rain and snow from accumulating on the lenses.
• Material: The EOTech EXPS Scope protective hood is manufactured from Aircraft Grade 6061-T6 Aluminum.
• Finish: The protective hood is Type III hard coat anodized in a non-reflective black Mil-Spec finish to provide combat durability.
• All of the windage and elevation calibration markings on the GG&G hood are fully engraved and present an off-white appearance to make it easier for the end user to reference.
• Weight: Less than 3.0 oz.
• Made In America By Men And Women Proud To Be Americans!

In order to meet the many EOTech protective hood configurations, provide easy installation and keep the price point competitive, we decided to offer our patented lens covers with a new enhanced 6061 T6 aluminum hood in a lens cover combo package for the EOTech EXPS holographic scopes. For those of you that want to keep the battery retention wire set up, we have pre-drilled the hood in the same location as the original, and have included a new battery cap retention wire and figure 8 wire clamps for your use.

The GG&G EOTech EXPS Hood And Lens Cover Combo will fit EOTech models EXPS2-0, EXPS2-2, EXPS3-0, EXPS3-2 and EXPS3-4.

• Installs easily with provided tool.
• No alteration needed to the EOTech EXPS Scope.
• Aids in protecting the optic's lenses.
• Spring loaded EOTech lens covers are easily operated.
• Front lens cover opens to serve as a sun shade.
• Front lens cover can be folded to lie on top of folded rear cover.
• Four different engraving options are available for the lens covers.
• Rear lens cover folds flat on top of the protective hood.
• Ambidextrous activation tabs on front and rear cover offer tactical flexibility.
• Because of the contours of the EOTech body, these rifle scope lens covers are not 100% waterproof, but they do prevent most dust, debris, rain and snow from accumulating on the lenses.
• Material: The EOTech EXPS Scope protective hood is manufactured from Aircraft Grade 6061-T6 Aluminum.
• Finish: The protective hood is Type III hard coat anodized in a non-reflective black Mil-Spec finish to provide combat durability.
• All of the windage and elevation calibration markings on the GG&G hood are fully engraved and present an off-white appearance to make it easier for the end user to reference.
• Weight: Less than 3.0 oz.

In order to meet the many EOTech protective hood configurations, provide easy installation and keep the price point competitive, we decided to offer our patented lens covers with a new enhanced 6061 T6 aluminum hood in a lens cover combo package for the EOTech EXPS holographic scopes. For those of you that want to keep the battery retention wire set up, we have pre-drilled the hood in the same location as the original, and have included a new battery cap retention wire and figure 8 wire clamps for your use.

The GG&G EOTech EXPS Hood And Lens Cover Combo will fit EOTech models EXPS2-0, EXPS2-2, EXPS3-0, EXPS3-2 and EXPS3-4.

• Installs easily with provided tool.
• No alteration needed to the EOTech EXPS Scope.
• Aids in protecting the optic's lenses.
• Spring loaded EOTech lens covers are easily operated.
• Front lens cover opens to serve as a sun shade.
• Front lens cover can be folded to lie on top of folded rear cover.
• Four different engraving options are available for the lens covers.
• Rear lens cover folds flat on top of the protective hood.
• Ambidextrous activation tabs on front and rear cover offer tactical flexibility.
• Because of the contours of the EOTech body, these rifle scope lens covers are not 100% waterproof, but they do prevent most dust, debris, rain and snow from accumulating on the lenses.
• Material: The EOTech EXPS Scope protective hood is manufactured from Aircraft Grade 6061-T6 Aluminum.
• Finish: The protective hood is Type III hard coat anodized in a non-reflective black Mil-Spec finish to provide combat durability.
• All of the windage and elevation calibration markings on the GG&G hood are fully engraved and present an off-white appearance to make it easier for the end user to reference.
• Weight: Less than 3.0 oz.

In order to meet the many EOTech protective hood configurations, provide easy installation and keep the price point competitive, we decided to offer our patented lens covers with a new enhanced 6061 T6 aluminum hood in a lens cover combo package for the EOTech EXPS holographic scopes. For those of you that want to keep the battery retention wire set up, we have pre-drilled the hood in the same location as the original, and have included a new battery cap retention wire and figure 8 wire clamps for your use.

The GG&G EOTech EXPS Hood And Lens Cover Combo will fit EOTech models EXPS2-0, EXPS2-2, EXPS3-0, EXPS3-2 and EXPS3-4.

• Installs easily with provided tool.
• No alteration needed to the EOTech EXPS Scope.
• Aids in protecting the optic's lenses.
• Spring loaded EOTech lens covers are easily operated.
• Front lens cover opens to serve as a sun shade.
• Front lens cover can be folded to lie on top of folded rear cover.
• Four different engraving options are available for the lens covers.
• Rear lens cover folds flat on top of the protective hood.
• Ambidextrous activation tabs on front and rear cover offer tactical flexibility.
• Because of the contours of the EOTech body, these rifle scope lens covers are not 100% waterproof, but they do prevent most dust, debris, rain and snow from accumulating on the lenses.
• Material: The EOTech EXPS Scope protective hood is manufactured from Aircraft Grade 6061-T6 Aluminum.
• Finish: The protective hood is Type III hard coat anodized in a non-reflective black Mil-Spec finish to provide combat durability.
• All of the windage and elevation calibration markings on the GG&G hood are fully engraved and present an off-white appearance to make it easier for the end user to reference.
• Weight: Less than 3.0 oz.

EOTech has many hood configurations. In order to meet those configurations, provide easy installation and keep the price point competitive, we offer our patented EOTech 558 Lens Covers with a new enhanced 6061-T6 aluminum hood in a combo package.

• Installs easily with provided tool.
• No alteration needed to the EOTech 558 Scope.
• Aids in protecting the optic's lenses.
• Spring loaded EOTech lens covers are easily operated.
• Front lens cover opens to serve as a sun shade.
• Front lens cover can be folded to lie on top of folded rear cover.
• Four different engraving options are available for the lens covers.
• Rear lens cover folds flat on top of the protective hood.
• Ambidextrous activation tabs on front and rear cover offer tactical flexibility.
• Because of the contours of the EOTech body, these rifle scope lens covers are not 100% waterproof, but they do prevent most dust, debris, rain and snow from accumulating on the lenses.
• Material: The EOTech 558 Scope protective hood is manufactured from Aircraft Grade 6061-T6 Aluminum.
• Finish: The protective hood is Type III hard coat anodized in a non-reflective black Mil-Spec finish to provide combat durability.
• All of the windage and elevation calibration markings on the GG&G hood are fully engraved and present an off-white appearance to make it easier for the end user to reference.
• Weight: Adds less than 1.0 oz.
• Made In America By Men And Women Proud To Be Americans!

EOTech has many hood configurations. In order to meet those configurations, provide easy installation and keep the price point competitive, we offer our patented EOTech 558 Lens Covers with a new enhanced 6061-T6 aluminum hood in a combo package.

• Installs easily with provided tool.
• No alteration needed to the EOTech 558 Scope.
• Aids in protecting the optic's lenses.
• Spring loaded EOTech lens covers are easily operated.
• Front lens cover opens to serve as a sun shade.
• Front lens cover can be folded to lie on top of folded rear cover.
• Four different engraving options are available for the lens covers.
• Rear lens cover folds flat on top of the protective hood.
• Ambidextrous activation tabs on front and rear cover offer tactical flexibility.
• Because of the contours of the EOTech body, these rifle scope lens covers are not 100% waterproof, but they do prevent most dust, debris, rain and snow from accumulating on the lenses.
• Material: The EOTech 558 Scope protective hood is manufactured from Aircraft Grade 6061-T6 Aluminum.
• Finish: The protective hood is Type III hard coat anodized in a non-reflective black Mil-Spec finish to provide combat durability.
• All of the windage and elevation calibration markings on the GG&G hood are fully engraved and present an off-white appearance to make it easier for the end user to reference.
• Weight: Adds less than 1.0 oz.

EOTech has many hood configurations. In order to meet those configurations, provide easy installation and keep the price point competitive, we offer our patented EOTech 558 Lens Covers with a new enhanced 6061-T6 aluminum hood in a combo package.

• Installs easily with provided tool.
• No alteration needed to the EOTech 558 Scope.
• Aids in protecting the optic's lenses.
• Spring loaded EOTech lens covers are easily operated.
• Front lens cover opens to serve as a sun shade.
• Front lens cover can be folded to lie on top of folded rear cover.
• Four different engraving options are available for the lens covers.
• Rear lens cover folds flat on top of the protective hood.
• Ambidextrous activation tabs on front and rear cover offer tactical flexibility.
• Because of the contours of the EOTech body, these rifle scope lens covers are not 100% waterproof, but they do prevent most dust, debris, rain and snow from accumulating on the lenses.
• Material: The EOTech 558 Scope protective hood is manufactured from Aircraft Grade 6061-T6 Aluminum.
• Finish: The protective hood is Type III hard coat anodized in a non-reflective black Mil-Spec finish to provide combat durability.
• All of the windage and elevation calibration markings on the GG&G hood are fully engraved and present an off-white appearance to make it easier for the end user to reference.
• Weight: Adds less than 1.0 oz.

EOTech has many hood configurations. In order to meet those configurations, provide easy installation and keep the price point competitive, we offer our patented EOTech 518 Lens Covers with a new enhanced 6061-T6 aluminum hood in a combo package.

• Installs easily with provided tool.
• No alteration needed to the EOTech 518 Scope.
• Aids in protecting the optic's lenses.
• Spring loaded EOTech lens covers are easily operated.
• Front lens cover opens to serve as a sun shade.
• Front lens cover can be folded to lie on top of folded rear cover.
• Four different engraving options are available for the lens covers.
• Rear lens cover folds flat on top of the protective hood.
• Ambidextrous activation tabs on front and rear cover offer tactical flexibility.
• Because of the contours of the EOTech body, these rifle scope lens covers are not 100% waterproof, but they do prevent most dust, debris, rain and snow from accumulating on the lenses.
• Material: The EOTech 518 Scope protective hood is manufactured from Aircraft Grade 6061-T6 Aluminum.
• Finish: The protective hood is Type III hard coat anodized in a non-reflective black Mil-Spec finish to provide combat durability.
• All of the windage and elevation calibration markings on the GG&G hood are fully engraved and present an off-white appearance to make it easier for the end user to reference.
• Weight: Adds less than 1.0 oz.
• Made In America By Men And Women Proud To Be Americans!

EOTech has many hood configurations. In order to meet those configurations, provide easy installation and keep the price point competitive, we offer our patented EOTech 518 Lens Covers with a new enhanced 6061-T6 aluminum hood in a combo package.

• Installs easily with provided tool.
• No alteration needed to the EOTech 518 Scope.
• Aids in protecting the optic's lenses.
• Spring loaded EOTech lens covers are easily operated.
• Front lens cover opens to serve as a sun shade.
• Front lens cover can be folded to lie on top of folded rear cover.
• Four different engraving options are available for the lens covers.
• Rear lens cover folds flat on top of the protective hood.
• Ambidextrous activation tabs on front and rear cover offer tactical flexibility.
• Because of the contours of the EOTech body, these rifle scope lens covers are not 100% waterproof, but they do prevent most dust, debris, rain and snow from accumulating on the lenses.
• Material: The EOTech 518 Scope protective hood is manufactured from Aircraft Grade 6061-T6 Aluminum.
• Finish: The protective hood is Type III hard coat anodized in a non-reflective black Mil-Spec finish to provide combat durability.
• All of the windage and elevation calibration markings on the GG&G hood are fully engraved and present an off-white appearance to make it easier for the end user to reference.
• Weight: Adds less than 1.0 oz.

EOTech has many hood configurations. In order to meet those configurations, provide easy installation and keep the price point competitive, we offer our patented EOTech 518 Lens Covers with a new enhanced 6061-T6 aluminum hood in a combo package.

• Installs easily with provided tool.
• No alteration needed to the EOTech 518 Scope.
• Aids in protecting the optic's lenses.
• Spring loaded EOTech lens covers are easily operated.
• Front lens cover opens to serve as a sun shade.
• Front lens cover can be folded to lie on top of folded rear cover.
• Four different engraving options are available for the lens covers.
• Rear lens cover folds flat on top of the protective hood.
• Ambidextrous activation tabs on front and rear cover offer tactical flexibility.
• Because of the contours of the EOTech body, these rifle scope lens covers are not 100% waterproof, but they do prevent most dust, debris, rain and snow from accumulating on the lenses.
• Material: The EOTech 518 Scope protective hood is manufactured from Aircraft Grade 6061-T6 Aluminum.
• Finish: The protective hood is Type III hard coat anodized in a non-reflective black Mil-Spec finish to provide combat durability.
• All of the windage and elevation calibration markings on the GG&G hood are fully engraved and present an off-white appearance to make it easier for the end user to reference.
• Weight: Adds less than 1.0 oz.

EOTech has many hood configurations. In order to meet those configurations, provide easy installation and keep the price point competitive, we offer our patented EOTech 518 Lens Covers with a new enhanced 6061-T6 aluminum hood in a combo package.

• Installs easily with provided tool.
• No alteration needed to the EOTech 518 Scope.
• Aids in protecting the optic's lenses.
• Spring loaded EOTech lens covers are easily operated.
• Front lens cover opens to serve as a sun shade.
• Front lens cover can be folded to lie on top of folded rear cover.
• Four different engraving options are available for the lens covers.
• Rear lens cover folds flat on top of the protective hood.
• Ambidextrous activation tabs on front and rear cover offer tactical flexibility.
• Because of the contours of the EOTech body, these rifle scope lens covers are not 100% waterproof, but they do prevent most dust, debris, rain and snow from accumulating on the lenses.
• Material: The EOTech 518 Scope protective hood is manufactured from Aircraft Grade 6061-T6 Aluminum.
• Finish: The protective hood is Type III hard coat anodized in a non-reflective black Mil-Spec finish to provide combat durability.
• All of the windage and elevation calibration markings on the GG&G hood are fully engraved and present an off-white appearance to make it easier for the end user to reference.
• Weight: Adds less than 1.0 oz.

• One Piece Picatinny Scope Rail
• 5.0 Inches overall length
• Machined to Mil Spec tolerances
• Constructed from 6061 aluminum, hard coat anodized for a lifetime of service
• Includes mounting screws
• 100% Made in U.S.A. with a lifetime warranty
• Also works with Henry 38/357, 44 Mag, and 45 Colt receivers
• Weight 1.6oz